Garage
Shop

Kicker SS65.2

6-1/2" 2-way SS Series Matched Component Speakers System

Kicker
Shop all Kicker
highlight-star-icon

6-1/2" 2-Way Matched Component System • 200W Peak • 100W RMS • 30mm Tetoron Soft Dome Tweeter (Coaxial Mountable) • Tri-Tech Cone • Crossovers and grilles included • Sealed and Tuned Tweeter Enclosure • Protective Case

Learn more about the 04ss652

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

41qss654 thumbnail

Kicker 41QSS654 (QSS654)

OUR PRICE: $599.95

View item

Description


Kicker brand icon

Authorized dealer

  • 6-1/2" 2-Way Matched Component System
  • Peak Power Handling: 200 watts
  • RMS Power handling: 100 watts
  • 3 Ohm Impedance
  • CROSSOVER
    • System Optimized Two-Way Asymmetrical Passive Crossover Network Provides 24 dB High Pass and 12 dB Low Pass at 2.8Khz for seamless transition from midrange to tweeter
    • Air Core Inductors Provides higher power handling with less ‘signal smear’ and magnetic saturation when compared to other ‘core’ type inductors
    • Mylar Film Filter Capacitors Used in tweeter crossover section for smooth and extended high frequency response
    • 3 Position Tweeter Attenuator Select from 0 dB, +1.5 dB or + 3.0 dB tweeter output level for level matching the tweeter to the midrange due to personal taste or mounting locations
    • Zobel Impedance Compensation Provides more linear response across the operating range and prevents crossover point shift by correcting impedance rise
  • TWEETER
    • DuPont® Tetoron® (Soft Dome) 30mm Diameter Tweeter Used to provide ultrawide frequency response. Excellent balance between high and low end frequency response
    • Ferro-Fluid™ Cooled Voice Coil Enhances the thermal transfer from voice coil to the motor structure for higher power handling and decreased power compression
    • Dual Neo Magnets In Tweeter Top and bottom magnets provide a reduction in overall tweeter size while increasing BL 22% over conventional designs (Patent Pending)
    • Vented Inner Motor System The chamber under the tweeter dome is vented to the perimeter of the voice coil with machined channels in the motor structure to minimize dome distortion
    • Sealed and Tuned Tweeter Enclosure Provides awesome control as well as smooth and extended upper mid/lower tweeter response from driver
    • Foam Dispersion and Control Plug Used behind tweeter dome to control reflected energy and balance air pressure to the tweeter dome. Increases overall dome strength while in operation
    • Copper Clad Aluminum Voice Coil Increases efficiency and thermal dissipation (power handling) of the tweeter
  • MIDRANGE
    • Tri-Tech™ Cone with Röhm Rohacell® Foam Sandwhiched cone material of foam, poly and woven carbon fiber. Provides a very light yet very strong cone for extended frequency response and superior cone control over the midrange’s entire operating range
    • T-cut Top Plate with Micro Plate™ Copper Cap Provides very linear and extended midrange response as well as increased efficiency and thermal dissipation (power handling). Micro Plate™ copper shorting cap reduces THD
    • Edgewound Copper Clad Aluminum Ribbon Voice Coil Very efficient coil design that provides high coil winding density and increases thermal transfer from voice coil to the motor structure for higher power handling and decreased power compression
    • Balanced Coil Construction The voice coil diameter and mass are engineered specifically to work with the driver system and provide an extremely linear and balanced response
    • Variable Surround Thickness The surround thickness varies across its cross section to provide higher linearity and balance of the driver system, especially at higher excursions, when compared to conventional surround designs.
    • Z-Wave™ Spider Design New spider design incorporating two complimentary shaped waves which provides better control over non-linear motion in the driver system. (Patent Pending)
  • Come in a protective case surrounded by blow-molded foam
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossovers

Product history:

Kicker 41QSS654 thumbnail
(newest, current model)
Kicker QS65.2 thumbnail
(previous model, replaced by Kicker 41QSS654 (QSS654))
Kicker 04SS652 thumbnail
(previous model, replaced by Kicker 09QS65.2 (QS65.2))

Specifications & Details


Speaker Specifications
Speaker Size
6-1/2"
Design
2-way Component System
Peak Power Handling
200 watts
RMS Power Handling
100 watts
Sensitivity
87 dB
Frequency Response
40 - 22000 Hz
Impedance (Per Voice Coil)
3 ohms
Top-Mount Depth (Mounting Depth)
2-13/16"
Cutout Dimensions
5-7/16"
Warranty and Return Policy

Item Details


Manufacturer:

Model Number:

04SS652

Weight:

19.00lbs

Internal SKU:

04ss652

Internal Product ID:

3848

Customer Ratings & Reviews



5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
5
Value
4
Features
5
Design
5
Usability
5

Customer Reviews

Sort by:

Loading...

One of the best sounding componet sets i have heard

This is One of the best sounding component sets i have heard. There not cheap by any means but are definitely worth it. Handle power nice, very clean sounding while still getting loud.

By Corey on July 12, 2007

11

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX VSP65KIT

• 375 watts Peak Each, 125 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
• Mounting Depth: 2.51"

(76)

$109.99

DS18 DX2

• 460 watts Max Each, 230 watts RMS Each
• 1.18" Silk Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohms
• Sensitivity: 89 dB
• Mounting Depth: 2.85

(1)

$424.96

Rockford Fosgate Power T2652-S

• 200 watts Peak Each, 100 watts RMS Each
• 1" Aluminum Dome Tweeters with integral suspension
• Carbon Fiber & polypropylene injection molded cone material
• Impedance: 4 ohms
• Sensitivity: 89 dB

(37)

$329.99

Related Searches


Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon