Expert Service 1-877-289-7664 [Hours]

Labor Day Sale

Lanzar OPTI2000D

2000W Max Monoblock Class D OptiDrive Series Car Amplifier

In Stock
|

Get bigger discounts with our bundled Savings: View All Deals!

List price $799.99

You Save: $510.00 (63.75%)

$289.99

with warranty

+ FREE Shipping in US 48

Order within 8 hrs 15 mins to ship today

Arrives by Tuesday, Sept. 8 to zip 20147

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Tue, Sept. 8

Item Added to Cart

Lanzar OPTI2000D

2000W Max Monoblock Class D OptiDrive Series Car Amplifier

$289.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$32.99
Add Warranty
3 years of protection

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!

$149.99

Add
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$79.99

Add
XS Power D925

12-Volt Deep Cycle AGM Power Cell with 2000 Max Amps

$169.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Lanzar OPTI2000D.

Get FAST answers from customers ASK a Question See questions answers

General Features

  • OptiDrive Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 700 watts x 1 chan.
    • 2 ohms: 1100 watts x 1 chan.
    • 1.3 ohm: 1600 watts x 1 chan.
    • 1 ohm: (Not Specified by Manufacture)
  • Max Power Rating:
    • 0.5 ohm: 2000 watts x 1 chan.
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Soft Start Turn-on
  • Double sided Epoxy PCB circuit board
  • Mono channel operation
  • 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Gold-plated RCA level inputs
  • Custom Terminal Block for speaker connections
  • Input sensitivity: 200V - 8V
  • Variable low-pass filter: 50 - 150 Hz, 24 dB/octave
  • Subsonic filter: 15 - 40 Hz, 24 dB/octave)
  • Selectable phase Shift: 0 - 180°
  • Variable bass boost: 0 - +18 dB
  • Total harmonic distortion: 0.1%
  • Signal to noise ratio: 90 dB
  • Damping factor: >400 @ 20Hz, 4 ohms
  • Frequency response: 15 - 150 Hz ±3 dB
  • Fuse rating: 30A x 6
  • Dimensions: 19-1/8"L x 10-11/16"W x 2-1/8"H
  • 0 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


Check out the Lanzar OPTI2000D Owner's Manual

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
700 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1100 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
Not Specified by Manufacturer

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
OptiDrive (Lanzar)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

2000 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

1600 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
2 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
0.5 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
Subsonic
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 150 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
15 - 40 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
90 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
30A x 6 
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
Yes
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Not Tested

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
91%
4 Star
9%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.6
Value
4.9
Features
4.4
Design
4.4
Usability
4.7
Rob

North Platte, NE

Overall
Durability
Value
Features
Design
Usability
Best amp I have ever owned!

December 9, 2011

Cant beat the price for the quality of opti!

30 of 52 found this helpful

Was this review helpful to you?

Melvin

Hampton, VA

Overall
Durability
Value
Features
Design
Usability
Great Value

November 16, 2012

This amp is the best bang for your buck. I own 5 of them. Powerful and great sounding. I love them. I have one on my JL audio 13W7. OMG! It rattles my teeth and brain. Love it,love it,looooooooove it.

24 of 44 found this helpful

Was this review helpful to you?

Jesse

Paducah, KY

Overall
Durability
Value
Features
Design
Usability
great amp

February 22, 2013

had a hifonics amp blew it in 30 min this amp to my two 12 they are 2000rms each one amp hits hard but i order two of them so i cn master slave them

22 of 42 found this helpful

Was this review helpful to you?

luke boy

tuscaloosa al

Overall
Durability
Value
Features
Design
Usability
this is the best amp larzar make a beast pn dubs

December 13, 2011

I got this amp on four 12's, Pioneer champion series. It's on a 0.5 load it slam very hard.

23 of 44 found this helpful

Was this review helpful to you?

Slick

Flushing, OH

Overall
Durability
Value
Features
Design
Usability
Lanzar opti2000d

July 19, 2015

This amp is a brute. Make sure you do the Big 4 upgrade! And a Mechman alternator. It pulls 180 amps.... And cranks out the wattage. Its already stuck 2 Jbl gto1514D subwoofers. Doesn't get hot even in .05 ohms. Great amp thanx to sonic Electronix!

1 of 1 found this helpful

Was this review helpful to you?

Slick

Flushing, OH

Overall
Durability
Value
Features
Design
Usability
Lanzar opti2000d

July 19, 2015

This amp is a brute. Make sure you do the Big 4 upgrade! And a Mechman alternator. It pulls 180 amps.... And cranks out the wattage. Its already stuck 2 Jbl gto1514D subwoofers. Doesn't get hot even in .05 ohms. Great amp thanx to sonic Electronix!

0 of 0 found this helpful

Was this review helpful to you?

tipking

Ellenwood , GA

Overall
Durability
Value
Features
Design
Usability
Good Amp

April 16, 2015

Anyone thinking about getting this amp...get it. For $300 this is one bad ass amp. Running 2 Kicker CVX dual 2 ohms poerted. At 2 ohms this thing doesn't even warm up but beats the hell out of my kickers. At .05 ohm, it warms up but doesn't get hot and I'm scared I'll blow my subs they hit so hard. I did use true 4 gauge wiring for about 2 weeks until my 0 gauge showed up and no problems at all with the 4 gauge..even at .5 ohm. Thinking about buying another as a back up for this price.

6 of 12 found this helpful

Was this review helpful to you?

Chism

Pierceton indiana

Overall
Durability
Value
Features
Design
Usability
Great amp

August 23, 2013

This amp is a beast had it pushing two hdc3 audioques
And it pushed them with ease

21 of 42 found this helpful

Was this review helpful to you?

Rob

North Platte, Nebraska

Overall
Durability
Value
Features
Design
Usability
Nothing better!

June 12, 2012

Own 4 of these amps and they are the best there is. Excellent damping. Best value.

19 of 40 found this helpful

Was this review helpful to you?

joellyons

chauvin la

Overall
Durability
Value
Features
Design
Usability
opti drive

January 12, 2013

i have one on a fi bl 15, my door flexes like crazy and i dont think the 15 will last much longer

16 of 35 found this helpful

Was this review helpful to you?

jbampcity

l burg ky

Overall
Durability
Value
Features
Design
Usability
ok

January 6, 2012

Blew a few fuses but for price it will out pound almost most comp amps so great amp jus sucks to rebuild them.

18 of 40 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!

Your Price $149.99

Stinger SK6201 0-Gauge Wiring Kit

You only get great sound when you use great wire. This Stinger kit will do the trick! Don't forget the RCA's!

Your Price $149.99

Belva BPK0D Dual Amp 0/4-Gauge Wiring Kit

Enough wire for 2 amps! Don't forget the RCA's!

Your Price $59.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $79.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $99.99

XS Power D925

12-Volt Deep Cycle AGM Power Cell with 2000 Max Amps

Your Price $169.99

Kinetik HC2000-BLU

Kinetik BLU Series 2000 Watt 12V High Current AGM Car Audio Power Cell

Your Price $229.99

SHURiKEN SK-BT100

12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts

Your Price $245.99

Belva BB2D

2.0 Farad Capacitor with Digital Red Display

Your Price $39.99

Rockford Fosgate RFC2D

Hybrid 2.0 Farad Digital Stiffening Capacitor

Your Price $139.99

Power Acoustik PC2.0F

2.0 Farad Digital Capacitor with LED Display

Your Price $52.99

NVX XIX25 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $18.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

AudioControl THE EPICENTER-GRAY

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $199.99

AudioControl THE-EPICENTER-WHITE

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $199.99

XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

Your Price $12.99

SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

Your Price $149.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

Browse 2 questions and 2 answers
Hide answersShow all answers | Sort by
what is the required fuse? 150 or 180?
A shopper on Jul 19, 2015
Best Answer: Hello,

We assume you mean the inline fuse, which technically depends on the gauge of the wire and the run length of said wire. Obviously 0 Gauge and assuming a typical vehicle, we suggest the 180A.
Reply · Report · Rick MStaff on Jul 19, 2015
· Add Answer · I Have This Question Too (0)
wat is the best speaker to use for this?
nkosi on Jul 14, 2015
Best Answer: Hello Kendell,

We often see the RE Audio SXXv2-12D4 matched up with this amplifier.

http://www.sonicelectronix.com/item_68092_RE-Audio-SXXv2-12D4.html
Reply · Report · Rick MStaff on Jul 14, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

OPTI2000D

UPC

068888725699

Weight

19.00lbs

Internal SKU

opti2000d

Internal Product ID

4950

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Lanzar OPTI2000D