Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

JL Audio CP106LG-W3v3

150W Microsub Slot-Ported Enclosure Loaded w/ W3V3 Series 6-1/2" Subwoofer

Out of Stock - Backorder
|

List price $259.95

$199.95

with warranty

You Save: $60.00 (23.08%)

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Bundled Savings with this Product

=

25% off an NVX Sound Damping Trunk Kit with Purchase!

With purchase of any NVX subwoofer, you can save 25% on an NVX trunk kit that contains 20 sq. ft. of quality sound dampening material. This material quiets vibrations, stops rattles, and increases the subwoofer SPL.

15.00

44218

4

JL Audio CP106LG-W3v3

$199.95

+

25% OFF

NVX SDTK20

$59.99

Special Price $44.99 ($59.99 if purchased separately)

NVX SDTK20

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

(Offer 1 of 1)

Combined Total Price

$244.94

You Save $15.00

Amazing Bass For Limited Space

The CP106LG-W3v3 MicroSub is a compact bass solution for vehicles with limited space such as trucks or convertibles. This slot-ported enclosure is loaded with one 4-ohm 6W3v3-4 woofer. The W3v3 subwoofer is one of the cleanest, most efficient, and best sounding subwoofers in its class. The W3v3 features a DM Optimized Motor System that provides constant and strong linear excursion that result in reduced distortion and higher bass reproduction. These woofers also feature Elevated Frame Cooling technology that delivers cool air directly to the voice coil of the woofer. This increases power handling and sound quality. The W3v3 series subwoofers offer many more patented technologies that truly make this series stand out above the rest. If you are struggling on a decision, JL Audio will never disappoint.

The enclosure features top quality MDF (medium density fiberboard), cut using state-of-the-art CNC woodworking equipment, and covered with high-grade automotive carpeting. Extensive interior bracing permits the use of thinner MDF that maximizes the enclosure's internal volume relative to its exterior volume. Each driver is also protected by a black steel-mesh grille. It also features a side firing slot port. The flared port opening minimizes turbulence and improves overall fidelity. The port is a 1/2" high and 4-1/8" wide at the opening.


 

Subwoofer Features:

  • 6-1/2" Single 4 ohm W3v3 Series Subwoofer
  • Power Handling:
    • Peak: 300 watts
    • Recommended Power Range (RMS): 50-150 watts
  • Final Impedance: 4 ohm
  • Mineral-filled polypropylene cone woofer
  • Rubber surround
  • DMA optimized motor system
  • Elevated frame cooling
  • Vented reinforcement collar
  • Floating Cone Attach Method (FCAM)
  • Insert molded suspension, coil, and terminal-sub assembly
  • Surround stress relief design
  • Sensitivity: 80 dB
  • 1-year SonicElectronix.com warranty
JL Audio 6W3v34 Recommended Power Range

General Enclosure Features:

  • Microsub Enclosure
  • Finished in black high-grade automotive carpeting with JL Audio white stitching
  • Extensive interior bracing
  • Slot-Ported
  • Subwoofer cutout diameter (or dimension): 5-1/2"
  • Dimensions: 5-1/4" (6-5/8" with grille)D x 14-1/4"W x 9-3/4"H
  • Port Dimensions: 1/2"H 4-1/8 1/2"W

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
W3v3 (JL Audio)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
6.5"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
150 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
300 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Mineral-Filled Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
80 dB

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Vented / Ported
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
1
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
9-3/4"
Width
The width of the item from left to right (side-to-side) measured in inches.
14-1/4"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
5-1/4""
Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
6-5/8" with grille
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
1
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Binding posts
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
100%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
3.0
Value
3.0
Features
5.0
Design
4.0
Usability
5.0

Aaron

Tempe, AZ

Overall
Durability
Value
Features
Design
Usability

Awesome

March 18, 2013

Probably the most underrated pre-made sub/box I have used, truly awesome performance. I have read several other reviews from other sites, and was extremely skeptical, but I will agree, this is basically as good if not better than a budget 10" sub. Pro's, awesome output for its size, and great tight response. Con's, my carpet was already fraying out of the box, and the positive terminal was over tightened, and basically "stripped". If you're limited on size, this will more than do it for you, I had less than 1/8th " to spare, and the box didn't let me down, I just wish the carpet was better. Lastly, it does upset me they "Recommend" 150 watts RMS max, when, the driver is beyond underrated, be sure to throw some power at it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $59.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $12.99

Product Summary

Manufacturer

Model Number

CP106LG-W3v3

UPC

699440933001

Weight

14.00lbs

Internal SKU

cp106lgw3v3

Internal Product ID

44218

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JL Audio CP106LG-W3v3