System Interface Kit to Add or Replace An Amplifier in All 1995-2002 Nissan Vehicles with Bose Audio System
Product highlights
• Interface Allows Replacement/Addition Of Amp
• For 1995-2002 Nissan Vehicles w/Bose System
• 4 Channel Interface
• 16/18 Pin Connectors
This AOEM Kit Includes the following:
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Best selling similar products
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2011-2025 vehicles from Ram, Dodge, Jeep with non-amplified systems
(10)
$93.99
List price $104.99
• Amplifier and subwoofer integration interface for select 2013-2024 vehicles from Ram, Jeep, Dodge
• Compatible with amplified vehicle systems
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier and subwoofer
• Delivers 5V RMS pre-amp output with bass equalization and level control
$239.00
List price $329.00
• Plug and Play T-harness for faster installation
• For select 2019-2024 vehicles from Chevrolet, GMC, Cadillac
• Designed for Ethernet amplifiers
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
(3)
$517.99
List price $613.99
• Amplifier and subwoofer integration interface for select 2021-2026 vehicles from Ram, Jeep, Dodge
• Compatible with amplified vehicle systems
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier and subwoofer
• Delivers 5V RMS pre-amp output with bass equalization and level control
$239.00
List price $329.00
• Amplifier integration interface for select 2003-2014 vehicles from Ford, Lincoln, Mercury
• Compatible for vehicles without amplified THX and Sony systems
• 4-channel RCA output
• Linear 20-20000 Hz sound reproduction
• For use with an aftermarket amplifier
(26)
$56.99
List price $129.00
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2014-2025 vehicles from Hyundai, Kia with non-amplified systems
(1)
$93.99
List price $104.99
• Amplifier integration interface for select 2013-2023 vehicles from Ram, Jeep, Dodge
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier
• Delivers switchable 4-volt or 5-volt RMS pre-amp output
(4)
$419.00
List price $499.00
• Plug and Play T-harness for faster installation
• For select 2010-2021 vehicles from Chevrolet, GMC, Cadillac
• Designed for MOST amplified systems
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
$638.99
List price $709.99
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2011-2025 vehicles from Ford with non-amplified systems
(3)
$93.99
List price $104.99
• Amplifier integration interface for select 2019-2025 vehicles from Chevrolet, GMC, Cadillac
• Vehicle must be amplified and with a factory Bose system
• Provides a 6-channel pre-amp output
• Delivers 5V RMS pre-amp output with bass equalization and level control
(4)
$479.00
List price $549.00
Manufacturer:
Model Number:
AOEM-NIS2
Weight:
0.50lbs
Internal SKU:
aoemnis2
Internal Product ID:
7714
| 5 star |
|
57% |
| 4 star |
|
43% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Save time, and your stock harness!
I wanted to add an amplifier to my stock sound system in my 2005 Nissan Titan for a sub woofer. The PAC AOEM-NIS2 was very simple to install, and I was able to get clean signal to my amplifier without having to cut or tap into any speaker leads. The visually stock system draws no attention to would-be thieves.
Take this advice from me, spend a little, save time on your installation, and keep the stock wiring harness intact!
26 found this helpful
for my nissan altima
Works great, does exactly what it is meant to do. No problems. Setting the gain for each channel via the small pots through the holes in the enclosure is not my favorite thing.
19 found this helpful
Nissan Murano Tunes
It works great as advertised. Installation was a snap up in running in 30min!
18 found this helpful
Way too easy PAC OEM
If you want to keep the factory look and add an after market amp and sub, The PAC units are the way to go, easy to install plug and play, took me 5 minutes from start to finish Just unplug the factory harness and plug in the PAC unit in between, 2 clean sets of RCA's, you only need to use 1 butt connector for the remote turn on. and that's it.
I only use the rear pre-amps because I am installing a small amp and subwoofer in my Maxima and want the factory look.
20 found this helpful
Great unit to add on to your Nissan
Great unit to add on to your Nissan. This unit can be added onto the Amplifier on your original car audio head unit, make the sound rock. I love this unit because it can let me modify the audio output without cutting the original Nissan speaker wire.
19 found this helpful
PAC AOEM For my 02 Maxima
I started having trouble with my Bose Sub Woofer and when I started pricing them to replace it I found them to be over priced. I looked into after market and found the prices to be more reasonable. The best thing is now that I have the PAC AOEM my system is totally ready for my future upgrades.
15 found this helpful
worked great
this worked exactly as described. no additional part or pieces needed
2 found this helpful
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
