Expert Service 1-877-289-7664 [Hours]

Marathon Graphic Equalizer & Microphone Combo

15-Band Stereo Graphic Equalizer + Cardioid Dynamic Vocal Microphone + 25 ft. XLR Microphone Cable

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Marathon EQ-215 Features
  • Professional 15-Band Stereo Graphic Equalizer
  • Separate gain controls
  • Individual 1/3" Octave sliders for fine tuning each frequency
  • Easy to read controls and LED indicators
  • Front Panel Features:
    • On/Off Switch
    • Channel Level
    • Low Cut LED Indicators
    • Low Cut Switch
    • Channel Bypass LED Indicators
  • Rear Panel Features:
    • Input Connectors 1/4 XLR
    • Output Connectors 1/4 XLR
    • Power Connection
    • AC Voltage Selector Switch
    • Fuse Compartment
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Marathon EQ-215 Specifications
  • Frequency Bands: 2 x 15 1/3 Octave
  • Input Impedance: 20K ohms Unbalanced 40K ohms Balanced
  • THD: 0.05%
  • Signal to Noise: >95dBu
  • Channel Separation: Better than 50dB
  • Output Impedance: 330 ohms
  • Max Output Level: +21dB
  • Range: +/-6dB, +/-12dB
  • Range of Filter Control: +/- 12dB Select
  • Power Consumption: 100-120V/200-230V, 50/60Hz
  • Dimensions: 6"D x 19"W x 2-1/2"H
Audio Technica ATM-410 Features
  • Tailored for smooth, natural vocal reproduction
  • Durable performance for professional applications
  • Superior anti-shock engineering for low handling noise
  • Excellent off-axis rejection for minimum feedback
  • Hi-ENERGY neodymium magnet for improved output and transient response
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  • Quiet-Flex stand clamp provides silent, flexible microphone positioning
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged, all-metal design and construction for years of trouble-free use
  • Dimensions: 6-11/16"L x 2-1/8"W
  • 1-year Manufacturer's warranty
Audio Technica ATM-410 Specifications
  • Element: Dynamic
  • Polar Pattern: Cardioid
  • Frequency Response: 90-16,000 Hz
  • Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
  • Impedance: 300 ohms
  • Weight: 8.2 oz (233 g)
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Hosa MCL-125 Features
  • 25 ft. XLR3F to XLR3M Microphone Cable
  • High-Quality components and world-class manufacturing
  • XLR connectors feature internal strain relief for enhanced reliability
  • Oxygen-Free Copper conductors for excellent signal clarity
  • Hi-density OFC braided shield provides superior EMI and RFI rejection
  • 1-year Manufacturer's warranty

Equalizer Specifications

Type of Equalizer
This determines the way the equalizer processes the signal from the source unit. A parametric equalizer allows to you adjust the center point of the frequency band you are adjusting as well the bandwidth which can be narrowed or widened. A graphic equalizer has fixed frequency bands and bandwidth and only the frequency bands can be adjusted. A digital equalizer uses a software program to tune your system.
A graphic equalizer typically has more adjustable bands and is less expensive, whereas a parametric will have fewer bands but offer a greater level of control and provide more tuning options. Digital equalizers will tune your system with the most detail and precision but require a computer and are typically a little higher in price.
Equalizer Bands
The number of graphic or parametric equalizer bands the receiver has. The better the EQ, the more likely you will be able to "tweak" your sounds to your desire.
15 band
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

None
Built-in Bass Reconstruction
Bass reconstructors, or bass enhancers, improve low frequency reproduction in a car audio system with at least one subwoofer. These bass expander products will help your subs produce accurate bass thumps.
No
Line Driver
A line driver is a small amplifier used to support the strength of the audio signal coming from the source unit.
No
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Total Number of Inputs
This is the total number of input connections that go into the unit.
Total Number of Outputs
This is the total number of output connections that the unit will produce.
Button Color
Refers to the color of the physical buttons on the unit.
Silver
Max Output Level
The maximum level (in volts) of signal output. A higher level will increase the clarity and boost your signal.
21 dB
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.05%
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>95 dB
Width
The width of the item from left to right (side-to-side) measured in inches.
19"
Height
The height of the item, measured from top to bottom, in inches.
2-1/2"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
6"

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

EQ-215_ATM-410_MCL-125

Weight

8.18lbs

Internal SKU

eq215_atm410_mcl125

Internal Product ID

39757

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Marathon Graphic Equalizer & Microphone Combo