Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

RE Audio XXX 6.9C

6" x 9" 2-Way XXX Series Car Component Speakers System

Out of Stock - Backorder
|

List price $649.99

$229.99

with warranty

You Save: $420.00 (64.62%)

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

FREE Gift: Sound Dampening!

For a limited time, get a free NVX SDVK4 Versa Kit with a qualifying pair of speakers! Sound dampening will eliminate rattles, insulate against heat, and also improve the sound and output of your speakers!

19.99

60553

159

RE Audio XXX 6.9C

$229.99

+

100% OFF

NVX SDVK4

$19.99

Special Price $0 ($19.99 if purchased separately)

NVX SDVK4

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• One 18" x 32" Piece

(Offer 1 of 1)

Combined Total Price

$229.99

You Save $19.99

General Features:

  • 6" x 9" XXX Series 2-Way Component System
  • Power Handling:
    • Peak: 480 watts per set / 240 watts each side
    • RMS: 240 watts per set / 120 watts each side
  • Glass Fiber-Kevlar cone material
  • Butyl Rubber speaker surround
  • 1.1" Tetron Silk Dome tweeter design
  • Aluminum voice coil former
  • Ferro-Fluid voice coil cooling
  • 30oz. Neodymium FEA-optimized magnet motor structure
  • Aluminum Phase Plug for even sound dispersion
  • 4 ohms impedance
  • Tweeter protection circuit with high-grade Mylar capacitors
  • 12dB/Octave High-Pass crossover network
  • 6dB/Octave Low-Pass crossover network
  • Grilles and mounting hardware included
  • Top-mount depth: 3-1/2"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

Speaker Specifications

Series
This is the manufacturer product line of speakers.
XXX (RE Audio)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6" x 9"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
1-1/8"
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Silk
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Kevlar Fiber
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
240 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
120 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Not Specified by Manufacturer
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
Not Specified by Manufacturer
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
3-1/2"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
4"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
6" x 8-3/4" 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
75%
4 Star
25%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
4.8
Features
4.8
Design
4.8
Usability
4.8

Spanky808

Waipahu, HI

Overall
Durability
Value
Features
Design
Usability

Awesome speakers!

February 20, 2014

These are the first pair of RE audio xxx/c I ever owned......and these speakers, to me blew away he previous speakers I had....the sound and clarity, to me can't be beat as far as price. Tweeters kinda so-so though....running two Alpine typeX subs....and when I bump up volume, trough all that bass....those speakers pound!!!! I would highly recommend this speakers. Might get another pair from you guys thanks sonic electronic......

0 of 0 found this helpful

Help our customers find the most helpful reviews

Garrett

Montgomery, TX

Overall
Durability
Value
Features
Design
Usability

Amazing! Speakers

November 30, 2013

Tundra regular cab amazing speakers there very loud and great sound to them . There very big and barley fit in my tundra.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Sam Watts

Canada

Overall
Durability
Value
Features
Design
Usability

Even Better Than Expected

June 2, 2013

I have a set of these hooked up to a cerwin vega stroker 800.4 in my dodge magnum sxt. They blew me away from the get go and only sounded better once the settings were perfect. They have rich deep midbass and excellent highs. i would strongly recommend this component set to anyone!

0 of 0 found this helpful

Help our customers find the most helpful reviews

RICHARD

MONTGOMERY VILLAGE, MD

Overall
Durability
Value
Features
Design
Usability

GREAT SPEAKERS!

March 15, 2013

These are the best 6x9"s I have ever purchase. The tweeters are average. But the performance range of the speaker out shine the average tweeter.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $49.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $69.95

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $46.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Xscorpion USP-69 6" x 9" Speaker Baffles

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $5.99

XTC 6" x 9" Foam Speaker Baffles

Compresses and forms to the shape of most installations and reduces panel vibrations.

Your Price $12.99

Universal Stackable 6"x9" Speaker 3/4" Depth Extender

Speakers too deep for your installation location? Add an extra inch of space with these depth extenders.

Your Price $6.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

XXX6.9C

UPC

611892991774

Weight

10.50lbs

Internal SKU

xxx69c

Internal Product ID

60553

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: RE Audio XXX 6.9C