The Hifonics Zeus ZXi8006 3/5-channel amplifier is a 1-piece installation solution to what would otherwise be a complex, space consuming difficult car audio install. All vital features and all the amplification needed to power a high-end car audio install with four upgrade speakers and a subwoofer amp system is included in the Zeus ZXi8006 amplifier. With the ZXi 8006, you will save stress, time, money and space!
The ZXi 8006 provides up to five-channels of amplification, 4-channels producing 110W RMS @ 2-ohms of real power for Front Left and Right channels, Rear Left and Right channels, plus the 5th channel, a 300W RMS subwoofer channel for the most pure bass you have ever heard. Alternatively, the ZXi 8006 has a 2 x 220W + 200W RMS subwoofer mode (@ 4 Ohms only) perfect for trucks, pickups and two-seater sports car applications. If you want something that’s truly out of this world, but is still easy to install, try dual ZXi 8006's for a system that blasts 4 x 220W for the main four channels and dual 220W subwoofer outputs.
For those who are looking to upgrade a factory OEM "In Car Entertainment" system, the ZXi 8006 offers a theater-like experience with an add-on subwoofer system. Elevate the video magic, and discover new realism in music and video, with a road theater system centered around the ZXi 8006. With its integrated AccuCross control center, the ZXi 8006 can easily create the ultimate listening experience with clarity like you have never experienced. The AccuCross with its on-board signal processing makes it easy to dial-in exactly the sound quality and tonal balance you have always desired!
- Crossover And Switching For Channels 1 & 2:
- Variable 12dB Octave Hi-Pass
- Variable 24dB Octave Low-Pass
- ±18dB Bass Boost at 45Hz
- Crossover and Switching For Channels 3 & 4:
- Variable 12dB Octave Hi-Pass
- Variable 24dB Octave Low-Pass
- ±18dB Bass Boost at 45Hz
- Inputs and Diagnostics:
- Variable Input Level Control
- Power and Diagnostics LEDs
- DC Short Circuit Protection
- Over-Load Protection
- Connector Types:
- Unbalanced Inputs (RCA’s)
- Full-Range Line Outputs (RCA’s)
- Molded 4-Gauge Power Inputs
- Molded 10-Gauge Speaker Outputs
- Crossover and Switching for Mono Amplifier:
- Variable 24dB Low-Pass
- 24dB Fixed Subsonic Filter
- 45Hz Bass EQ Bass Boost
- Hifonics New Illuminated Heat-Sink
- Design With Blue LED Light Pumps
- Hifonics Blue Illuminated Logo
- Maxxsonics Illuminated "M" End Panel Logo
- Audio-Pure Ultra-Fi™ MOSFETS
- Low-Distortion Class A/B Amplifier Circuitry
- With High-Speed MOSFET Output Devices
- Fully Adjustable Accu-Cross™ Crossovers
- 18dB Variable Bass Equalization
- Fixed 24dB Subsonic Filter
- Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply)
- SPC Simpatico Twin-Coil Design
- HSMD Hifonics Surface Mount Design
- Line Output for Amplifier Daisy Chaining
- Gold Oversized 4-Gauge Power Connectors
- 1-year SonicElectronix.com warranty
Product History: |  |
| (newest, current model) | |  |
| (previous model, replaced by Hifonics Zeus ZXi60.4 + 1K) | |  |
| (previous model, replaced by Hifonics ZXi 8010) | |  |
| (previous model, replaced by Hifonics ZXi 8008) | |  |
| (previous model, replaced by Hifonics ZXi 8006) |
|
|
Average Customer Rating is 3.8 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.2 |
| Value | | 4.6 |
| Features | | 4.2 |
| Design | | 4.2 |
| Usability | | 4.6 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
Noé from Chihuahua, 0, Mexico
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I been using this amp for almost two years and I have no complaints about it. This amp works so well that I´m surprised, because the amp never shut down for the heat or anything, besides the amp sounds very good: I run two pairs of Infinity speakers (6.5 and 6*9) and I get the most pure crystal sound from the amp, and the amp on the dark looks fantastic! I have another Hifonics amp on my sound system and both looks together GREAT on the night. The people always say that this amp it´s an art piece.
|
|
Review by
Jorden from Gilbert, AZ
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
i have a miata and I put together a custom sealed sub box with 8 5.5" tang bang drivers run down to 2 ohms, and hivi tweeters and woofers. I wanted an all in one 5 channel amp because of space restrictions so I got this amp cause I've heard good things about the brand and the price seemed great. The sound is awesome. The subs run plenty loud and the settings let me dial in my speakers without the need for any crossovers(wish there was a subsonic filter though). I can only say good things about this amp. except that the blue light might be a bit too loud.
|
|
Review by
abraham from San Antonio, TX
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I am a part time installer been dong it since I was 18 im 36 now. I installed this amp with a 10 inch kicker cvr sub running at 2 ohms and two kicker 2008 2 way 6x9's and two 6 inch kicker 2 ways for the doors. I ran all new wiring including three sets of rca's. This amp ran very very hot hotter than any other amp I ever used. The head unit would not go past 20 with the gains almost all the way down because it would shut off. I tested the output on the head unit and adjust the gains according to that it would still shut off I even upgraded the power and ground cable to stinger 4 gauge of course. The ground was bolted on not screwed because screws get loose with vibration and strip out to easy. I dont like how the adjustments are set up. there kinda confusing and takes up more time trying to adjust everything. they use a different scale system thats real wide. I was not getting full power out of this amp and my customer was very disappointed because I told her how good this brand was. I personally use autotek amps same company and they work great. I sent the amp back and was tested defective and I got credit for it this company is very reasonable as long as you don't abuse the equipment. It happens sometimes you get a bad one. I'm not sure if I would use another 5 channel amp again. I rather use a separate amp for the subs.
|
|
Review by
Jack from Wyoming, MI
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This a very good amp that outputs it's rated power pretty cleanly. You need to provide it with good signal voltage for best performance, though. If your ground is not ideal, this amp will let you know (through whining).
Also, it really needs to be actively cooled, particularly if you are mounting it recessed where the sides can be covered.
I'm not a big fan of the LEDs. Too bright for me as I can see them in my rear view mirror (Ford Escape), especially since I was trying to do a stealth build this time!
Other than that, it hits hard and doesn't b**** about it, what more do you need.
|
|
Review by
jessica from jacksonville, FL
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
this amp is AMAZING!!!!!!!!!! i use the amp to power 2 sets of polk audio db series. and it works great. i have never had any problems with it at all. no overheating problems. not one blown fuse. nothing! and since i built a custom amp rack to put under my center console. it is a very pleasing amp to look at. and i quite one if you have to mute the stereo. it make no sounds at all. trust me. absolutly a wonderfull amp. and i have tried alot of amps.
|
Customer Service
