Expert Service 1-877-289-7664 [Hours]

Fall Blow Out Dot Sale

MTX Audio T9510-44

10" Dual 4 ohm Thunder 9500 Series Car Subwoofer

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Thunderous Bass Impact

The chill finally crawls from off of your spine. For a moment there are no words that can describe the gut-wrenching bass tones you just heard. The next moment, you can’t stop thinking of new ways to let the world know of your experience. You’ve just been exposed to an MTX Audio T9500 superwoofer, and you won’t soon forget the experience. These subwoofers are an industry standard for those looking to make bass tones once thought unheard stand out right in your face and make their presence known.

Boasting a rating of 750 watts of true RMS power handling, these subwoofers can really handle some power! A 195 oz. magnet allows the T9500 subwoofers for a full 4” of peak-to-peak excursion! This means with the Thunder 9500 you get a full 1” of Xmax. A 3.5” voice coil allows for some mean bass reproduction and can really help reproduce the gut-wrenching deep low bass that a lot of SPL competitors are after.

Authorized MTX Dealer
  • 10" Dual 4 Ohm Thunder9500 Subwoofer
  • Power Handling:
    • Peak: 1500 watts
    • RMS: 750 watts
  • Impedance: Dual 4 Ohm
  • Injection molded, carbon filled, polypropylene with aluminum deposition cone woofer
  • High roll NBR Surround to maximize excursion
  • Asymmetrical Linear Drive System (ALDS) with flat progressive spider
  • Stitched cone for added durability
  • Spider plateau venting cooling system
  • 3.5" Voice coil
  • 195oz. Magnet structure
  • Sensitivity: 88 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Thunder 9500
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1500 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
750 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
41.1 - 150 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
88 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
25.4 mm (1 inch)
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Silver
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Injection Molded Carbon Filled Polypropylene w/ Aluminum Deposition
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Nitrile Butadiene Rubber (NBR)
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.63 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
9-5/16"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-3/16"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0
kmoto

saugus, CA

Overall
Durability
Value
Features
Design
Usability
little home recker

May 31, 2011

I have two of these in a nissan titan with a Power Acoustik 5000 watt amp goin to them I've cracked my windshield twice now these are no joke if ur looking to hit hard save your cash and buy these great subs

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ross

Chicago, IL.

Overall
Durability
Value
Features
Design
Usability
The T9510 is simply unbelievable, especially for a 10"

January 9, 2011

For the past few years in one car I was running a 2009 10L7. After researching an upgrade for the 10L7, I decided on the T9510. Wow, what an upgrade!! I built a ported box per the MTX specs and I'm powering it with a JL e1800D 1000rms@2ohms. I wish I had a db meter because it feels equal to my friends system that has 3 JL12W0V2's. It absolutely blows the 10L7 out of the water and makes it look like a toy!! (Sort of like when I upgraded from the factory sub to the 10L7) This sub is just downright nasty! I frequently have people ask "what subs do you have" "do you have two 12's in there" "you got a 15 in that little car" they never believe me when I tell them I have one ten LOL. I will admit, it does take 5-10min to loosen up every day due to the massive surround and ultra stiff spider (similar to an old Rockford HX2 Power I had about 8 years ago). As you would expect, it is a little weak on the high end, if your one of those people that likes subs that can hit 120hz notes this may bother you. Value: If you only have room for 1 10", and you want nasal cavity clearing bass, this is it! Looks: Amazing. Durability: It's eating 1000rms in 0deg Chicago winters and laughs! Features: The screw type wire terminals are badass, love them.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Godly man

KEARNEY,MO

Overall
Durability
Value
Features
Design
Usability
great store

November 24, 2010

THIS sub is the best sub on the market now and forever will be this thing hammers and hammers the loudest i have ever heard by far! MTX is the TOP dog! In car audio!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Lorraine

King Cove, AK

Overall
Durability
Value
Features
Design
Usability
HOLY S&%$!!!!

July 11, 2008

This sub is absolutely ridiculous. I am pushing it with a TE1501D @ 2 ohms. The enclosure is the Sledgehammer design from MTX, and it is VIOLENT!!! I can only turn the Alpine HU to 25 before I start to get woozy... I have also hooked up a JL 10W7, and it never even comes close to this thing!! And buy from Sonic, you will definitely appreciate their customer service.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ted

Bellingham, WA

Overall
Durability
Value
Features
Design
Usability
More from a 10

July 11, 2008

Got a single 9500-44-10" in a ported enclosure. Pushing it with a Hifonics Brutus BX1000D, and DAM it hits hard!!!! Never thought I'd get this kind or sound/volume out of a single 10"!!!! Would recommend to any one. Very pleased.

0 of 0 found this helpful

Help our customers find the most helpful reviews

cheryl

Pittsburgh, PA

Overall
Durability
Value
Features
Design
Usability
Great Mtx 9510-44 Sub

September 1, 2006

About 3 months ago, i had purchased my first mtx 9500 series subwoofer, and i couldnt wait to get anthor one. This subwoofer is very big and loud, it weighs over 50 pounds and sounds like it looks BIG! I Recomend getting one if your serious about your bass!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Dual 10" Vented Subwoofer Enclosure

CARB Compliant, 3/4" MDF Dual Enclosure Lined with Premium Carpeted Finish

Your Price $88.95

10" Vented Subwoofer Enclosure

CARB Compliant, 3/4" MDF Vented Enclosure Lined with Premium Carpeted Finish

Your Price $62.95

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $119.99

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.95

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $99.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $13.99

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 MTX Audio T9510-44 Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 MTX Audio T9510-44 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 MTX Audio T9510-44 Subwoofers

Mono Amp

4 Channel Amp

4 MTX Audio T9510-44 Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

T9510-44

UPC

715442350902

Weight

56.00lbs

Internal SKU

t951044

Internal Product ID

6706

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: MTX Audio T9510-44