Expert Service 1-877-289-7664 [Hours]

Belva BB2000D

2000W Max (1200W RMS) Class AB Monoblock BB Series Car Amplifier

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

bb2000dv2 thumbnail

Belva BB2000Dv2 (BB2000D v2)

OUR PRICE: $119.99

View item

Item Added to Cart

Belva BB2000D

2000W Max (1200W RMS) Class AB Monoblock BB Series Car Amplifier

$119.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$13.99
Add Warranty
3 years of protection

Belva 1.0 Farad Capacitor + Amp Kit

BB1D 1.0 Farad Capacitor + BAK42 Complete 4 Gauge Amplifier Wiring Kit

$39.99

Add
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$12.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$199.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Belva BB2000D.

Get FAST answers from customers ASK a Question See questions answers

Belva Store

BB Series: Power, Power and More Power!

The BB Series by Belva are designed to get loud! These monoblock beasts are exceptional performance amps engineered to output maximum power. If you need an amplifier that can output heavy power levels without a problem, the Belva BB Series monoblock amplifiers are right for you!

High Quality, High Power Output

These amplifiers are built with a high quality, organized circuit board. Every amplifier in the BB Series has high power output. The BB3000D is capable of outputting 1800 watts of RMS power. This amount of power is sure to be able to adequately supply most subwoofer systems with the proper amount of wattage. Belva amplifiers will keep your woofers pumping out deep bass with honest sound reproduction and reduced distortion.



General Features:

  • BB Series Monoblock Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 540 watts x 1 chan.
    • 2 ohms: 900 watts x 1 chan.
    • 1 ohm: 1200 watts x 1 chan.
  • Max power output: 2000 watts
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink
  • Input sensitivity:
    • Low level: 100mV-6mV
  • Variable low-pass filter (40-180 Hz, 12 dB/octave)
  • Subsonic filter (12 dB variable from 20Hz - 50 Hz)
  • Frequency response: 20-30,000 Hz
  • Depending on operating impedance, 1/0 or 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Product History:

Belva BB2000Dv2 thumbnail
(newest, current model)
Belva BB2000D thumbnail
(previous model, replaced by Belva BB2000Dv2 (BB2000D v2))

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
540 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
900 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1200 watts x 1 channels

Power Specifications - Subwoofer Channel

Peak Power @ 4 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

1080 watts x 1 channels
Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

1800 watts x 1 channels
Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

2000 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

2000 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

1200 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
1 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 180 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
20 - 50 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
80 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
40A x 3 
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
No
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
69%
4 Star
25%
3 Star
6%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.3
Value
4.9
Features
4.7
Design
4.4
Usability
4.7
Xspencer

Bronx, NY

Overall
Durability
Value
Features
Design
Usability
So far so good.

September 24, 2014

I needed a new amp to power my AudioPipe BD3 12, it was on a 2channel Oxygen Audio amp that only did 600w @ 2ohms. The best it could do was 1200rms bridged @ 4ohms. Anyway, I needed a "budget" amp that could push some more power. I have it wired to 2ohms and it sounds noticeably better. I've only had it for a dew days so I can't speak for longevity, but price for power rationis definitely on point.
The only bad thing I can speak on so far is the bass remote. The minute I plugged it in I got a loud feedback and noise from my sub and it froze. Idk whatn the hell that was about, but I just stayed with the bass remote from my active xover. Because of very mixed reviews In was sure to buy the warranty plan for this amp. Rather be safe than sorry.

58 of 68 found this helpful

Was this review helpful to you?

Bobby

Santee, CA

Overall
Durability
Value
Features
Design
Usability
not quite 2000 rms

May 1, 2014

Wired to 1 ohm on the scope I can see more like 1300 before this amp clips. Overall totally worth the money sound is clean have not put it in protect yet nor cooked it. Right now its pushing a pair of infinity 12s hard enough to flex every panel in the car including the hood. Would like another one for my truck due to its small size. Too bad it doesnt take bigger than 4ga wire....

58 of 68 found this helpful

Was this review helpful to you?

Madjimms

Portland, OR

Overall
Durability
Value
Features
Design
Usability
Holy moly!

August 15, 2014

Wowzers, I purchased an open box version and when it arrived I was stunned at the build quality. I researched this amp extensively before purchasing, clamp videos and forums, I STILL didn't expect such superb quality from an amplifier so inexpensive.

On par with $300 amplifiers such as Sundown,DC,Crescendo etc... etc... but at a fraction of the cost. Now obviously this isn't a $300 amplifier so it isn't going to put out much more than rated RMS, but considering it is CEA-2006 certified and has a few clamped/O-scoped videos on youtube doing approx rated power its pretty darn good.

Sucker is heavy compared to "mainstream" amps like Kicker,Pioneer,Sony. Bass remote is excellent quality as well, even the remote CORD is high quality.

One of the secondary reasons for picking this amplifier was the Bass boost EQ (30-80hz adjustable), no other amplifiers in this price range have it, Unless you want to spend $250+.

It was a tough decision between this and the Hifonics line of CEA-2006 models. I'm very content with my choice.

54 of 64 found this helpful

Was this review helpful to you?

Jeff

Hartsville, TN

Overall
Durability
Value
Features
Design
Usability
Best Cheap amp

November 10, 2014

This in my opinion is the best of the amps...It will definitely flex stuff if you have the right sub and box combo!!!

52 of 61 found this helpful

Was this review helpful to you?

Edward

Fishers, IN

Overall
Durability
Value
Features
Design
Usability
Sounds Great!!!

April 16, 2014

I had never heard of this amp and I have been building custom stereo systems for over 20 years and this amp sounds awesome for the money. If your looking to build a nice system and keep money in your pocket I suggest this brand of amp for your subs.

52 of 62 found this helpful

Was this review helpful to you?

Xavier

Bronx, NY

Overall
Durability
Value
Features
Design
Usability
I guess it works?

September 27, 2014

Bought this amp to power my Audiopipe BD3-12 and a week in, my sub is dead. The amp definitely powered it better than the OxygenAudio amp that was only doing 600w RMS @2ohms. Its wired with 4 guage Ground and P+. I went through the whole tuning with a 50hz wave and set my gains with a DMM at 41volts (which is from my math of 900wX2Ohms=1800, SqaureRoot of that being 42.xxx). I really hope that I didn't leave any space for clipping, but there is definitely a dead coil in my sub as I can feel some scraping when I push in the cone. I guess I dont know if I should be happy that the amp apparently has some power, or sad and confused that my sub is dead and it could possibly have been my fault...
Amp is very plain, sorry if im used to some sort of illumination from my previous O2 and Alpine amps, but I guess simplicity works. I would have loved an illuminated face on it. IJS.

52 of 63 found this helpful

Was this review helpful to you?

demon

coloradosprings, co

Overall
Durability
Value
Features
Design
Usability
sub killing inexpensive well built amplifier.

May 11, 2014

Let me start out by saying don't belive any of the reviews on any site that say this amp don't put out the RMS power that the company states. IT PUTS OUT THE RMS AND THEN SOME. I installed this amp in my wife's suv on her alpine typeS 12 inch sub that is rated at 1000w RMS and 3000w MAX @1ohm load believing all the reviews about this amp not pushing it's rms. Well now the wife has a new 12 inch sub because the amp was way to powerful for the 1 alpine 12, I had the gain at 80% and the bass boost around the same level, that was the hardest and best that sub had ever hit, we'll at least for the first 5hrs tge new amp was installed. No I didn't run the sub 5hrs straight but had only installed the amp 5hrs prior to driving 30mins to the store and on the drive back the alpine gave it's life to the audio gods. The sub was hitting great and all of a sudden it stopped and sounded as if the sub was stuck in the up position. Once I got home and inspected the sub to no avail it was blown and once I dissected I found the cooked and blackened which coil. So in conclusion if u want an amp that does what it says that it will do and ur on a budget or its like mine for the wife's car then this is the amp to get, but make sure when you buy the amp tgat you under power your sub or subs combined rms so u don't kill a 200$ sub in one day like I did. All is good though I had an mtx 8500 series 12 to put in the wife's ride @ a 2ohm load with an old kicker zx750.1 she is happy again. remember HAPPY WIFE HAPPY LIFE!!!!!!!

51 of 61 found this helpful

Was this review helpful to you?

jerm

orlando, Fl

Overall
Durability
Value
Features
Design
Usability
belva bb200

February 5, 2014

I have this amp pushing to American bass xd 10's! Plenty of power it doesn't even get hot.

52 of 63 found this helpful

Was this review helpful to you?

Timmmmm

Louisiana

Overall
Durability
Value
Features
Design
Usability
Great amp! Not as "clean" as more expensive amps...

October 25, 2013

This amp was a great surprise! Nice sound and great bass response. It's not as clean sounding as more expensive amps, but I have it on a kicker 12" with only 1/2 the gain and this thing pounds. Good for the price. Lots of tuning options also...

51 of 61 found this helpful

Was this review helpful to you?

Sneaky Neeks

St. Paul, MN

Overall
Durability
Value
Features
Design
Usability
Awwwww Yeahhhhh

March 12, 2014

Overall I am very happy with the Belva BB2000D.
The specifications are correct with the RMS. Looks great, Feels durable, stays cool, no distortion.
Great product for an even better price. Comparable to more well known brand names.

50 of 60 found this helpful

Was this review helpful to you?

chris

blue springs, mo

Overall
Durability
Value
Features
Design
Usability
belva bb2000d

September 27, 2013

This amp is bad ass I have it hooked to 2 sa12 at 1 ohm great doesn't get hot or shut off

50 of 60 found this helpful

Was this review helpful to you?

Chase

Minnesota

Overall
Durability
Value
Features
Design
Usability
Awsome Choice

April 15, 2014

I would definitely recommend this product, it puts out the power it says it does. I have 2 Hifonics Brz12sqd4's (square Brutus) hooked up and they are to the limit. You definitely won't be disapointed when buying this amp, for the price its a steal!

50 of 61 found this helpful

Was this review helpful to you?

curt

boise Id

Overall
Durability
Value
Features
Design
Usability
Beast

November 8, 2013

for the amount of money this amp costs, this is a beast of power.

49 of 59 found this helpful

Was this review helpful to you?

McGee

Michigan

Overall
Durability
Value
Features
Design
Usability
Good for the price

July 16, 2014

Bought this amp about 8 months ago. Have the powering 2 Rockford p2 12s and they had tons of power. About 3 months ago the amp shorted out and under warranty sonic sent me a brand new one free of charge. I since have replaced it with a Rockford p-1200 amp. It doesn't hit as loud as the Belva amp did, so if you want some hard hitting power for cheap Belva is the way to go!

47 of 58 found this helpful

Was this review helpful to you?

Christina

Atlanta, Georgia

Overall
Durability
Value
Features
Design
Usability
Surprised

November 30, 2014

For the amount of money this amp cost, I'm almost positive all the money you pay goes into the inside workings of the amp. Some of the parts that come with it are pretty cheap looking (bass knob in particular) and the amp isn't flashy but it most definitely does the job you're asking it to do. Looks very clean but bass knob looks cheap. Highly recommend, very surprised with the quality it produced.

44 of 53 found this helpful

Was this review helpful to you?

KZ

Benton Harbor, MI

Overall
Durability
Value
Features
Design
Usability
Belva BB 2000D

September 17, 2013

I have 2 MTX TS85 12" subwoofer on this amp and it hits man. Man it hits you know hell of a good amp

46 of 57 found this helpful

Was this review helpful to you?

Shane

Clyde NC

Overall
Durability
Value
Features
Design
Usability
Great Bang for your Bucks.

April 7, 2014

Purchased the Belva BB2000D just to try this new brand. And WOW most definitely stronger then I was thinking. Im using it to run a Massive Audio Kilo 12 running it at 2ohm. Im very impressed and looking to buy the Belva BB5000D to run a couple of Massive Audio Sumo 12s.

44 of 55 found this helpful

Was this review helpful to you?

Ant

Killeen Texas

Overall
Durability
Value
Features
Design
Usability
w

October 31, 2014

Had this amp about 2 weeks and for the price you can not beat it, it was worth a shot and wow!! did it exceed my expectations.I have it running at 1 ohm on a Soundqubed HDS312 and it beats hard and only have it 1/4 of the gain until sub breaks in and I am surprised at the power. Highly recommend and Sonic's shipping was amazing

41 of 50 found this helpful

Was this review helpful to you?

Ryan

Biloxi, MS

Overall
Durability
Value
Features
Design
Usability
Bad A** Amp

March 31, 2014

This amp is a power house, I have it paired with my power acoustik mofo 15 wired to 1 ohm and it is crazy shakes everything, got yelled at by the neighbors for shaking there house apart. If i play it too long its even too much for my mofo which is realistically a 1000-1200 watt sub. It makes the aluminum dust cap hot to the touch and starts to smell funny after 30 minutes or so of pounding full blast. So i would say it does a good job sounds great picks up lows really well, defiantly sounds great and puts out the 1200 watts it claims. Buy this amp lots and lots of pure power for the money.

43 of 54 found this helpful

Was this review helpful to you?

Daniel

new york, NY

Overall
Durability
Value
Features
Design
Usability
not bad not bad at all

August 29, 2013

I'm actually surprised how well this amp performs. the gain is only about 1/4 up and the bass knob. half way and man this thing pounds my single rockford fosgate p3 hard, my sub goes crazy and it sounds very clean but powerful pretty good amp for the money .

41 of 50 found this helpful

Was this review helpful to you?

Aldocha

San Benito,Texas

Overall
Durability
Value
Features
Design
Usability
Great item at a great price!

June 12, 2015

Highly recommended great power. Clean deep bass. No overheating under load. Planning on getting another for my other vehicle.

29 of 35 found this helpful

Was this review helpful to you?

Gimpster80

Tarboro, NC

Overall
Durability
Value
Features
Design
Usability
Great Amp for the Price

July 9, 2015

The BB2000D is a very clean looking small packaged amplifier with lots of power. I have not found anything in the price range that meets this level of quality/power for the price. The board has a very clean layout. The primary coil has multiple windings and good insulation. A compliant of good quality stiffening caps. Interestingly, the transistors leads are also insulated which I haven't seen on even higher end amps. I did not put it to a one ohm load but, regardless, stressed it in high afternoon heat and it barely got warm while my control amplifier did. Notably, the pictures do not show the nice deep accent of heat sinks down both sides of the amp. At 12.8 volts running at 2ohm I believe I saw around 675 watts, which should be right in-line with its given specs. I can say that the preamps will tolerate beyond 6v of input as I used 7.5 from the epicenter. Surprisingly, the amp does not lose too much power with lower tones like many cheaper amps. My only suggestion would be more durable end caps because those installers with less experience or lack of carefulness can easily break them. Highly suggest you use the included screws and washers to mount the unit. Belva obviously put great effort and cost into the internals and not a lot of flashy exterior nonsense or features you do not need. Overall, I give a great job to Belva and hope they are around for a while. I'm a big fan of the underdog and this one is a knock-out. I will be doing a review of the bb3000d soon.

25 of 31 found this helpful

Was this review helpful to you?

Jace

Devils Lake, ND

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Alright

July 25, 2015

I got this amp to replace my fried Rockford Fosgate Prime 1200. I have it wired to two Rockford Fosgate P3D412s at 1 ohm. The amp pushes them alright but not as good as the other one. Also the bass has dulled since I first bought it. I have already put the amp into protect mode due to overheating three times. Not a bad amp for the price though.

18 of 22 found this helpful

Was this review helpful to you?

Heff

gettysburg, SD

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
True to the specs and more

August 18, 2015

I bought this amp to power a 1000 watt american bass 15". I was sceptical at first with the inexpensive price. BUT i put it on an oscilloscope today and was very pleased with the performance. fully tuned it puts out a CLEAN 1392 watts just below clipping. so it's even a little underrated. definitely buy it if you need to save some change and have a good strong amp. also you can push it hard for 2 or 3 hours and it's just slightly warm to the touch. that's the longest i've run it so far. I'm sold on this brand great amp.

15 of 18 found this helpful

Was this review helpful to you?

ocdp

Dekalb

Overall
Durability
Value
Features
Design
Usability
Little Power Monster !

September 8, 2015

Bought this amp cos of the reviews and could not be happier. This amp cranks not a true 2000 watts more like 1300 but for a hundred bucks not bad at all. I crank mine on long drives and even with being hot and humid outside this amp never shuts down. Awesome amp and Sonic is the best place to buy car audio thanks again .

9 of 12 found this helpful

Was this review helpful to you?

Arthur

Compton, CA

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Best Bang

October 22, 2015

I got this amp based on the reviews from sonicelectronix.com and youtube. I have 1 Sa 12 Sundown D2 running at 1 ohm. Probably at little extra headroom for this sub. It sounds if I got 2 subs. I'm old school back when you paid a $1 to 2 dollars per watt. 10 cents per watt is a great deal.

5 of 6 found this helpful

Was this review helpful to you?

JaG

yuba city, CA

Overall
Durability
Value
Features
Design
Usability
Good but not great

February 22, 2016

First time purchasing this brand, Decided to give it a try for the price. The look is simple and doesn't have much to it. The back cover is really thin sheet metal that feels flimsy just touching it. The bass knob also isn't made from the best material. Sometimes the amp wont push my sub as it should even though the connections and settings are good. Not sure if problem with bass knob or the amp itself. Currently have it pushing my 10inch L7 Kicker solo-baric. Overall not a bad amp for the price.

0 of 0 found this helpful

Was this review helpful to you?

Freddy Krueger

Demotte , IN .

Overall
Durability
Value
Features
Design
Usability
Belva classD mono amp .

January 8, 2016

I don't know how accurate the specs are but I can tell you that this thing has more then enough juice to power a NVX 1200 watt rms sub with authority and accuracy . I am a firm believer in class D amps over A/B . You can now get class d amps that are as good as class A/B amps as far as signal to noise ratio . I replaced a class a/b with this class d and the difference in bass response is surprisingly abundant comparatively speaking . I strongly recommend this amp even if you are not on budget . A GREAT amp at a great price along with the outstanding service you get with Sonic Electronics !!! AAA . Oh yea the amp doesn't even get warm running at 1 ohm .

0 of 0 found this helpful

Was this review helpful to you?

Rico

Rockmart, GA

Overall
Durability
Value
Features
Design
Usability
Great Value

December 20, 2015

For the cost it has performed over my expectations, good clean power.

0 of 0 found this helpful

Was this review helpful to you?

SC

Cayman Islands

Overall
Durability
Value
Features
Design
Usability
Great bang for the buck

December 15, 2015

Replace my Power Acoustic 1800/2 with this amp and the difference is significant. This is a great amp at that price level. I have only had the amp for a couple weeks so I cannot yet speak to the durability.

0 of 0 found this helpful

Was this review helpful to you?

Andy Mac

Newbury, OH

Overall
Durability
Value
Features
Design
Usability
Insanity!

November 22, 2015

I bought this amp to replace am MB Quart Ref 800.1. I was a little nervous about how this amp would perform at first because of the fact that the input size does not accept anything larger than 4 Guage. I judged this amp wrong. Absolute monster! I cannot believe they are even selling this amp for less than $200. Belva fan for life now!

0 of 0 found this helpful

Was this review helpful to you?

Jdub

Marysville WA

Overall
Durability
Value
Features
Design
Usability
Another happy customer

November 5, 2015

I purchased this amp for running one 10" sub and I couldn't be happier with it. Not only did I get it at a great price I also received it in 2 days

1 of 2 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Belva 1.0 Farad Capacitor + Amp Kit

BB1D 1.0 Farad Capacitor + BAK42 Complete 4 Gauge Amplifier Wiring Kit

Your Price $39.99

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $89.99

Stinger SK4641 4 Gauge Wiring Kit

Get a high quality amp kit from Stinger to get the most from your new amp!

Your Price $62.95

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

Your Price $29.99

NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

Your Price $12.99

PAC LP7-2

L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On

Your Price $21.95

AudioControl LC2i

2 Channel Line Out Converter with AccuBASS & 5-year warranty*!

Your Price $79.99

Kicker KISLOC

2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter

Your Price $24.95

AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

Your Price $199.99

The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $159.99

AudioControl THE-EPICENTER-WHITE

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $139.99

NVX XBBR

Looking to fine tune the bass in your vehicle? Look no further

Your Price $99.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

NVX XIX25 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $14.99

4000 Series 2-Channel RCA Cable

17 ft. of 2-Channel 4000 Series RCA Interconnect Cable designed for the Audiophile

Your Price $16.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $99.99

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $449.00

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

320 Amp S Series Alternator for Custom and Racing Applications

Great for a Custom Project

Your Price $499.00

XS Power D925

12-Volt Deep Cycle AGM Power Cell with 2000 Max Amps

Your Price $169.99

Kinetik HC2000-BLU

Kinetik BLU Series 2000 Watt 12V High Current AGM Car Audio Power Cell

Your Price $223.99

SHURiKEN SK-BT100

12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts

Your Price $208.00

Rockford Fosgate RFC2D

Hybrid 2.0 Farad Digital Stiffening Capacitor

Your Price $139.99

Planet Audio PCBLK2.0

2.0 Farad Digital Capacitor with LED Display

Your Price $34.99

Belva BB2D

2.0 Farad Capacitor with Digital Red Display

Your Price $39.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

Your Price $299.99

SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

Your Price $149.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $16.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

4 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

Your Price $49.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $133.97

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $17.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $7.95

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.95

Items we think you might want
BB2000Dv2 main
Belva BB2000Dv2 (BB2000D v2)

• RMS: 540W x 1 @ 4 ohms, 900W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30 - 80 Hz
• Subsonic Filter From Off - 50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H

Your Price $119.99

BB3000Dv2 main
Belva BB3000Dv2 (BB3000D v2)

• RMS: 780W x 1 @ 4 ohms, 1260W x 1 @ 2 ohms, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H

Your Price $149.99

Browse 8 questions and 41 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Because nothing better can be had for the money, period.
Philip S on Feb 2, 2016
got this to power a 10 in a 1:2 ratio 4th... should be fun to give the sub 2 times the power
mathieu b on Oct 2, 2015
good price and have installed three of them in the past
Thomas J on Nov 2, 2015
good reviews
Arthur W on Sep 30, 2015
Is this amp one ohm stable?
A shopper on Sep 27, 2014
Best Answer: It has been going rock solid for me @ 1 ohm for 4 months now with no issues. It's driving the same pair of DVC Infinity subs I had a Memphis amp that rated a solid 1 ohm driving until one of the lead cables for it got messed up. Haven't bothered to look for a replacement cable yet, because this little amp is doing a spectacular job.

Hope that helps answer your question, as I can't recall the specs off the top of my head. I don't compete or anything crazy, but I'm assuming if you're looking at a budget amp, you don't either, so it should be fine.

For reference, understanding that gain is not = to volume, the gain is set at roughly a third from min, the rating coming from my deck would be around 3 o'clock-ish. I like my windshield in place though, so that's plenty for me.
Reply · Report · Adonijah R on Sep 27, 2014
· Add Answer · I Have This Question Too (0)
Would this amp do well with two Kicker 40CWRT102 wired to 2ohms?
Walker B on Jul 23, 2015
Best Answer: If you can get your hands on one of these amps, buy it. I have it pumping 2 - 12 inch pioneers and shakes our Eclipse with the amp turned down to about 75%. It is an excellent amp, but I would step up to the Belva 3000 if I had a medium to large size vehicle though. They are both great buys for the money. Go to You Tube and there is a video of a guy reviewing the amp too! Auto-Tek 2000.2 is great too!
Reply · Report · Richard R on Jul 23, 2015
· Add Answer · I Have This Question Too (0)
Would this amp work with 2 of these pioneer sub's?
A shopper on Nov 21, 2015
Belva BB2000D
Belva BB2000D
Pioneer TS-W3003D4
Pioneer TS-W3003D4
Best Answer: It looks like the Belva BB2000D is a good match for those subs. You would run the subs in parallel (running the voice coils in parallel will bring them down to 2 ohms since they are dual voice coil subs, and running both subs in parallel will bring the pair down to 1 ohm). The RMS rating of the amp at 1 ohm matches the RMS rating rating of the pair of subs, so that should be perfect! Good luck!
Reply · Report · Ronald B on Nov 21, 2015
· Add Answer · I Have This Question Too (0)
If I'm powering two Polk Audio 10" 4 ohm dvc subs (wired to 1 ohm) rated at 350 rms and 700 peak, should I get this amp or the Belva 3000?
Laremy D on Oct 29, 2015
Best Answer: Hello Laremy,

Chase is right. Alternatively, you CAN go with the BB3000D, but instead wire the subs in series/parallel to a 4ohm load, thereby getting ~780watts RMS from the amplifier. This is obviously closer to the 700w RMS that the pair of subs are able to handle. But to reiterate Chase's answer, NEITHER amp is recommended if you are adamant about wiring to 1ohm (which isn't your only option).
Reply · Report · Rick MStaff on Nov 2, 2015
· Add Answer · I Have This Question Too (0)
If i were to have 2 of these XTR124D wired at 1 ohm would this Belva 1200 RMS Amp power it sufficiently/properly?

http://www.sonicelectronix.com/item_65811_Belva-BB2000D.html

http://www.sonicelectronix.com/item_92819_Orion-XTR124D.html
Benjamin on Sep 2, 2015
Belva BB2000D
Belva BB2000D
Orion XTR124D
Orion XTR124D
Best Answer: Yes it would. I have two 15's ran off of mine and it works great.
Reply · Report · Cody A on Sep 3, 2015
· Add Answer · I Have This Question Too (0)
Will the belva 2000d push 3 jbl gt5 15s @ 1.3 ohm load without any issues??? I will be running all 1/0 ofc wires including big 3 up grade ofc. Stock 80 amp alt and stock battery mabe two runs of 1/0 ofc wire.
deep bass on Dec 22, 2015
Belva BB2000D
Belva BB2000D
JBL GT5-15
JBL GT5-15
Best Answer: Hi Zach,

We don't see your concern, but assuming the setup is installed properly - Yes. The rest of the information provided has very little play in the load to which you wish to run the setup, but it is great nonetheless.
Reply · Report · Rick MStaff on Dec 22, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

BB2000D

UPC

818060011481

Weight

8.00lbs

Internal SKU

bb2000d

Internal Product ID

65811

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Belva BB2000D