Audio Technica AT4040SP

AT4040 Features:

1. Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity.
2. Technically advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics.
3. Externally polarized (DC bias) true condenser design.
4. Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections.
5. Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of highspeed transients.
6. State-of-the-art surface-mount electronics ensure compliance with AT’s stringent consistency and reliability standards.

AT4041 Features:

• Smooth, extended frequency response with a slight rise occurring in the high-frequency region
• Ideal for drum overheads, acoustic guitar, piano, horns and under snare
• Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
• Transformerless circuitry virtually eliminates low-frequency distortion
• Provides superior correlation of high-speed transients
• State-of-the-art design and manufacturing techniques ensure compliance with AT's strict standards
• Switchable hi-pass filter and rugged turned-brass microphone housing

What's In The Box?

1. (1) AT4040 Side-Address Cardioid Condenser Microphone
2. (1) AT4041 Cardioid Condenser Microphone
3. (1) AT8449 Shock Mount for 5/8"-27 Threaded Stands
4. (1) AT8405a Stand Clamp
5. (1) AT8159 Windscreen
6. (1) Protective Wooden Storage Case

AT4040 Specifications:

• Element: Externally-polarized (DC bias) condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
• Impedance: 100 ohm
• Maximum Input Sound Level:
• 145 dB SPL, 1 kHz at 1% T.H.D.
• 155 dB SPL, with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range (Typical): 133 dB, 1 kHz at Max SPL
• Signal-To-Noise Ratio: 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 4.2 mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Size & Weight:
• Weight: 12.7 oz (360 g)
• Height: 6.69" (170 mm)
• Diameter: 2.10" (53.4 mm)
• Output Connector: Integral 3-pin XLRM-type
• Audio Technica Case Style: R1
• Also found as: AT-4040, A-T4040, AT4-040, AT40-40, AT404-0
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty
• Click here for downloadable PDF of these specifications

AT4041 Specifications:

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -36 dB (15.8 mV) re 1V at 1 Pa
• Impedance: 100 ohm
• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range (Typical): 121 dB, 1 kHz at Max SPL
• Signal-To-Noise Ratio: 70 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 3.2 mA typical
• Switches: Flat, roll-off
• Size & Weight:
• Weight: 4.2 oz (120 g)
• Height: 6.28" (159.5 mm)
• Diameter: 0.83" (21 mm)
• Output Connector: Integral 3-pin XLRM-type
• Audio Technica Case Style: S1
• Also found as: AT-4041, A-T4041, AT4-041, AT40-41, AT404-1
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty
• Click here for downloadable PDF of these specifications

AT4040 Polar Pattern & Frequency Response Charts:

AT4041 Polar Pattern & Frequency Response Charts: