Expert Service 1-661-257-9993 [Hours]

Phoenix Gold Ryval V10S

Single 4 ohm 10" Subwoofer (Rival)

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

Phoenix Gold Ryval V10S

Single 4 ohm 10" Subwoofer (Rival)

$39.99

Keep Shopping

Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 3/4" MDF Shallow Sub Enclosure w/ Premium Carpeted Finish

$39.99

Add
NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Phoenix Gold Ryval V10S.

Get FAST answers from customers ASK a Question See questions answers

  • 10" Single 4 Ohm Ryval Series Subwoofer
  • Power Handling:
    • Peak: 600 watts
    • RMS: 150 watts
  • Impedance: Single 4 ohm
  • Laminate-treated Paper Cone
  • High Excursion Triple Layer UV-Treated Foam Surround
  • Rigid powder coated steel frame
  • Optimized magnet/motor structure
  • 4 ohms impedance
  • Top-mount depth: 5"
  • 1-year SonicElectronix.com warranty

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
600 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
150 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
27 - 300 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
87 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
7.7 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Laminate-treated Paper
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
UV Treated Foam
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.4 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.15 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.6 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
2.4 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5.0"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9.3"

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
57%
4 Star
43%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.7
Value
4.6
Features
4.1
Design
4.6
Usability
5.0
Daniel

phoenix, AZ

Overall
Durability
Value
Features
Design
Usability
A great speaker for the money.

December 22, 2009

I have had some great speakers before and these are by far one of the best. And for the price...... NO comparison. Over all, great speaker.

7 of 8 found this helpful

Was this review helpful to you?

Robert

Brownsville, WI

Overall
Durability
Value
Features
Design
Usability
great sub.

April 4, 2009

Please buy this subwoofer. you may have never heard of phoenix gold, but this competition class sub pounds hard. if your looking to replace a 10inch sub from an old speaker stand, (like i did), or need another sub to pound the streets up in your local city. this sub can pound as heavy as you need it to.

7 of 8 found this helpful

Was this review helpful to you?

Kalen212

Moore, Ok

Overall
Durability
Value
Features
Design
Usability
Phoenix Gold

December 10, 2009

I had two of these in my s10 being pushed by a cheap 400 watt amp and they hit plenty hard for me and turned heads..

5 of 6 found this helpful

Was this review helpful to you?

Thomas

Sterling, CO

Overall
Durability
Value
Features
Design
Usability
Great SUBS

July 11, 2008

I just got these today and I wired them in and they sound great, I listen to UNDERGROUND METAL and they hit HARD and FAST.

6 of 8 found this helpful

Was this review helpful to you?

Tyler

Jefferson, IA

Overall
Durability
Value
Features
Design
Usability
def. a good buy

April 10, 2008

my friend has 2 of these subs with a 1200W amp and they hit like no other, i DEF. recomment this.

6 of 8 found this helpful

Was this review helpful to you?

Mason

Marietta, GA

Overall
Durability
Value
Features
Design
Usability
Great Sound!

June 22, 2009

I was a little weary at first, being that this sub is 'only' 300 watts rms, especially since the amp it came with puts out only 150 watts but I had heard that Phoenix Gold was a really good brand, so I bought it anyway. And I love this sub! 300 watts is plenty for my car ('98 Prelude SH) and I never have to turn the sub up very high before the whole car is thumpin' ( I know, it's a Honda). The sound quality is amazing too. I have friends with other brands that put out 1200 watts, and I thought theirs' sounded good but nothing compares to the quality and natural bass sound that comes from this little guy. I would recommend this sub to anyone.

4 of 5 found this helpful

Was this review helpful to you?

Ronald

Houston, Texas

Overall
Durability
Value
Features
Design
Usability
Not bad at all !

January 20, 2009

I own this speaker and use it in my S10 ext cab. It is in a 1^3 foot slotted enclosure (prefabbed) and it plays reasonably deep for a ten incher. (It's probably just the tuning of the box )Doesn't quite compare to kickers' bottom of the line speaker, but at this price, you can get two! Good SQ and SPL for a thirty-five dollar speaker. I am pushing this subwoofer with approximately 170 watts RMS and it doesn't skip a beat at high volumes. I recommend buying this speaker if you are on a budget and need some throw downs. Heck, you might even think about keeping them!

5 of 7 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 3/4" MDF Shallow Sub Enclosure w/ Premium Carpeted Finish

Your Price $39.99

Dual 10" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 3/4" MDF Shallow Sub Enclosure w/ Premium Carpeted Finish

Your Price $59.95

Single 10" Sealed MDF Subwoofer Enclosure

10" Sealed 3/4" MDF Enclosure Lined w/ Polyfil.

Your Price $34.99

Dual 10" Sealed MDF Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

Your Price $49.99

Single 10" Sealed MDF Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

Your Price $27.99

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $37.85

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $53.99

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $64.87

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $87.63

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.97

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $16.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $3.44

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 Phoenix Gold Ryval V10S Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 Phoenix Gold Ryval V10S Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 Phoenix Gold Ryval V10S Subwoofers

4 Channel Amp

4 Phoenix Gold Ryval V10S Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

V10S

UPC

083713070300

Weight

10.00lbs

Internal SKU

pg-v10s

Internal Product ID

9312

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Phoenix Gold Ryval V10S