Dynamic Control Dynaxorb Pad for Speakers
Dynamat Dynaxorb Speaker Pak • Use Behind Speakers & Inside Subwoofer Enclosures • Contains Two 1/4" Thick 6" x 6" Squares • Works Best when Installed Over Dynamat Xtreme
Learn more about the dyna-11800Dynamat Dynaxorb Speaker Pak • Use Behind Speakers & Inside Subwoofer Enclosures • Contains Two 1/4" Thick 6" x 6" Squares • Works Best when Installed Over Dynamat Xtreme
Dynaxorb is black, energy absorbing, and sound diffusing advanced polymer square that eliminates speaker back-wave noise and distortion. Dynaxorb absorbs, diffuses and attenuates the sonic energy directed towards it. Removing back-wave interference from the speaker allows every speaker to produce the full quality potential it was designed for.
Dynaxorb ApplicationsDynaxorb is most effective when installed behind speakers and inside subwoofer enclosures. When used with car speaker door installation, install Dynaxorb to the panel directly behind the speaker. In subwoofer enclosures, use multiple Dynaxorbs to line the enclosure wall that is directly behind the subwoofers. This kit contains two 6" x 6" squares with a thickness of 1/4".
Easy to InstallDynaxorb squares can be used individually with smaller speakers or tiled together to line the opposing wall inside subwoofer enclosures. It can easily attached to any substrate by using a cyanoacrylate adhesive aka Krazy glue. Trim to desired size with a knife or scissors. Next, remove dust, grease, moisture, and other foreign matter from the application surface and apply. For best results, treat the area behind the speaker with Dynamat Xtreme then install Dynaxorb directly over the Dynamat.
Best selling similar products
Manufacturer:
Model Number:
11800
Weight:
0.50lbs
Internal SKU:
dyna-11800
Internal Product ID:
3358
Good product
Works surprisingly well in doors might be worth it more in a sub box. I could actually hear a difference immediately.
35 found this helpful
Works pretty well
Cuts down on back wave interference, as advertised. I definitely noticed a reduction in the reverberations at the mid-range frequencies; I was getting a lot of interference during palm mutes in thrash metal songs before installing these dampeners. I am pleased with the results overall, and the sound quality is better. They might not provide very much improvement in some applications, but for me they worked pretty well.
32 found this helpful
Use in a harley
Ordered this product from advise of other harley riders who wanted a better sound from their bikes speakers. Seems to work well, no complaints.
32 found this helpful
Really works!!
These little things are a 150% better than fiber-fill and they dont take up valuable space like fillers do. Ive have seen a great change in sound quality and my cones dont make weird noises any more...
32 found this helpful
Dynamat Dynaxorb Speaker Pak 11800
If you establish at doors of dynamics with the bottom boundary frequency not below 90 hertz you will very strongly gain this decision. Small enough weight, convenience and speed of installation will allow you to muffle a door of your car decently enough. If all is required to apply more low-frequency loudspeakers better certainly to apply that that more serious.
30 found this helpful
Easy to install
Seems to work well. Installed easily.
29 found this helpful
it dose make a diffrence!!!
i have a pioneer component set ran off a amp. *doing rated RMS* i seen these and gave them a try. dynaxorb did make a nice difference. these are worth the price if you want or have quality speakers and want the sound they were made to have, or better the sound. must buy! only from sonic tho of course :)
28 found this helpful
Noticeable?
I bought this product with the intent originally to tile it on the back of my sub box inside, and hopefully get a better sound response. Instead I put them in the door panels and never tried the speakers without this installed ( the speakers were brand new and never used before) I don't know if it makes much of a difference, but my miss sound very good compared to before. Then again it's a whole new speaker so I can't tell!!
28 found this helpful
Home made speaker box
I made a steel speaker box out of a small rectangle tool box to fit between the roll bars in my Toyota FJ40. I am using Pioneer 6" round speakers slammed next to each other in the box. Mounting the speakers on the hinged lid and applying the Dynamat Dynaxorb Speaker Pak 11800 in the bottom of the box. Originally the sound was tinny / and tiny. With the pads it helped bring out the high's. An open truck is not the best environment for sound quality but at least I can here my radio/player with some high's now. Bye, Ty
27 found this helpful
not much
i didn't notice much of a difference in sound after i put these in.
27 found this helpful
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.