Expert Service 1-877-289-7664 [Hours]

NVX XSP6KIT

6.5" 2-Way X-Series Component Car Audio Speaker System

Available. Ships at Later Date
|

List price $719.97

$399.99

with warranty

You Save: $319.98 (44.44%)

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

Available

Ships at Later Date

Bundled Savings with this Product

Free Sound Damping w/ Select Speakers

For a limited time, get FREE NVX SDSK2 Speaker Sound Damping Kit with a qualifying pair of speakers! Sound damping eliminates rattles, insulates against heat, and also improves the sound and output of your speakers!

14.99

68826

158

NVX XSP6KIT

$399.99

+

100% OFF

NVX SDSK2

$14.99

Special Price $0 ($14.99 if purchased separately)

NVX SDSK2

• Eliminates Road Noise
• Quiets Vibrations
• Stops Annoying Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Peel and Stick Installation
• Two 10" x 10" Pieces

FREE Sound Dampening!

For a limited time, get a free NVX SDVK4 Versa Kit with a qualifying pair of speakers! Sound dampening will eliminate rattles, insulate against heat, and also improve the sound and output of your speakers!

19.99

68826

159

NVX XSP6KIT

$399.99

+

100% OFF

NVX SDVK4

$19.99

Special Price $0 ($19.99 if purchased separately)

NVX SDVK4

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• One 18" x 32" Piece

(Offer 1 of 2)

Combined Total Price

$399.99

You Save $14.99

NVX Store

General Features:

  • 6-1/2" X-Series Component System
  • Power Handling:
    • Peak: 460 watts per pair / 230 watts each
    • RMS: 230 watts per pair / 115 watts each
  • Finely Milled Pulp and Egyptian Papyrus Fiber cone material is stiff yet lightweight
  • 29mm Silk Dome tweeter construction offers crisply detailed highs with warm characteristic
  • Dimpled tweeter dome improves the dispersion pattern for improved response
  • Low Damping Rubber speaker surround maintains linear movement better than any other material
  • Included crossovers are engineered to beautifully complement the natural roll-off of the tweeter and midwoofer
  • Copper Shorting Sleeve placed in the air gap between the pole piece and the voice coil former reduces inductance
  • Shorting Sleeve improves power delivery to the voice coil, decreases inductive distortion and improves cone linearity
  • Improved clarity and fidelity at higher notes reduced strain on the surround
  • Ring Radiator design prevents the surround from decoupling at higher frequencies
  • Low Turbulence Cast Aluminum Basket improves airflow to reduce compression of the motor structure
  • Relatively soft spider to reduce unwanted mechanical stiffness
  • Speaker housing designed to improve cone control and reduce back-wave interference
  • Robust Tweeter Chamber helps lower the resonant frequency, greatly improving imaging
  • 3-dimensional cast design dramatically increases the strength and rigidity of the basket
  • Designed to perform optimally in a real car environment
  • 4 ohms impedance
  • Frequency response: 45-22,000 Hz
  • Top-mount depth: 2-15/16"
  • Sensitivity: 90dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

Speaker Specifications

Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
1-1/8"
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Silk
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Milled Pulp and Egyptian Papyrus
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
230 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
115 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
45 - 22000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-15/16"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
5-3/4" x 5-3/4" 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
On Sale

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.5
Value
5.0
Features
4.5
Design
4.5
Usability
4.5

Bilbo99

Redding, Ca

Overall
Durability
Value
Features
Design
Usability

I have heard....

September 19, 2013

I have listened to these in a Scion FC and they sounded awesome. Exceptional midbass to clear and airy highs. I only had 5 minutes with them and I could tell that at high volume there would be very little ear fatigue. I have read and heard from many trusted voices in the car audio community that this set is very very similar to ARC RADIO's Black Series components. It's a known fact that NVX makes ABC's high end components but I have not seen or heard them side by side. If this is 90% true, then its an outrageous steal.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nick

Sherman Oaks, CA

Overall
Durability
Value
Features
Design
Usability

Best sound I have heard.

September 16, 2013

I heard these at Sonic Electronix headquarters in a Dodge Ram. They are some of the best speakers I have ever heard and the tuning on the truck was great too. The accuracy and sound from the tweeters really is great and you get full sound from them since they are 29mm. The mid-woofers were super clean and they had them running active off the amp and a sound processor so I cannot comment on the crossovers in the truck, but they do have them in their store sound board. As soon as I save enough, I will be getting a set. I recommend you listen to them if you are in the area.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $49.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $69.95

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $46.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Speaker Baffles for your Speakers

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $9.99

XTC 6-1/2" Round Large Frame, Shallow Foam Speaker Baffles

Creates a tight seal behind speaker for enhanced audio quality.

Your Price $12.99

Items we think you might want

XGR665 thumbnail

NVX XGR665

• Fits NVX N, V and X Series 6" and 6-1/2" Speakers

Your Price $12.99

660GTi thumbnail

JBL 660GTi

• Peak Power: 600W
• RMS Power: 150W
• 2-1/4" High Quality Dome Tweeters
• Mounting Depth: 3-1/16"
• Kevlar Cone
• 4 Ohms Impedance
• Sensitivity: 92dB

Your Price $719.99

T3652-S thumbnail

Rockford Fosgate T3652-S

• Peak Power: 250W
• RMS Power: 125W
• 1" Liquid Crystal Polymer Dome Tweeter
• Mounting Depth: 2-5/8"
• Liquid Crystal Polymer Woven Cone
• 4 Ohms Impedance
• Sensitivity: 87.5dB

Your Price $699.95

Product Summary

Manufacturer

Model Number

XSP6KIT

Weight

14.30lbs

Internal SKU

xsp6kit

Internal Product ID

68826

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NVX XSP6KIT

  • NVX X-Series Audiophile Car Speakers
  • NVX X-Series Audiophile Car Speakers
  • Sonic Electronix: The X Factor when Shopping Electronics