 |
Make Sure You Have Everything You Need!
Nearly all cars require an immobilizer bypass to add a remote start system. Click here to add one to your order! |
A Push to the Future
C3-RS601 is a great add-on remote starter for vehicles with smart keys and push-to-start technology. Small size with improved range performance over the XT-11 for remote start plus a dedicated unlock button for vehicles that lock out the factory smart key when the vehicle has been remote started.
Key Features:
- Remote Car Starter with 2-Way Data Port
- 2-Way data/serial port for integration with C3 and OEM bypass modules
- (Two) XT-12 Two-button remote transmitters with S.A.W. technology
- New Negative and Positive (- & +) Door Lock Outputs
- New Programmable Lock / Unlock pulse times w/ double pulse
- Negative channel 3 trunk pop output
- Window-mount super heterodyne SAW receiver. RX-300A
- Ultra small unit size with Micro K relays
- Dash mounted LED and Valet switch
- GM starter timing for no start wire vehicles
- Relays on-board: Parking lights, Starter, Accessory, Ignition #1, Ignition #2
- Output for Ignition #3
- Temporary Stop Feature (short stops with the engine running/no key)
- 200ma ground programmable output for horn or factory security rearm
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
Programmable Features:
- One pulse or three pulse start for adding-on to an existing aftermarket or factory security / keyless entry system Factory keyless door locking before & after start
- Ignition control door locks (on / off)
- ‘Safety Start’- Two or One push on the start button- (default= 2 Push)
- Gasoline or diesel engine + ‘Low or High check levels
- Remote start: voltage type, RPM/Tachometer learning type or timer checking type + Run Time: 5, 10, 20, or 30 minutes (default=20 minutes)
Product History:
|
|
|
(newest, current model)
|
|
|
|
(previous model, replaced by AutoPage C3-RS-601)
|
|
Average Customer Rating is 5.0 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability |
|
4.8 |
| Value |
|
4.8 |
| Features |
|
5.0 |
| Design |
|
4.0 |
| Usability |
|
5.0 |
|
what's this?
|
|
|
Most Helpful Customer Reviews:
|
Review by
naga from nepa
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I have installed thousands of remote starts in past have only owned a few and install was sweet. programming took longer than install very good range would buy another !
|
|
Review by
BlackGyver from Acton, CA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I've had this remote start for a few months now and it works great. There is not much to it so it is simple to use. BTW, I got the OLMDBALL and it plugged in fine.
|
|
Review by
cliff from lorain, OH
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Good product except the D2D port wasnt the same as the cable from the bypass module (xpresskit pkfm).
|
|
Review by
Joe from Des Plaines, IL
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Great unit, works wonderfully. I've used about 10 of them, since they were released. If you're in the market for a good quality remote starter for a great deal, look no further.
|
