Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Orion HCCA 15.4 (HCCA15.4)

15" Dual 4 ohms Subwoofer (HCCA154)

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

hcca154 thumbnail

Orion HCCA154

OUR PRICE: $499.95

View item

These SPL woofers are most impressive. Orion HCCA subwoofers might possibly be the baddest subs on the planet. Hands down. With its massive 4" high temp voice coil and immense motor, this subwoofer can reach as much as a 4" excursion. A higher excursion equals more bass! Orion HCCA subs have a long history of competition dating back 8-years or more. Why are they so efficient? Why are there so many positive reviews?

Orion made these subwoofers with extreme quality control. They listened to the SPL crowd and dished out a high powered durable subwoofer that can handle its own weight in a match. To keep your sub going Orion offers a field replaceable cone kit so your never out of the game. Everything on this woofer is enhanced from its voice coil cooling system to the conex spiders. This sub will take whatever you throw at it and trust us, it is power hungry.

  • 15" HCCA Series Subwoofer
  • Power Handling:
    • Peak: 4000 watts
    • RMS: 2000 watts
  • Impedance: Dual 4 ohms
  • Polypropylene cone
  • Wide foam surround
  • Dual Flat Conex Spiders with Loop/Stitched Tinsel Lead
  • Field Replaceable Cone / Voice coil / Spider Assembly
  • 4 copper Wound Voice Coil on an Aluminum Former, High temperature PAARC (Polyester Amide, Amide Resin Coated)
  • Enhanced voice coil cooling system (forced convection aluminum heat sinking shorting rings to reduce inductive heating)
  • Sensitivity: 84 dB
  • 1-year SonicElectronix.com warranty (any blown woofer or cone problems must be resolved by purchasing the cone replacement item and are not covered under the warranty)

Product History:

Orion HCCA154 thumbnail
(newest, current model)
Orion HCCA-15.4 thumbnail
(previous model, replaced by Orion HCCA154)
Orion H2.15.4 thumbnail
(previous model, replaced by Orion HCCA 15.4 (HCCA15.4))

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
15"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
4000 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
2000 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
24 - 250 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
87 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
30 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Wide Foam
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
Yes (Accessory available and sold separately)

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
11-5/8"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
15-1/16"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Warranty and Return Policy

Parts Warranty Duration
Not warranted
Labor Warranty Duration
Not warranted
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
4.5
Features
4.5
Design
4.5
Usability
5.0

-LOS-

Springdale, AR

Overall
Durability
Value
Features
Design
Usability

Bad Azz Sub

June 21, 2009

I would definately reccommend this subwoofer to anyone out there that absolutely cant get enough bass. This thing is very heavy and VERY LOUD!!!!. The fact that I have one in my car is insane. I love bass too death but Its hard sit in my car when I play this thing at high volumes. When I first got this sub, I had it wired at 2 ohms to a Kenwood KAC-9104D, which is suppose to put out "900" watts rms (amp doesnt really put out that much power) and it was loud then. Now I have it hooked up to Kicker ZX1500.1 and believe me this sub does not mess around. It looks like it wants more power. This sub is definately top of the line in the subwoofer wars!!! Get it! You WILL NOT be dissapointed at all!

0 of 0 found this helpful

Help our customers find the most helpful reviews

myhcca15

statesville,nc

Overall
Durability
Value
Features
Design
Usability

orion hcca 15

December 22, 2008

this sub is a beast, i have one in my car and it hit 140.6 on a termlab at the headrest rest with only 800 watts!!!!! soon to be 2500 watts probably won't be able to sit in it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

15 Dual Sealed Single Cab Truck Subwoofer Box

Durable 11/16" Medium Density Fiberboard (MDF) construction.

Your Price $89.95

Single 15" Sealed MDF Subwoofer Enclosure

15-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil.

Your Price $44.99

NVX 20 ft. of True Spec 8 Gauge Speaker Wire

Flexible multi-strand cable bends and twists to meet your installation needs.

Your Price $49.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $119.99

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.95

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $89.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $3.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

15" Protective Waffle Metal Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe with its durable metal construction!

Your Price $6.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

AutoSound 2000 CD-101

Low frequency test CD

Your Price $11.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 Orion HCCA 15.4 (HCCA15.4) Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 Orion HCCA 15.4 (HCCA15.4) Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 Orion HCCA 15.4 (HCCA15.4) Subwoofers

Mono Amp

4 Channel Amp

4 Orion HCCA 15.4 (HCCA15.4) Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Product Summary

Manufacturer

Model Number

HCCA-15.4

UPC

093207052583

Weight

86.00lbs

Internal SKU

ori-hcca154

Internal Product ID

9801

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Orion HCCA 15.4 (HCCA15.4)