150W 10" HED3 Series Single 4 Ohm Subwoofer
• 800W Peak
• 150W RMS
• Single 4 ohm Voice Coil
• Composite Polypropylene Cone
• Butyl Rubber Surround
• Rolled Aluminum Former
• XFV Cross-Flow Window Venting for Massive Heat Dissipation
• 800W Peak
• 150W RMS
• Single 4 ohm Voice Coil
• Composite Polypropylene Cone
• Butyl Rubber Surround
• Rolled Aluminum Former
• XFV Cross-Flow Window Venting for Massive Heat Dissipation
|
(newest, current model)
|
|
(previous model, replaced by Cerwin-Vega HED3104)
|
Best selling similar products
• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.23"
• Sensitivity: 83 dB
$249.99
List price $299.99
• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB
(29)
$519.99
List price $519.99
• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB
(68)
$139.99
List price $139.99
• Peak Power: 800 watts
• RMS Power: 200 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• Treated Foam Surround
• Mount depth: 3.54"
• Sensitivity: 83.1 dB
(4)
$99.99
List price $119.99
• Peak Power: 700 watts
• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Paper Fiber with Mica Coating Cone
• Rubber Surround
• Mount depth: 5.32"
• Sensitivity: 82.2488 dB
$209.00
List price $229.00
• RMS Power: 700 watts
• Impedance: Single 4 ohm
• Paper Fiber with Mica Coating Cone
• Rubber Surround
• Mount depth: 5.32"
• Sensitivity: 83.7199 dB
$209.00
List price $229.00
• Peak Power: 300 watts
• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 4-11/16"
• Sensitivity: 84.9 dB
(15)
$79.95
List price $59.95
• Peak Power: 1300 watts
• RMS Power: 350 watts
• Impedance: Single 4 ohm
• IMPP - Aramid Fiber and Carbon Fiber Cone
• Rubber Surround
• Mount depth: 3-1/4"
• Sensitivity: 76 dB
$153.00
List price $260.00
NVX VCW104 Version 3 (VCW104v3)
• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)
(71)
$169.99
List price $203.99
• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 5.625"
• Sensitivity: 83.5 dB
(1)
$189.95
List price $159.95
Manufacturer:
Model Number:
HED3104
Weight:
10.00lbs
Internal SKU:
hed3104
Internal Product ID:
68566
| 5 star |
|
50% |
| 4 star |
|
50% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
5 stars once you break them in!
OK, in my earlier review I had just gotten these and hadn't broken them in yet. It's been a year now and WHAT A DIFFERENCE!! Not only do they love the ported box, but once they were broken in I put one in a 1.0 cu. ft. sealed box and it played ridiculously low!!! Enclosure is everything for these, they make plenty of low bass and are going strong with no problems. I previously had Soundstream Picassos, Powerbass S10s, and Kicker C10s on the same amp - the Vega HEDs play lower than all of those and have outlasted them all! For the price...unbeatable!
9 found this helpful
Good for the price...
I got a pair of these and put them in parallel (2-ohm load) on the rear channel of a Powerbass ASA1100.5x amp pushing 500W RMS. They look sharp installed and fit standard openings easily, so no problems there. The pushbutton wire terminals are standard issue, nothing new there. It took about a day of breaking them in before they started playing really well, but once they loosened up they were hitting the lows just fine. I am not a "block rocker" at all, but I do like to be able to turn the music up and hear clean highs and feel strong lows. I can roll down the windows and feel like a basshead, but I'm selfish enough to want all of the bass to myself and this setup delivers. The enclosure is everything for these subs, I wasn't too fond of them in a sealed enclosure (they are in a sedan though). They work best in a ported box built to the specs in the manual but my pre-fab Atrend Bbox gets close enough for now. Be sure to use the subsonic filter on your amp, the manual makes the point of setting the filter at least 30 Hz or above. Can't really speak to durability yet, but I don't see any signs of stress. I am well above the recommended 150W RMS per woofer, but I will never feed them 800W max either so they should last a good while. They seem to play a little bit lower than Kicker Comps but not as responsive to transients as a comparison. Good entry-level sub, but don't confuse these for Strokers or Vega series.
7 found this helpful
Single 10" Sealed Subwoofer Enclosure
Durable 3/4" Medium Density Fiberboard (MDF) Construction
(121)
$59.99
List price $99.99
Single 10" Sealed Subwoofer Enclosure
Durable 3/4" Medium Density Fiberboard (MDF) Construction
(16)
$59.99
List price $89.99
NVX 20 ft. of True Spec 8 Gauge Speaker Wire
Flexible multi-strand cable bends and twists to meet your installation needs.
(45)
$49.99
List price $64.99
Belva 23 ft. of 12 Gauge Speaker Wire
Ultra-flexible PVC blended jacket for easy installation.
(43)
$6.99
List price $14.99
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!
(9)
$155.99
List price $339.00
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
(47)
$156.95
List price $187.44
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(126)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
