Expert Service 1-661-257-9993 [Hours]

Power Acoustik BAMF4500/5D

4500W BAMF Series Class D 5-Channel Amplifie

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

bamf52500 thumbnail

Power Acoustik BAMF5-2500

OUR PRICE: $152.99

View item

Item Added to Cart

Power Acoustik BAMF4500/5D

4500W BAMF Series Class D 5-Channel Amplifie

$184.97

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$22.99
Add Warranty
3 years of protection

NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$39.99

Add
NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$39.99

Add
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$69.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Power Acoustik BAMF4500/5D.

Get FAST answers from customers ASK a Question See questions answers

Power Acoustik Audio Store

General Features:

  • BAMF Series Class D 5-Channel Amplifier
  • RMS Power Rating:
    • 4 ohms: 200 watts x 4 chan. + 425 watts x 1 chan.
    • 2 ohms: 300 watts x 4 chan. + 650 watts x 1 chan.
    • 1 ohms: ---n/a--- x 4 chan + 900 watts x 1 chan.
    • Bridged, 4 ohms: 600 watts x 2 chan.
  • Max power output: 4500 watts
  • MOSFET power supply with IR™ audio transistors
  • Hybrid aluminum alloy heatsink for optimum dissipation
  • Direct short, thermal, and overload protection circuits
  • Variable Bass Boost (9 to +18 dB bass boost at 45 Hz)
  • 4/2 or bridged at 4 ohm channel operation
  • RCA speaker-level (low-level) inputs
  • Variable high-pass filter (70-320 Hz, 12 dB/octave)
  • Variable low-pass filter (70-250 Hz, 12 dB/octave)
  • Frequency Response: 10 - 20,000 Hz
  • Signal-to-Noise Ratio: 100 dB
  • 4 gauge power and ground wiring is required for installation
    • Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier
  • Dimensions: 7"W x 13"L x 2"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Product History:

Power Acoustik BAMF5-2500 thumbnail
(newest, current model)
Power Acoustik BAMF4500/5D thumbnail
(previous model, replaced by Power Acoustik BAMF5-2500)

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

200 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

300 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

600 watts x 2 channels

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
425 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
650 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
900 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
BAMF (Power Acoustik)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
5
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

4500 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

2100 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
2 pairs
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

70 - 320 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

70 - 250 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
100 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
9 - 18 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
No
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
90%
4 Star
10%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
5.0
Features
5.0
Design
4.7
Usability
4.5
Gregory

Pflugerville, TX

Overall
Durability
Value
Features
Design
Usability
Simply Amazing

March 21, 2015

I must simply say Amazing, class D amplification technology has really made products such as this unit a sound option in the six channel amplification market.
I replaced my 5 ch eclipse XA5000 with the Bamf 4500 due to the lack of power on the sub output on the XA, powering a Alpine 12D sub...Kappa 6.5 comp - front and Kappa 6x9's- rear deck and a Kenwood kt717 h/u in a 2004 300m, and the sound quality was superb except that the XA just couldn't handle the sub, although the XA never shut down.
After installing the Bamf 4500 insuring proper guidelines as far as 4 gauge power and ground, this is a must for this unit because it demands lots of current , and adjusting the levels, I was totally amazed at the sheer power and clarity of this unit, I had to readjust all settings on my eq and hp filters just to control this little beast and it's 3/4 the size of my XA5000...I had to turn down the sensitivity on the sub to the 11' o clock position just to keep the Alpine sub from extensive cone excursion..the bass is controlled and deep..!! and the unit barely gets warm.
In summary this is a product well worth every cent and more in my opinion, I also own a 5 ch Fusion and the Alpine 5 ch V9 in other vehicles and this unit can and will rival the V9 in power and sonic clarity for half the cost....Hmm.. Power Acoustic ...Great Job...!!

17 of 20 found this helpful

Was this review helpful to you?

ilya drujinin

Israel

Overall
Durability
Value
Features
Design
Usability
power acoustic car amplifier 4500w.

December 19, 2014

Good deal. Good product.
Already installed it beneath my sit. Works good with the pioneer 1400w subwoofer.

17 of 20 found this helpful

Was this review helpful to you?

Scott

Averill park, NY

Overall
Durability
Value
Features
Design
Usability
Awsome

August 14, 2014

It's amazing the Power this unit has considering is a five channel it is amazing for the size of it
Then again all the power acoustic equipment I've ever bought has been amazingly powerful and amazingly powerful

I would recommend this amplifier even if you're just looking for a class D sub amp go for this amplifier cause you can bring the whole system powered up
The only downside is on the remote sub controle for the amplifier the LED is he very bright so do not place in a place that it might distract you as a driver
I did and now have two stickers on it to try to keep it from blinding me at nighttime

18 of 22 found this helpful

Was this review helpful to you?

Tyler

Issaquah, WA

Overall
Durability
Value
Features
Design
Usability
The little amp that could

August 18, 2014

I have this running my entire set up as intended and it does this well especially for such a small foot print. The mids and highs are great and crystal clear, the sub channel seems to put out RAW power, I had to turn the gain way down on this channel to make it stop bottoming out my sub. Once I turned the gain to a little over halfway it is absolutely the perfect Sub 5 channel as far as I am concerned.

19 of 25 found this helpful

Was this review helpful to you?

Rob

Canada

Overall
Durability
Value
Features
Design
Usability
great

October 29, 2014

For a small amp that goes under my seat in a truck this thing is powerful despite arriving with a broken bass knob and ihad to pay to send it back (30 bucks) they replaced the part and this amp powers all door speakers and two subs .. I highly reccomend this amp. Kind of hard to connect some wires because the top lid is in the way but if u take the cover off i.stall then put it back on youre good to go

13 of 16 found this helpful

Was this review helpful to you?

Gregory

Pflugerville, TX

Overall
Durability
Value
Features
Design
Usability
Simply Amazing

March 28, 2015

Having never owned a Power Acoustic product , I am totally amazed at this units power and sonic clarity, I choose this unit because of it's specifications and price which in my opinion is well worth every cent and more...This unit replaced an Eclispe Xa5000 powering Kappa 6.5 components front..Kappa 6x9's..rear..and a 12" Alpine dvc R series sub in a ported enclosure controlled by a Kenwood Kvt717 H/U in my 04 300m...the sound was very detailed except for the bass which lacking in depth and punch due to the power output of the XA...after installing this little Bamf , my system came alive with increased clarity and the bass...I own other 5ch amps like ...R/Fosgate 5ez...Fusion..and a Alpine V9 and this unit will rival or beat the Alpine V9.

12 of 15 found this helpful

Was this review helpful to you?

MARCUS

Georgetown, KY

Overall
Durability
Value
Features
Design
Usability
Great value, well worth the price!!

March 20, 2015

This amp has plenty of power, runs very cool at 4ohms , is easy to install.

12 of 15 found this helpful

Was this review helpful to you?

Antonio

Houston, Texas

Overall
Durability
Value
Features
Design
Usability
Great amplifier

February 12, 2016

I never thought that this amplifier will exceed my expectations. I thought it would be a mediocre amp but I was surprised when I hook it up and start playing music. Crisp and clear sound. I have a 6 1/2" kicker on the front door and kicker 6x9 at the back. I have a Kenwood 12" sub and it gives a loud and crisp bass. I didn't turn the included adjuster for the sub and the bass was phenomenal. Didn't expect that a 5 channel will be this good. I always thought that you have to have 1 amp for the front and 1 to the back to make the sound good. But this thing rocks. I highly recommend this amp.

0 of 0 found this helpful

Was this review helpful to you?

Jeffrey

Keaau, HI

Overall
Durability
Value
Features
Design
Usability
Great amp.

November 15, 2015

Best bang for the buck. Puts out like stated and more.

1 of 2 found this helpful

Was this review helpful to you?

Jay

N.Y.

Overall
Durability
Value
Features
Design
Usability
Awesome amp!

October 9, 2015

Running jl audio components in front and rear of my Suzuki sx4 200watts per channel at 4ohms. Mmatts pro cast 12" sealed sub running at 600watts 2ohms. Totally amazing sound. Very powerful and clean sounding amp.

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

Your Price $39.99

Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

Your Price $19.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1250 Speaker Wire

50 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $29.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $92.52

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $448.89

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

320 Amp S Series Alternator for Custom and Racing Applications

Great for a Custom Project

Your Price $499.00

XS Power D1200

12-Volt Deep Cycle AGM Power Cell with 2600 Max Amps

Your Price $205.99

Stinger SPP1300C

1300 Amp SPP Series Dry Cell Battery with Protective Steel Case

Your Price $254.99

XS Power XP3000

12-Volt Deep Cycle AGM Power Cell with 3000 Max Amps

Your Price $319.99

T-Spec V8-3DDC

3.0 Farad Capacitor with Digital Read-Out and Built-In Distribution Block

Your Price $59.97

Precision Power PPI C.3F

True 3 Farad Digital Capacitor for Systems up to 3000 Watts

Your Price $49.99

Planet Audio PCBLK3.5

3.5 Farad Capacitor with Bright Red LED Voltage Display

Your Price $42.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $18.99

Five Piece Installer's Panel Removal Tool Kit

Remove panels the right way (Durable Nylon Plastic Pry & Chisel Tool Set

Your Price $11.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $124.99

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $5.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.95

NVX VUBT2

Universal Bluetooth Audio Receiver

Your Price $26.99

NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

Your Price $74.99

Browse 6 questions and 7 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Watts
Larry L on Aug 19, 2014
Is this a 4 channel amplifier or 5 ?? because in the general features it says 4 channels...
A shopper on Apr 7, 2015
Best Answer: It's a 5 channel, I have it in my truck. It works great!
Reply · Report · Jesus C on Apr 7, 2015
· Add Answer · I Have This Question Too (4)
Can I use this amp to simultaneously power an active front stage (components @ 125 RMS), and a sub (500 watts) at 4 ohms? Is this amp suitable for an SQ build?
Larry R on Aug 30, 2015
Best Answer: I used this amp to power MB Quart RCM216
MB Quart RKM116
Rockford Fosgate P1S2-8 (P1 S2 8 inch)

It sounds good but also wound up installing a audio control eq. I wouldn't recommend this amp in a sq build.
Reply · Report · Spencer S on Aug 31, 2015
· Add Answer · I Have This Question Too (0)
Need help, what is the best set up if i will run this at 4 ohms using 2 mid and 2 tweeter? how much power should it be per channel?
jhay1423 on Jan 20, 2016
Best Answer: Hello,

We don't understand your question. Please rephrase and resubmit. Also, all the specs are in the description , which may very well hold the answer to your question.
Reply (1) · Report · Rick MStaff on Jan 20, 2016
· Add Answer · I Have This Question Too (0)
Can i run this amp using the 4 channel at mid and high at 4 ohms and 1 ohms at my subwoofer, or vice versa?
A shopper on Jan 20, 2016
Best Answer: Hello,

Although you CAN run different impedance loads Full Range vs Sub, this amplifier is NOT stable at 1ohm through its subwoofer channel. Also, you CANNOT run the setup "vice versa" , because the Full Range outputs are Also not stable down to 1ohm.
Reply (1) · Report · Rick MStaff on Jan 20, 2016
· Add Answer · I Have This Question Too (0)
Can this product be used to drive 4 door speakers of 4ohms plus 1 sub of 2ohms ?
A shopper on Sep 17, 2015
Best Answer: Hello ,

Yes. All 5-Channel amplifiers have that ability.
Reply · Report · Rick MStaff on Sep 19, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

BAMF4500/5D

UPC

709483047334

Weight

7.40lbs

Internal SKU

bamf45005d

Internal Product ID

76636

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Power Acoustik BAMF4500/5D