Custom Pods Containing a Pair of M770-TCS-SG-TB for 2007-Up Can-Am Spyder RS Roadster
Quantity: 1
Pod Features:
 |
 |
- For 2007-Up Can-Am Spyder RS Roadster
- Wired for a 4 ohm load each
- Custom build fiberglass, texture-coated weather proofed pods
- Each pod is loaded with one 7.7" 2-way component speakers
- Installs on the sides near the dashboard of the vehicle
- Project cleand and powerful sound in open air
- Professional black sleek finish
- Speaker grilles inclused for added protection
- Also found as: JL Audio 94490, SBCANPODS1M770, JL Audio Stealthbox Can-Am RS Roadster
Speaker Features:
- 7.7" 2-Way M-Series Marine Tower Component System
- Power Handling:
- RMS: 200 watts per set/ 100 watts each side
- Recommended Power Range: 40 - 175 watts RMS each
- Color: Black Frame w/ Titanium Sport Grille
- Injection-molded, mica-filled polypropylene cone with UV inhibitors
- True 2-way networks with 1st order low-pass and 2nd order high-pass circuits
- Centrex® UVresistant polymer baskets and grilles
- DMA-optimized, long excursion design
- Polyswitch solid-state tweeter protection
- Synthetic rubber surround
- 1.00" pure silk dome tweeter
- 1.25" (32mm) voice coil
- Low-profile/ progressive-roll spider
- Frequency Response: 45 - 25,000 Hz
- Sensitivity: 91.0 dB
*JL Audio Stealthboxes are special-ordered for each customer and usually ship within 7-14 business days. As such, orders for Stealthboxes cannot be canceled unless it is unavailable.
250W RMS 8" W3v3 Series Single 4-Ohm Subwoofer
Quantity: 1
Product Features:
|
 |
 |
 |
 |
 |
 |
 |
- 8" W3v3 Series Subwoofer Driver
- Power Handling:
- RMS: 250 watts
- Recommended Power Range: 75 - 250 watts
- Impedance: Single 4-Ohm
- Injection-molded, mineral-filled polypropylene cone
- Nitrile butadiene rubber surround
- Stamped steel basket
- Customization trim ring
- Floating-cone attach method
- Highly linear, DMA-Optimized motor system
- Insert molded suspension, coil and terminal sub-assembly
- Patented vented reinforcement collar (VRC®)
- Elevated frame cooling design
- Nickel plated brass spring terminals
- Engineered lead-wire design and attachments
- Mounting depth: 4.63 "
- Cutout dimensions: 7.09 "
- Free Air Resonance (Fs): 35.14 Hz
- Sensitivity: 83.24 dB
- Xmax: 10.0 mm
- Reference Efficiency (no): 0.1300%
- Frequency response: ~28 ~ 250 Hz
- Matching Amplifiers:
JL Audio XD400/4v2
400W XDv2 Series 4-Channel Class D Full-Range Amplifier with High-Speed NexD Switching Design
Quantity: 1
General Features:
 |
 |
 |
- XDv2 Series Class D 4-Channel Amplifier
- RMS Power Rating @14.4V:
- 4 ohm: 75 watts x 4 chan.
- 2 ohm: 100 watts x 4 chan.
- Bridged 4 ohm: 200 watts x 2 chan.
- RMS Power Rating @12.5V:
- 4 ohm: 60 watts x 4 chan.
- 2 ohm: 90 watts x 4 chan.
- Bridged 4 ohm: 180 watts x 2 chan.
- NexD High Speed Switching Class D Technology
- LED power (green), over-current (yellow) and protect (red) indicators
- Advanced Rollback Protection
- Differential Balanced RCA Input
- Pass-through preamp RCA outputs
- Selectable turn-on modes: REM / Offset / Signal
- +12 V Remote Turn-On: Traditional remote lead wire, from headunit
- DC Offset-Sensing: On/Off by detecting a very small DC signal (high-level signal only)
- Signal-Sensing: On/Off by detecting a full-range audio signal at left-channel input (high-level signal only)
- Heavy duty aluminum alloy heat-sink for extreme heat dissipation
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Detented, Calibrated Filter Freq. Potentiometer
- State-variable, 12dB/octave Butterworth Crossover
- Input sensitivity:
- Low level: 800mV - 8V
- High level: 200mV - 2V
- Frequency Response: 12 - 22,000 Hz
- Total Harmonic Distortion (THD): <1%
- Signal to Noise Ratio: >104 dB
- Damping Factor @4 ohm: >150 / 50 Hz
- Selectable Filter Mode: Off / HP / LP
- variable cutoff filter: 50 - 500 Hz, 12 dB/octave
- Fuse Rating: 40A x 1 inline (not supplied)
- Weight: 4.20 lb
- Dimensions: 7.09"W x 6.85"L x 2.05"H
 |
Check out the JL Audio XD400/4v2 Owner's Manual
Remote Level Control for JL Audio HD / MHD Amplifiers
Quantity: 1
General Features
- Remote Level Control for JL Audio HD, XD, MHD and M Series amplifiers
- Adjust the overall level of the amplifier from the front of the vehicle
- Intended to be Flush Mounted
- Requires access to rear of desired panel location
- Requires a 3/8" hole to be drilled
- Low-profile design for custom-look installations
- Includes 18 ft. control cable
- Black ABS Knob
- Mounting hardware included
- Black plastic replacement knob available, sold separately: JL Audio Black Knob
- Satin-Finish Aluminum replacement knob available, sold separately: JL Audio Aluminum Knob
Check out the JL Audio HD-RLC Owner's Manual
