Wire Harness to Connect an Aftermarket Receiver in Select 2006-Up Non Onstar, Bose/Non Bose GM Vehicles
Product highlights
• GM LAN High Speed Stereo Replacement Interface
• 12V Accessory Power Driven Via Data
• Fully Compatible With Factory Retained Accessory Power • Compatible With Both Non-Bose and Bose Systems
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Best selling similar products
iDataLink Maestro RR Interface Module
• Universal stereo replacement interface module
• Connects to iDataLink-compatible stereos
• Retains SWC, voice commands, etc.
• Enhances multimedia experiences with exclusive gauges, vehicle info, parking assistance, climate control, and radar detection
(36)
$189.99
List price $229.99
Crux DKGM-49 Stereo Replacement Interface
• Stereo Replacement Interface with Dash Kit
• Fits select 2006-2020 vehicles from GMC, Chevrolet, Buick Vehicles
• Accommodates ISO Double DIN Mount
• Retain steering wheel controls and chime functions
(41)
$129.60
List price $201.60
• Direct connection to the factory radio harness
• Color coded wires for easy installation
• No cutting or splicing required
(97)
$5.99
List price $6.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(51)
$12.99
List price $6.99
• Direct connection to the factory harness
• Designed for select Pioneer stereos
• Color coded wires for easy installation
• No cutting, splicing, and hardwiring required
$16.99
List price $18.99
• Provides 12-Volt accessory power (RAP)
• Designed for non-amplified and amplified models
• Retains balance and fade
• Pre-wired for steering wheel audio controls
(25)
$99.99
List price $299.00
iDataLink Maestro RR2 Interface Module
• Advance stereo replacement interface for select vehicles
• Offers exclusive infotainment retention
• Adds support for additional vehicles
• Enables Bluetooth programming directly from mobile device
• Retains OnStar, SYNC, Uconnect, and more
(5)
$259.99
List price $319.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(56)
$9.95
List price $6.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(63)
$9.95
List price $6.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(246)
$7.95
List price $8.99
Manufacturer:
Model Number:
GM22SR
Weight:
0.50lbs
Internal SKU:
gm22sr
Internal Product ID:
10055
| 5 star |
|
50% |
| 4 star |
|
25% |
| 3 star |
|
17% |
| 2 star |
|
8% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
worked great for 2007 Chevy silverado
Worked great with no heavy modifications just follow the instructions and it will go smoothly worked great for me
22 found this helpful
Nice
Easy to use & install, comes with it's own relay & color to color wire connection. All of you're chimes will change a little bit (blinker, seat belt warning, door opening) etc. This wasn't a big deal to me but it my be for you. The blinker is a completely different sound & the others are similar to the og chime. This also has a volume adjustment for the chimes themselves. Installed this harness in my 09 Impala ss & my friend's 11 Silverado. Wish I didn't need it but it works great!
22 found this helpful
Scosche is Good
I like this unit better than the PAC unit. They both work fine but the PAC unit chimes were too load for me.
19 found this helpful
Works great.
It works fine and I have had no problems with it.
20 found this helpful
Hmm
Used to make door chimes and blinker noise ect work with aftermarket stereo in 11' chevy express work van. Product works but speaker sounds like junk.
19 found this helpful
needed
The fact you have to have this for an after market stereo is a little ridiculous but works great...
17 found this helpful
Needed part
I own a newer GMC pick up truck and wanted to replace the basic stock radio with an after market NAV radio. This part is needed to receive turn signal tones and basic chiming for the vehicle. The directions made it easy to install.
18 found this helpful
Worked great
Easy to install, and worked without flaw.
17 found this helpful
ok
worked with chimes and al other STUFF (wished i did NOT need it). It does what it says
14 found this helpful
Works & sounds okay, but no "Door Lock" chime
I installed this interface in my 2010 Chevy Impala (without Bose nor OnStar, former rental vehicle), with a Pioneer FH-X700BT head unit. The blinker "click" is totally different, but I kinda like it. Door chimes and other sounds are fine. However, one disappointment is that there is no chime when I hit the door lock button - the stock system dings 2 or 3 times when this button is pressed. As a result, the rating will be lower.
15 found this helpful
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
