Expert Service 1-877-289-7664 [Hours]

Cyber Monday Sale

Precision Power PPI PH2.65S

6.5" 2-Way Phantom Series Component Car Audio Speaker System

In Stock

List price $169.95

You Save: $109.96 (64.70%)


with warranty A Pair

+ FREE Shipping in US 48

Order within 47 hrs 54 mins to ship 11/30

Arrives by Wednesday, Dec. 2 to zip 20147

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

In Stock

Arrives by Wed, Dec. 2

Item Added to Cart

Precision Power PPI PH2.65S

6.5" 2-Way Phantom Series Component Car Audio Speaker System


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!


Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.


NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!



Don't see the accessory you're looking for?
View all available accessories for the Precision Power PPI PH2.65S.

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product


Get 25% off Sound Dampening Speaker Kit with Purchase!

For a limited time, get 25% off of the NVX SDSK2 Speaker Kit with a qualifying pair of speakers! Sound dampening will eliminate rattles, insulate against heat, and also improve the sound and output of your speakers!




Precision Power PPI PH2.65S



25% OFF



Special Price $8.24 ($10.99 if purchased separately)


• Eliminates Road Noise
• Quiets Vibrations
• Stops Annoying Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Peel and Stick Installation
• Two 10" x 10" Pieces

(Offer 1 of 1)

Combined Total Price


You Save $2.75

Will fit most 6x9" and 5x7"/6x8" locations,
with appropriate speaker adapter. Click "Related Items" Tab

Precision Power Store Inverted Tweeter

Inverted Dome Tweeters

Precision Power PPI PH2.65S tweeters incorporate an inverted dimpled Aluminum dome diaphragm with phase plug, to provide crisp, smooth highs . They are driven by a high strength neodymium magnet. These components come together perfectly to deliver a proper full-range sound that will compliment the staging of other drivers within an audio system. As as a stand-alone system, they have a frequency response of 15 kHz - 20 kHz, a 93 dB efficiency and 80w Peak Power Handling.

Shallow with Deep Sound

Shallow with Deep Sound

Even with only 1" mounting depth, the 6.5" woofer is capable of reproducing the lowest of lows and snappiest kick bass with very little effort! An inverted neodymium motor structure allows a shallow and compact profile frame. The cone and dust cap is 1-piece IMPP, its molding recesses into the back side to receive the voice coil structure. This direct connection of cone to voice coil yields the snappy reaction of a flat piston driver, virtually eliminating cone-radiated distortion.

General Features:

  • 6-1/2" Phantom Series 2-Way Component Speakers
  • Power Handling:
    • Peak: 140 watts per set / 70 watts each side
    • RMS: 80 watts per set / 40 watts each side
  • Low resonance Polycarbonate frame
  • Polypropylene dome cone
  • 3/4" Aluminum inverted dome tweeter
  • +/- 3dB Tweeter attenuation switch with PTC tweeter protection
  • Passive 12dB crossover
  • High strength Neodymium magnet structure
  • Shallow mount and high efficient components
  • Frequency Response: 50-20,000 Hz
  • 1" Mounting depth
  • Sensitivity: 86dB
  • Woofer mounting depth 1"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

Speaker Specifications

This is the manufacturer product line of speakers.
Phantom (Precision Power)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Inverted Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
140 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
80 watts
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
86 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
50 - 20000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Number of Speakers
This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

Please refer to the product image and description for further details about the speaker.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating


Pensauken nj

Great value!

November 19, 2013

Great sound, easy installation fast shipping good product the low mount is excellent for my nissan frontier.

41 of 82 found this helpful

Was this review helpful to you?


Rosamond ca

Cant beat the price!

September 21, 2015

The highs and mids are really great for 70 bucks can't complain!

2 of 5 found this helpful

Was this review helpful to you?


Maricopa, AZ

Not bad. Perfect if you need very thin speakers

December 27, 2013

I purchased these for the rear speakers in my 2013 Toyota Sienna because everything I had researched said nothing will fit back there due to the shallow mounting depth. These speakers fit with room to spare. They sound good but not great in my opinion. However, if you need an extremely shallow depth then these are the way to go. I ended up purchasing a par of kicker CS 6.5 coaxials and like the sound better though. They aren't as thin but they still worked for my application.

40 of 86 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $16.99

NVX XTGSP2 Tone Generator and Speaker Polarity Tester

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Belva Five Piece Installer's Panel Removal Tool Kit

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $11.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $29.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $10.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

NVX Sound Dampening Rubber Roller

Install your Sound Dampening with ease using this heavy duty rubber roller!

Your Price $6.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $5.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.99

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

Speaker Baffles for your Speakers

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $9.99

XTC 6-1/2" Round Large Frame, Shallow Foam Speaker Baffles

Creates a tight seal behind speaker for enhanced audio quality.

Your Price $12.99

Browse 1 question and 4 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Good price and seeming good quality components.
Patrick M on Nov 26, 2015
My car needs shallow depth speakers
salvatore c on Apr 26, 2015
I like the speakers,,, the way they sound
Enrique C on Sep 21, 2015
its a good choice for shallow speakers
Robert H on Dec 21, 2014

Product Summary


Model Number






Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Precision Power PPI PH2.65S