Expert Service 1-877-289-7664 [Hours]

Infinity Kappa 462.11cfp

4" x 6" 2-Way Kappa Series Coaxial Car Plate Speakers w/ FREE Sound Dampening! (Use Bundle Offer)

In Stock
|

List price $269.99

$169.99

with warranty

You Save: $100.00 (37.04%)

Arrives by Monday, Sept. 8 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

In Stock

Arrives by Mon, Sept. 8

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

Buy One Get $150 Off the Infinity Kappa 462.11cf speakers

Buy 1 pair of Infinity Kappa 462.11cf and get 88% off an additional pair!

149.59

60697

337

Infinity Kappa 462.11cfp

$169.99

+

88% OFF

Infinity Kappa 462.11cfp

$169.99

Special Price $20.4 ($169.99 if purchased separately)

Infinity Kappa 462.11cfp

Free Sound Damping w/ Select Speakers

For a limited time, get FREE NVX SDSK2 Speaker Sound Damping Kit with a qualifying pair of speakers! Sound damping eliminates rattles, insulates against heat, and also improves the sound and output of your speakers!

14.99

60697

158

Infinity Kappa 462.11cfp

$169.99

+

100% OFF

NVX SDSK2

$14.99

Special Price $0 ($14.99 if purchased separately)

NVX SDSK2

• Eliminates Road Noise
• Quiets Vibrations
• Stops Annoying Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Peel and Stick Installation
• Two 10" x 10" Pieces

(Offer 1 of 2)

Combined Total Price

$190.39

You Save $149.59

For a limited time only we are offering a free sound dampening kit with your purchase, a $49.99 value! Checkout using bundle offer above to receive this gift FREE!

High Fidelity Kappa Series

The 2-ohm nominal impedance of the Infinity Kappa 462.11cfp coaxial speakers allows compensation for any added resistance in thin factory-installed speaker wiring and provides more output than factory speakers in its class. The high sensitivity of the Kappa Series makes it ideal for upgrading a factory-installed systemís existing speakers with very noticeable fidelity improvements. The beautiful chrome inserts on the grille match modern interiors, and there are no visible mounting screws. With a modern look, articulate highs and strong lows, the Kappa series speakers are perfect for any factory or aftermarket sound system. Pick yours up today at SonicElectronix.com!

General Features:

  • 4" x 6" Kappa Series 2-Way Car Speakers
  • Power Handling:
    • Peak: 360 watts per pair / 180 watts each
    • RMS: 120 watts per pair / 60 watts each
    • Recommended Minimum Power: 25-180 watts each
  • Carbon Injected Glass Fiber cone material
  • Plus One cone technology offers more cone area than other speakers in its class
  • Rubber speaker surround
  • 1" Soft Dome edge-driven Fabric tweeter construction
  • Adjustable, 0 or +3dB push-button tweeter level attenuation control
  • UniPivot tweeter allows you to aim the tweeter at the listener for better imaging
  • High temperature voice coil reduces distortion
  • Vented magnet and motor assembly cool the voice coil
  • Gold-plated, screw-type speaker terminals for a secure connection
  • Injected Carbon Glass Matrix (iCGM) speaker frames
  • High-quality passive crossover components
  • Protective, soft, rubber-finish grilles
  • Protective magnet boot cover
  • 2 ohms impedance
  • Frequency response: 75-25,000 Hz
  • Top-mount depth: 3"
  • Sensitivity: 94dB
  • Authorized Internet Dealer
  • 3-year Manufacturer's Warranty

Priced Per Pair

Product History:

Infinity 462.11cfp thumbnail
(newest, current model)
Infinity 462.9cfp thumbnail
(previous model, replaced by Infinity Kappa 462.11cfp)

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Kappa (Infinity)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
4" x 6"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
1"
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Cloth
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Carbon Composite
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
180 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
60 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
94 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
75 - 25000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
3"
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Warranty and Return Policy

Parts Warranty Duration
3 years
Labor Warranty Duration
3 years
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
4.0
Features
5.0
Design
4.0
Usability
5.0

Eric

Missoula, MT

Overall
Durability
Value
Features
Design
Usability

Infinity Kappa = top of the line.

February 13, 2014

These speakers are awesome. They shit on the alpine type S's that were in my truck previously. WOW! Highly recommend.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $49.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $69.95

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $46.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

XTC 4" x 6" Foam Speaker Baffles

Compresses and forms to the shape of most installations.

Your Price $10.99

Items we think you might want

MM461p thumbnail

Polk Audio MM461p

• Peak Power: 150W
• RMS Power: 50W
• Woven glass composite cone woofer
• Butyl rubber surround
• 3/4" Silk, polymer dome tweeter
• Dynamic balance driver technology

Your Price $94.95

462.9cfp thumbnail

Infinity Kappa 462.9cfp

• Peak Power: 180W
• RMS Power: 60W
• Woven glass fiber cone woofer
• Rubber surround
• Edge driven MMD dome tweeter
• Direct connect computer-optimized, voice-matched outboard passive crossover

Your Price $73.50

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

462.11cfp

Weight

4.00lbs

Internal SKU

46211cfp

Internal Product ID

60697

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Infinity Kappa 462.11cfp

  • Infinity Kappa Series Speakers
  • Sonic Electronix: The X Factor when Shopping Electronics