Expert Service 1-661-257-9993 [Hours]

Audiopipe Class-D Monoblock 1-Ohm Stable - APMI-2000 (APMI2000)

2000W Peak (1944W RMS) APMI Series Class-D Monoblock 1-Ohm Stable Mosfet Car Amplifier

Out of Stock - Backorder
|

List price $269.99

You Save: $80.04 (29.65%)

Thanks , You Pay:

$189.95

with warranty

+ FREE Shipping in US 48

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

Audiopipe Class-D Monoblock 1-Ohm Stable - APMI-2000 (APMI2000)

2000W Peak (1944W RMS) APMI Series Class-D Monoblock 1-Ohm Stable Mosfet Car Amplifier

$189.95

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$22.99
Add Warranty
3 years of protection

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!

$149.99

Add
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$12.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$199.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Audiopipe Class-D Monoblock 1-Ohm Stable - APMI-2000 (APMI2000).

Get FAST answers from customers ASK a Question See questions answers

Audiopipe Car Audio Store

General Features:

  • APMI Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 770 watts x 1 chan.
    • 2 ohms: 1300 watts x 1 chan.
    • 1 ohm: 1944 watts x 1 chan.
  • Max power output: 2000 watts
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Parametric Bass Boost Equalizer
  • Soft start turn-on
  • Preamp RCA output to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • Input sensitivity: 200mV - 5V
  • Frequency Response: 8 - 180 Hz
  • Total Harmonic Distortion (THD): <0.2%
  • Signal to Noise Ration: >70dB
  • Variable low-pass filter: 40 - 180 Hz
  • Subsonic filter: Off - 50 Hz
  • Variable Bass Boost: 0 to +12 dB bass boost at 30 - 80 Hz (variable)
  • Fuse Rating: 150A x 1
  • 0/1 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 6.49"W x 16.39"L x 2.20"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Product History:

Audiopipe APMI-2000 thumbnail
(newest, current model)
Audiopipe APSM-2000 thumbnail
(previous model, replaced by Audiopipe Class-D Monoblock 1-Ohm Stable - APMI-2000 (APMI2000))

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
770 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1300 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1944 watts x 1 channels

Power Specifications - Subwoofer Channel

Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

2000 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
APMI (Audiopipe)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

2000 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

1944 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
1/0 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
1 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<0.2%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 180 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
0 - 50 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>70 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
No
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Not Tested

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
85%
4 Star
8%
3 Star
8%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
4.8
Features
4.8
Design
4.8
Usability
5.0
Luis

Louisville, KY

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Audiopipe APMI-2000

April 23, 2015

This amp is great , i have it connected on 2 12 " alpine type r's and the epicenter and they rock my car! It's made of good material and it'd good for the price . I recommend this product, the only is that that could put a fuse in case it blows but this amp doesn't have it like other ones but no big deal !

22 of 25 found this helpful

Was this review helpful to you?

Shayne

Hendersonville, NC

Overall
Durability
Value
Features
Design
Usability
Audiopipe Apmi 2000 review

April 14, 2015

Awesome awesome awesome amp for the price! Beastly amp, not as power hungry as people say audiopipe amps are. The size is really good for a 2000 watt amp as well. I'd highly recommend this amp to my friends or someone looking for a good 2000 watt amp that wont break the bank!

11 of 14 found this helpful

Was this review helpful to you?

Corry

Memphis, TN

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
The best amplifier I ever owned!!!

November 13, 2016

I'm from Memphis,TN and we like are bass this amplifier is the best one I've owned honestly and I am going to put one of these in all my cars... Cdot

0 of 0 found this helpful

Was this review helpful to you?

Andre

Lawrence,ma

Overall
Durability
Value
Features
Design
Usability
Audiopipe

July 15, 2016

Audiopipe mono block amp works great good quality highly recommend it

0 of 0 found this helpful

Was this review helpful to you?

Rem

araundville L.A.

Overall
Durability
Value
Features
Design
Usability
The best amplifier ever

July 4, 2016

The watts are true watts and never cuts off has a fan build in to the amplifier.This is the best amplifier every...

0 of 0 found this helpful

Was this review helpful to you?

Willie

Boston

Overall
Durability
Value
Features
Design
Usability
APIMI 2000

July 4, 2016

Great seller and outstanding fast shipping. I've never experienced Audiopipe before but these amps are great for the cost.

0 of 0 found this helpful

Was this review helpful to you?

Mike

Webb city, MO

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Not what i was hoping for

June 16, 2016

This amp is ok don't get me wrong its not a bad amp for the money. I did a bunch of research before buying this amp it came in yesterday hooked it up not much difference truly between this amp and the kicker cx1200.1 I have been running I needed a 1ohm stable and my soundqubed hds300 15 isn't pounding any harder at 1ohm at 1900watts then it was on about 550at 4ohm

0 of 0 found this helpful

Was this review helpful to you?

Tricky

Fuck, u

Overall
Durability
Value
Features
Design
Usability
Very pleased!!!!

May 31, 2016

Very happy with my audiopipe 2000 watt mono block amp. Its pushing four twelove inch powerbass subs. And it's doing quite well, the does get hot rather quick at high volumes thou. But other than that, it's awesome

0 of 0 found this helpful

Was this review helpful to you?

Bagged Mazda guy

Pasco Washington

Overall
Durability
Value
Features
Design
Usability
Audiopipe amp

April 3, 2016

I have the audiopipe apmi 2000 amp and its pushing 3 12inch pioneer champions at 1300 Watts RMS and they sound great I'm running the amp at 2.67 ohms and amp does perfect i will always recomend audiopipe to anyone that is lookng for a good amp at good price

0 of 0 found this helpful

Was this review helpful to you?

Slammed_mk4

Ohio

Overall
Durability
Value
Features
Design
Usability
Good amp great output

April 1, 2016

Naught this to run my two 12s to replace my planet audio amp made a huge difference will be buying a second in the future one for each sub I do car audio comps is a lil power hungry but great amp for price have recommended to several friends

0 of 0 found this helpful

Was this review helpful to you?

Cj

Lincoln NE

Overall
Durability
Value
Features
Design
Usability
Awesome amp I have it running 4 mofo 12

March 20, 2016

Great budget amp. I have it running 4 mofo 12 in my Yukon. I haven't had the chance to put it on a oscope yet to check clean power. The subs are wired at 2ohm right now breaking them in. The amp so far is awesome power plan on getting another one when I can upgrade my alt

0 of 0 found this helpful

Was this review helpful to you?

Joe

Frankfort ny

Overall
Durability
Value
Features
Design
Usability
Great amp for price

March 19, 2016

This amp for price is a great value I would recommend them to everybody I talk to

0 of 0 found this helpful

Was this review helpful to you?

poonmaster

riverton

Overall
Durability
Value
Features
Design
Usability
audiopipe apmi-2000w

December 8, 2015

this amp is a beast it is good for budget builds like i am doing it delivers great power it blew my brothers mofo 15 in 10 minutes with the gain properly set. also the power wire terminals are super fat and i am impressed with the overall quality of the product for under $200 i have i running two audiopipe txx-bd1 15s but it blew one of those too. because they where not fully broke in:( but i will be buying more for my next build with four 15s and two of these great amps!!

1 of 2 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!

Your Price $149.99

Stinger SK6201 0-Gauge Wiring Kit

You only get great sound when you use great wire. This Stinger kit will do the trick! Don't forget the RCA's!

Your Price $119.99

Belva BPK0D Dual Amp 0/4-Gauge Wiring Kit

Enough wire for 2 amps! Don't forget the RCA's!

Your Price $39.99

NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

Your Price $12.99

PAC LP7-2

L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On

Your Price $21.95

AudioControl LC2i

2 Channel Line Out Converter with AccuBASS & 5-year warranty*!

Your Price $79.99

Kicker KISLOC

2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter

Your Price $24.95

AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

Your Price $199.99

The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $129.99

AudioControl THE-EPICENTER-WHITE

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $139.99

NVX XBBR

Looking to fine tune the bass in your vehicle? Look no further

Your Price $79.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

NVX XIX25 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $14.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $92.52

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $448.89

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

XS Power D925

12-Volt Deep Cycle AGM Power Cell with 2000 Max Amps

Your Price $169.99

SHURiKEN SK-BT100

12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts

Your Price $196.96

Rockford Fosgate RFC2D

Hybrid 2.0 Farad Digital Stiffening Capacitor

Your Price $129.99

Planet Audio PCBLK2.0

2.0 Farad Digital Capacitor with LED Display

Your Price $34.99

Belva BB2D

2.0 Farad Capacitor with Digital Red Display

Your Price $34.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $18.99

Five Piece Installer's Panel Removal Tool Kit

Remove panels the right way (Durable Nylon Plastic Pry & Chisel Tool Set

Your Price $11.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $124.99

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $5.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.21

Browse 12 questions and 28 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
i fried my other Audiopipe amp
Kaleb H on Nov 28, 2016
cause its a good amp
Fabian S on Sep 16, 2016
the amp is a great product and cant beat the price and performance
joe y on Sep 30, 2016
Has the power I am looking for and a good price
miles p on Jun 27, 2016
Can I run 3 audio pipe txxbd 12 subs with this amp.?
don d on Sep 22, 2016
Best Answer: you can do what ever you want just make sure that your subs are wired down and your speaker will need to be 2 ohm load if you doing 3 subs and your speakers need to be 4 ohm load if your doing only 2 subs the Audio-pipe is a very powerfully amp never turn this amp up over half or you will fry your subs off of a single song with a lot of bass.
Reply · Report · Marcell C on Sep 23, 2016
· Add Answer · I Have This Question Too (0)
i have 2 earthquake db 15's rated @ 450 rms each will the apmi2000 be too much if so can anyone recommend anything ?
randellski on Apr 24, 2016
Best Answer: The Audiopipe Apmi- 2000 would be perfect. If it starts to distort just turn the volume down a little. It's always better to have more than enough power than too little power. How many ohms are each speaker? The amp is 1 ohm stable awesome amp!
Reply · Report · Danny I on Apr 25, 2016
· Add Answer · I Have This Question Too (0)
What is the true rms of this amp at 2ohm on standard car electrical?
A shopper on Sep 27, 2015
Best Answer: I'm running 2 of them strapped at .5ohm each. (Will ruin warranty). But I clamped 3610w at 13.2v on music.
Reply (2) · Report · brian o on Sep 27, 2015
· Add Answer · I Have This Question Too (0)
Can this amp be strapped to another APMI-2000?
Shaun J on Nov 18, 2015
Best Answer: The APMI-2000 is not designed to be strapped.
Reply · Report · Rick MStaff on Nov 18, 2015
· Add Answer · I Have This Question Too (0)
I'm going to run a Audiopipe APMI 1300 to a single Pioneer TS-W3003D4, it's a monoblock amp but it has 4 speaker terminals (2+ and 2-) does it matter which 2 of these you use ? I'm going to run the sub at 2ohms.
A shopper on Oct 15, 2016
Best Answer: No, it does not matter which you use. They both lead to the same internal terminal. The "second terminal" is to make installation of a second subwoofer easier. For example, if you added a second subwoofer, you simply wire it to 2ohms and the amplifier will see 1ohm, because it comes together internally (in parallel).
Reply · Report · Rick MStaff on Oct 17, 2016
· Add Answer · I Have This Question Too (0)
What size capacitor should I use with the 1000W Mini Design Class D Mosfet Amplifier APMI-1300 ?
A shopper on Oct 9, 2016
Best Answer: A 1 Farad capacitor will suffice for a 1000W Mini Design Class D Mosfet Amplifier APMI-1300 .
Reply · Report · Rick MStaff on Oct 10, 2016
· Add Answer · I Have This Question Too (0)
will this amp be as powerful as the Audiopipe APCL-15001D?
foster p on Oct 3, 2015
Best Answer: Hello Foster,

All the figures needed to answer your question are located in the description of each amplifier's product page; because of this, we aren't sure what is you are asking - the APMI-2000 shows higher RMS figures than the APCL amplifier.

APCL-15001D
RMS Power Rating:
4 ohms: 600 watts x 1 chan.
2 ohms: 950 watts x 1 chan.
1 ohm: 1500 watts x 1 chan.

APMI-2000
RMS Power Rating:
4 ohms: 770 watts x 1 chan.
2 ohms: 1300 watts x 1 chan.
1 ohm: 1944 watts x 1 chan.
Reply (1) · Report · Rick MStaff on Oct 5, 2015
· Add Answer · I Have This Question Too (0)
it says I can get the amp and wire kit for 233 but when I got to checkout it says 244 why is that?
A shopper on Jul 14, 2015
Best Answer: Hello ,

It sounds like you didn't hit the "Add Both to Cart" button as instructed to.

http://screencast.com/t/X88d57ch

If you are using said button, but aren't getting the desired total, then give our Sales Team a call. They will happily make the adjustment for you .
Reply · Report · Rick MStaff on Jul 14, 2015
· Add Answer · I Have This Question Too (0)
need to know what size fuse i should use with this at the battery?
A shopper on Jun 19, 2015
Best Answer: 2000 / 12 = 166 amps. 150 to 200 ish id say
Reply · Report · Spencer A on Nov 17, 2015
· Add Answer · I Have This Question Too (0)
Will this amp push 3 kicker compR 12's?
Michael g on Jun 8, 2015
Best Answer: Hello Michael,

Your question cannot be accurately answered, because you didn't specify which "kicker compR 12's" you are referring to. In just the "current" models, there are four different options/configurations. Please provide a Model Number , not a description. http://goo.gl/gCgWsg .
Reply (1) · Report · Rick MStaff on Jun 9, 2015
· Add Answer · I Have This Question Too (0)
What size is the included fuse?
Mark F on Nov 20, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

APMI-2000

UPC

784644416570

Weight

15.00lbs

Internal SKU

apmi2000

Internal Product ID

93386

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Audiopipe Class-D Monoblock 1-Ohm Stable - APMI-2000 (APMI2000)