Expert Service 1-877-289-7664 [Hours]

JL Audio 10W3v3-2

500W 10" W3v3 Series Single 2 ohm Subwoofer

In Stock
|

List price $279.95

You Save: $40.00 (14.29%)

$239.95

with warranty

+ FREE Shipping in US 48

Order within 17 hrs 21 mins to ship 3/3

Arrives by Friday, Mar. 6 to zip 07095

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Fri, Mar. 6

Get FAST answers from customers ASK a Question See questions answers

Clean and Efficient W3v3 Series JL Audio Woofers

The JL Audio 10W3v3-2 is rated at 500W RMS with a Single 2 ohm voice coil. This woofer is for those who are serious about their bass reproduction. The woofer will provide some of the most precise bass you will ever hear and it will do so with the up most efficiency. Not only does this woofer sound great but it is extremely pleasing to the eye and it will add a touch of elegance to any vehicle. Designed for either a ported enclosure for improved elongated lower frequencies or a sealed enclosure for an increase is response rate. The 10W3v3-2 will take your audio system to the next level without costing you a bundle

JL Audio is all about performance and quality. They manufacture products to meet extremely high standards and anything less than those standards is not good enough to carry the JL Audio name. The W3v3 subwoofer is one of the cleanest, most efficient, and best sounding subwoofers in its class. This series is available in a 6.5, 8, 10, 12, and 13.5 size woofer that can pretty much fit any vehicle size. The W3v3 features a DM Optimized Motor System that provides constant and strong linear excursion that result in reduced distortion and higher bass reproduction. These woofers also feature Elevated Frame Cooling technology that delivers cool air directly to the voice coil of the woofer. This increases power handling and sound quality. The W3v3 series subwoofers offer many more patented technologies that truly make this series stand out above the rest. If you are struggling on a decision, the decision if simple JL Audio, it will never disappoint.


 

Product Features:

  • 10" Single 2 Ohm W3v3 Series Subwoofer
  • Not sure which model you're looking for?
    • Click here to compare!
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 500 watts
    • Recommended Power Range: 100-500 watts
  • Impedance: Single 2 Ohm
  • Mineral-filled polypropylene cone woofer
  • Nitrile-butadiene rubber surround
  • DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output
  • Vented reinforcement collar improves rigidity and stability of the cone, spider, and voice coil
  • Spider and lead wire assembly
  • Elevated frame cooling enhances power and sound quality
  • Floating Cone Attach Method allow the cone and surround to be aligned independently
  • Sensitivity: 86 dB
  • 1-year SonicElectronix.com warranty
JL Audio 10W3v32 Recommended Power Range

JL Model Comparison

Model Peak power RMS Power Cone Material Surround Material Sensitivity Frequency Response Xmax Terminals Made In America
W7 Series 1000-3000 Watts 500-1500 Watts Polypropylene Foam Overroll 83-86.3 dB 15-250 Hz 19-32 mm Push Terminals
W6 Series 1200 Watts 600 Watts Polypropylene Nitrile-butylene Rubber 84-85.4 dB 20-250 Hz 19 mm Push Terminals
W3 Series 500-1200 Watts 250-600 Watts Polypropylene Rubber 80-88 dB 20-250 Hz 9-15.5 mm Push Terminals
W1 Series 600 Watts 300 Watts Polypropylene Rubber 83.9 dB Not Specified 11 mm Push Terminals
W0 Series 600 Watts 300 Watts Polypropylene Rubber 85.64 dB 22-250 Hz 11-11.4 mm Push Terminals
WX Series 400-500 Watts 200 Watts Polypropylene Foam 86-87 dB 22-250 Hz 9.5-9.8 mm Spade Terminals

Product History:

JL Audio 10W3v3-2 thumbnail
(newest, current model)
JL Audio 10W3v2d2 thumbnail
(previous model, replaced by JL Audio 10W3v3-2)

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
W3v3 (JL Audio)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1000 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
500 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
25 - 250 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85.37 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
14 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Mineral-Filled Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Nitrile Butadiene Rubber (NBR)
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.625 cubic feet
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.625 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5.93"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9.0625"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
80%
4 Star
20%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.7
Value
4.7
Features
4.7
Design
4.8
Usability
4.9
Anthony

Stockton, CA

Overall
Durability
Value
Features
Design
Usability
Good sub

June 18, 2011

I'm running my W3 with a Kenwood 1000w mono channel, and it's more than enough. I have my amp set all the way up, and my gain is at 3 db and it's the perfect amount of bass. It can get very loud and I haven't heard any distortion.

First day I had it, I showed my girlfriend at her house, and when I got it as loud as I could, he neighbors came out angry. I also showed another friend and he commented that his 2 Fosgate 12p2s sound like garbage compared to this. For the price, this is te best 10" you will find by far.

8 of 13 found this helpful

Was this review helpful to you?

J

St. Louis, MO

Overall
Durability
Value
Features
Design
Usability
Great Sub for Small Encloures

June 17, 2013

I built a custom fiberglass enclosure (0.6 ft3) to fit into the inner quarter-panel area of my A4's trunk, the space is tight and the rear of the enclosure tappers off making larger subs a no-go. The relatively small magnet of this sub and basket cut-out diameter make it ideal for a small enclosure like mine. Sound was a little boomy at first, but after adding some additional poly-fill, this sub sounds great.

6 of 10 found this helpful

Was this review helpful to you?

Big Pappa

Midland TX

Overall
Durability
Value
Features
Design
Usability
Simply Amazing

September 4, 2012

It does everything i could ever dream of for a 10"

8 of 14 found this helpful

Was this review helpful to you?

Tony

Omaha, NE

Overall
Durability
Value
Features
Design
Usability
Good quality sub

August 8, 2012

I really like this sub, and would recommend it. I have one installed in my Audi A4, powered by a kicker ix amp and using a Pioneer aftermarket head unit. I initially tried installing it using the factory head unit, using a line out converter, and was not happy so "had" to upgrade. Having the extra subwoofer adjustments were very helpful in getting it to sound the way I wanted. I custom made the box it is in using the specifications in the instructions. For my novice ears it handles the lows very well. It is capable of producing bass you can feel even with the head unit volume set very low. Although I believe the manual says it can handle frequencies up to 250 Hertz, it seems to perform best for me with the crossover set at about 100 Hertz, anything higher then that seems to get distorted.

7 of 12 found this helpful

Was this review helpful to you?

nick

saugus, CA

Overall
Durability
Value
Features
Design
Usability
JL Audio subwoofers

October 26, 2009

these subs absolutely rock. great bang for your buck. would definitely recommend these

5 of 8 found this helpful

Was this review helpful to you?

Sparky

Smiths, Al

Overall
Durability
Value
Features
Design
Usability
Best price out there

August 31, 2011

I asked my Buddy for the best deals on a JL sub and he told me about Sonic Electronix.com. So i checked them out, because they had the best price on the 10W3v3-2, i bought it. I was pleased with the fast delivery of my sub and with my sub. Thank you!

8 of 15 found this helpful

Was this review helpful to you?

spy

bragg, nc

Overall
Durability
Value
Features
Design
Usability
jl w3

October 14, 2010

I really enjoy this sub. It has a crisp clear sound and hits quite hard. I listen to a lot of rock and the JL 10W3 has no trouble keeping up with the double bass. I would buy the JL w3 again and highly recommend it to anyone looking for a nice upgrade to their car audio system.

7 of 13 found this helpful

Was this review helpful to you?

damian

Washington DC

Overall
Durability
Value
Features
Design
Usability
Best speaker ever!!! while it was working!

August 8, 2010

This speaker is great, but after 6 months it busted.

4 of 7 found this helpful

Was this review helpful to you?

THUMPER

Chattanooga,tn

Overall
Durability
Value
Features
Design
Usability
broke the roof support in my uptak

August 13, 2009

i had 4 of the 10W3v-2 old school. they were rated at 300 w ea. i had 2 mtx 500d's pushing them at 2 ohms. the amps were rated at 775 w. everyone who heard me thought i had 15's in my vehicle. db drag read 155.3 dbs on the meter and that was Six years ago.

2 of 3 found this helpful

Was this review helpful to you?

Devkemp

Fargo, ND

Overall
Durability
Value
Features
Design
Usability
Awesome

March 21, 2014

This sub is definitely worth the money. Right now I'm running it with a JX250/1, and I've got the amp cranked all the way up, and it sounds great. Just a tip thought, in the instructions it says not to run the subwoofer through a passive crossover, which I read, and I knew that the pre-outs for the subwoofer from the head unit have a passive crossover setting. I plugged the subwoofer into the pre-outs for the front speakers instead, and now it sounds much better.

1 of 2 found this helpful

Was this review helpful to you?

Pokerjrock

Louisville, KY

Overall
Durability
Value
Features
Design
Usability
Awesome Speakers

June 19, 2012

These are some high quality speakers. I installed them into my 2010 Camaro SS and was blown away by their performance. JL is the best.

5 of 10 found this helpful

Was this review helpful to you?

Erik

Durham, NC

Overall
Durability
Value
Features
Design
Usability
jl w3v3-2

December 5, 2010

I like it sounds good and can hold all the power that it says it can while sounding good. Will buy more like this. Hits hard and best for the $$. Sonic Electonixs shipped fast as crap and was at my door in just a few days, not months like others, Ex.( h*-** ***** ) ...

4 of 8 found this helpful

Was this review helpful to you?

Nick

Springfield, MO

Overall
Durability
Value
Features
Design
Usability
Freakin Amazing!

December 1, 2010

This sub is simply amazing. This thing packs a punch. I have it set up with a Rockford Fosgate P300-1 and it is the perfect match. It has great sound quality and is very clean. I set this up in my Tiburon and it has the perfect volume. If your looking for a great sub for a small car, this is the one for you.

4 of 8 found this helpful

Was this review helpful to you?

Jonathan

NC

Overall
Durability
Value
Features
Design
Usability
Great Sub

June 17, 2010

I have it hooked up to a Eclipse XA1000 mono amp with a Rockford 1FD cap and a Eclipse CD3000 head unit. The amp runs at about 400 RMS and 640 MAX I have the low pass filter set to 80Hz, input voltage is 5v and bass boost it at 6db. All I ever get is compliments when people get in my truck and take a listen. The bass is nice and tight and if the singer has a real low voice it comes through great. Make sure you have the volume for your box right if you get a leak or have too much it will sound very muddy. People are really surprised that my nice 10" sounds better and hits harder than there cheap 12's. It costs a good bit but you get what you pay for and JL is one of the few companies left in the industry that have not cheapened the quality of there products. Other things about the setup is that it is in a closed box inside a regular cab truck firing towards the back and all the wire is Rockford Fosgate.

4 of 8 found this helpful

Was this review helpful to you?

nole3535

Arlington, TN

Overall
Durability
Value
Features
Design
Usability
Great

May 4, 2010

Replaced 2 10" M-Class Memphis Audio with these and the difference in sound is unreal. Wish I would have never wasted my money on Memphis audio.

4 of 8 found this helpful

Was this review helpful to you?

zig

Sacramento, calfornia

Overall
Durability
Value
Features
Design
Usability
JLs

April 22, 2010

I had this JL for about 6 months did me right nothing beats JL audio best deep sounds ull get I have one of these and it smacks louder then two kickers. Def worth the money

3 of 6 found this helpful

Was this review helpful to you?

scubydeath

Telford, PA

Overall
Durability
Value
Features
Design
Usability
great sub

April 20, 2010

i have had this subwoofer in my car for six months now, and i could not be happier with it. i built a custom fiberglass box for it, and stuck to the exact volume specified by JL, which is the way to go for any build. It sounds beautiful, and will put a lot of other subwoofers to shame. keep in mind though, this is a 2 ohm sub, and needs an amplifier that can handle 2 ohms. my first amp for this driver was a piece, and it would constantly go into protect mode when this sub started to rock n roll. Absolutely worth the money.
JL kicks Butt!!

3 of 6 found this helpful

Was this review helpful to you?

stallion

new orleans LA

Overall
Durability
Value
Features
Design
Usability
slammin

July 24, 2009

these subs are sweet! i have them in a really small box under my 2008 chevy silverado stallion crew cab and they SLAM! better then my previous 12' kicker cvr's and these are tens in a much smaller box. the bass is tight very clean. it'll shake your mirrors windows other ppls windows.. buy them

1 of 2 found this helpful

Was this review helpful to you?

Mend

NY

Overall
Durability
Value
Features
Design
Usability
Very happy

June 24, 2009

I'm a nut and reviewed so many subs based on my needs and this was one of the very few the met my criteria (medium weight, solid SQ performance, could get some SPL as well, high quality)

I've had this installed in the proper sealed enclosure mated to a Rockford Fosgate Prime R500.1 amp and I'm very impressed. Its visually stunning and incredibly clean in a equally nice black carpeted box, (that I got from here I might add)

It has fantastic reproduction of low end bass. I'm feeding it a little over RMS but I have my gain set to my headunit preout voltage and for optimal listen I have the sub set to -3 (range of -15 to +15) on my head unit (Kenwood X991 - epic headunit btw).

This things hits like a high end 12" for sure. About 5 years ago I had 2 Rockford Punch ( P1 12's, 200ish rms each) in a sealed box and this 10" in a .625" cubic box simply destroys it.

I've thrown techno, rock and rap at it and it loves it all.

If I turn my head unit up to about 75% of full volume and turn the sub past -3 into +3 the pounding starts to hit you nicely. Since I've only had this sub for 1 day and about 2 listening hours I haven't cranked it but the few times I tested out +6 and +9 if felt like a punch to the back of my head and chest, mirrors shaking, loud and accurate to the tones.

Please keep in mind there are several factors you need to realize to my review.

- I have a large hatchback (RSX) so the dynamics of the hatch are in my favor when dealing with a sub.
- I have this running with a 4 gauge Rockford Amp kit. This is as good as it gets folks. High strand, true 4 gauge wires giving the power the amp needs, ground wires are 4 gauge as well, this keep voltage in the proper ranges.
- 3/4" MDF box, go with nothing less for any kind of sub, low or high end the box is the key to a subs sound.
- I have a high end headunit that allows me to control all aspects of the speakers but technologies that help it sound better.

Keep all this in mind when buying a sub.

As of right now, I can't imagine getting anything other than what I've got right now. I love this little thing, its fantastic in all the aspects I wanted it to be. Fantastic SQ with the ability to boom if you want. High quality, made in the USA!, cant go wrong here, high recommended. Beware these new V3 series are single coils, limits your options but makes it easier to hook up for noobs.

1 of 2 found this helpful

Was this review helpful to you?

Rav4 2 dorrs.

Panama

Overall
Durability
Value
Features
Design
Usability
10w3v3-2

February 17, 2009

Excellent product Im moving it with a class D JL A1400 mono. Best sound Q I ever heard and low frequency bass with no distortion at all.

This sounds as loud ad a 12 inch subwoofer. I highly recommend this product to every one.

One's you hear this sub, you will love it.

1 of 2 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

10" Subwoofer Angled Truck or Hatchback Sealed Enclosure

CARB Compliant, 3/4" MDF Sealed Enclosure Lined with Premium Carpeted Finish

Your Price $42.95

10" Vented Subwoofer Enclosure

CARB Compliant, 3/4" MDF Vented Enclosure Lined with Premium Carpeted Finish

Your Price $62.95

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $9.99

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $119.99

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $164.95

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $99.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 JL Audio 10W3v3-2 Subwoofer

Mono Amp

2 JL Audio 10W3v3-2 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

3 JL Audio 10W3v3-2 Subwoofers

4 Channel Amp

4 JL Audio 10W3v3-2 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
im looking to get 2 of these for my 350z and i wanted to get 2 monoblock amps, but im tight in space wich amp would you recomend for both subs wired together?
alcario v on Sep 27, 2014
Best Answer: Hello Alcario,

You slightly contradict yourself in your inquiry, but we think we understand. Mainly between you saying you seek Two Monoblocks, but then end with suggesting you want them 'wired together'. If you have Separate Amps, there is NO 'wiring together'. In any event, we suggest going with Two JBL GTO-501EZ which have a fairly small footprint, providing exactly 500w RMS @ 2ohms . Alternatively, you can also go with two NVX MVPA1, which is Dramatically smaller and will obviously provide less power because of that, being 300w RMS @ 2ohms. Either one will work great, and it comes down to which will work best for your application.

JBL GTO-501EZ
http://www.sonicelectronix.com/item_43360_JBL-GTO-501EZ.html

NVX MVPA1
http://www.sonicelectronix.com/item_71776_NVX-MVPA1.html
Reply · Report · Customer SStaff on Sep 28, 2014
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

10W3v3-2

UPC

699440921503

Weight

15.00lbs

Internal SKU

10w3v32

Internal Product ID

7252

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JL Audio 10W3v3-2

  • JL Audio W3 Car Subwoofer Review
  • Subwoofer Size Buying Guide