Pack of Two 468 UF 100-Volt Non-Polar 10% Bass Blocker Capacitors
Product highlights
Pack of Two 468 uF Non-Polar 10% Bass Blocker Capacitors • Removes Selected Frequencies from the Audio Source • 100 Volts • Protects the Speakers from Receiving Damaging Frequencies • 85 Hz @ 4 Ohm
Learn more about the bb468
| Crossover Frequency (Hertz) | 8 Ohm | 4 Ohm | 2 Ohm |
| 80 | 248.44 uF | 496.88 uF | 993.75 uF |
| 100 | 198.75 uF | 397.50 uF | 795.00 uF |
| 120 | 165.63 uF | 331.25 uF | 662.50 uF |
| 150 | 132.50 uF | 265.00 uF | 530.00 uF |
| 200 | 99.38 uF | 198.75 uF | 397.50 uF |
| 280 | 70.98 uF | 141.96 uF | 283.93 uF |
| 400 | 49.69 uF | 99.38 uF | 198.75 uF |
| 600 | 33.13 uF | 66.25 uF | 132.50 uF |
| 800 | 24.84 uF | 49.69 uF | 99.38 uF |
| 1000 | 19.88 uF | 39.75 uF | 79.50 uF |
| 1200 | 16.56 uF | 33.13 uF | 66.25 uF |
| 2000 | 9.94 uF | 19.88 uF | 39.75 uF |
| 4000 | 4.97 uF | 9.94 uF | 19.88 uF |
| 5000 | 3.98 uF | 7.95 uF | 15.90 uF |
| 6000 | 3.31 uF | 6.63 uF | 13.25 uF |
| 8000 | 2.48 uF | 4.97 uF | 9.94 uF |
| 10000 | 1.99 uF | 3.98 uF | 7.95 uF |
| 12000 | 1.66 uF | 3.31 uF | 6.63 uF |
Best selling similar products
Bass Blockers • Removes Low Frequency Sounds • 0-5.6 kHz @ 4 Ohm • 0-2.8 kHz @ 8 Ohm • Black Wire Color
(12)
$12.99
List price $19.00
&bull Pair of Bass Blockers for 6" x 9" Speakers
• Blocks 0-300Hz @ 4 Ohm
• Blocks 0-150Hz @ 8 Ohm
• Filters Out Unwanted Frequencies Towards Speakers
(13)
$15.99
List price $29.00
&bull Pair of Bass Blockers For 4" Speakers
• Blocks 0-1200 Hz @ 4 Ohm
• Blocks 0-600 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts
(7)
$12.99
List price $19.00
Manufacturer:
Model Number:
BB468
Weight:
0.11lbs
Internal SKU:
bb468
Internal Product ID:
40129
| 5 star |
|
80% |
| 4 star |
|
0% |
| 3 star |
|
20% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
These are ok but not great.
I purchased these for my infinity kappa's hoping that they would protect my purchase from over excursion but... They seem to work but i wouldn't suggest these for a car! They seem to make the speakers quieter somewhat and the quality is changed it seems muffled. Right now they are sitting in my closet and the manufactures claim of crossover seems wrong they seem to cut bass above 120hz making the speakers difficult to blend with subwoofers. I would suggest getting an amp that has a subsonic filter instead of these.
28 found this helpful
Great!
They worked real well for what I was wanting just to get that low end out and they are easy to install. However if you are wanting to protect your speakers from bass get some higher frequency as I found that a 100hz doesn't block much but works great if you have speakers that can take it.
24 found this helpful
Good Product
Good product for the money. Don't expect the resolution of a high end crossover, but they will definitely reduce the low end notes to smaller speakers.
23 found this helpful
They seam to work.
I used these for new door speakers to limit the bass since I was also installing a sub. My subs hit around this frequency, so I probably should have gotten a higher frequency filter for my door speakers but these seem to do their job.
23 found this helpful
Good Bass Blocker
Not much to say about these. They function as advertised and have saved my smaller speakers from bass pounding.
12 found this helpful
iPhone 3G and 3GS Impact Series Silicone Case with Clear Protective Screen Film
$14.99
List price $19.95
MTX Audio Thunderform DDQC10U (Black, Unloaded)
Unloaded Single 10" Custom-fit Bass Slammer Subwoofer Enclosure for 2000-2004 Dodge Dakota Quad Cab
(2)
$349.95
List price $449.95
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
