Garage
Shop

Alpine PDX-4.100

4-Channel Power Density Digital Amplifier (PDX4.100)

Alpine
Shop all Alpine
Product videos
highlight-star-icon

4-Channel Power Density Digital Amplifier • 100W x 4 chan. @ 4 Ohms • class D amp design • stackable installation design • MOSFET power supply • quick connect power connectors

Learn more about the pdx4100

We apologize

This item has been discontinued

Product Highlights


4-Channel Power Density Digital Amplifier • 100W x 4 chan. @ 4 Ohms • class D amp design • stackable installation design • MOSFET power supply • quick connect power connectors

Description


Alpine brand icon

Authorized dealer

  • 4-Channel Power Density Digital Amplifier
  • RMS Power Rating:
    • 4 ohms: 100 watts x 4 chan.
    • 2 ohms: 100 watts x 4 chan.
    • 4 ohms bridged: 200 watts x 2 chan.
  • Class D amplifier design
  • Stackable installation design with front-panel controls
  • Quick-connect speaker connectors
  • HP/LP Crossover: 30 Hz - 400 Hz, 12dB/oct.
  • CEA-2006 Compliant
  • MOSFET power supply
  • Stackable installation design with front-panel controls
  • Continuously adjustable gain control
  • Top mounted blue LED power/status indicator
  • 4-Layer glass epoxy PC board
  • Dimensions: 7-9/16"L x 10-1/8"W x 2-7/16"H
  • 1-year SonicElectronix.com warranty

Alpine products are warranted solely by Sonic Electronix, Inc. under the same period and terms as the original Alpine warranty. Sonic Electronix is not an Authorized Alpine Dealer and Alpine requires all merchandise purchased by Sonic Electronix customers to be returned solely to Sonic Electronix. Alpine products are also covered by our Standard Return Policy for returns on exchanges or refunds within 30 days from the date of purchase.

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
100 watts x 4 channel
RMS Power @ 2 ohms
100 watts x 4 channel
RMS Power @ 1 ohm
Not Stable
Bridged RMS Power
200 watts x 2 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
4-Channel
Total RMS Power Output
400 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
1%
Speaker Level Inputs
Yes
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
30 - 400 Hz
Low-Pass Crossover Frequency
30 - 400 Hz
Signal-to-Noise Ratio
76 dB
Remote bass/level controller
No
Fuse Rating
30A x 2 
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

PDX-4.100

Weight:

10.00lbs

Internal SKU:

pdx4100

Internal Product ID:

9219

Product and How-to Videos


Customer Ratings & Reviews



5 star
70%
4 star
30%
3 star
0%
2 star
0%
1 star
0%



Durability
4.6
Value
4.5
Features
4.3
Design
4.6
Usability
4.4

Customer Reviews

Sort by:

Loading...

Really impressed!

I had this amp (still do just not hooked up) in an 85 prelude on a set of 6.5 type-r coaxials and a set of 5.25 type-r components, and it performed awesomely! Rated at 150 rms @ 4ohms per channel, I believe you cannott get a better amp!

Though it doesn't have any preouts, you don't really need any because most subwoofer amps have them and that's what it should be connected to! Love the stackability and self-polarizing quick connects! Only hang up is the adjustments are not readily accessible because of the cover plate.... but you should only have to set your amp once!

By Trae on January 10, 2009

14

found this helpful.

Nice amp

I have had this amp for a while now. Originally I had some issues with it shutting down into a protection mode. I never really figured out what was causing this. I asked around, had others look at it, no one could figure it out for sure.

After messing around with it enough I found that adjusting the gain so my max playing volume was at a lower volume setting on my head unit seemed to fix the issue entirely.

I do not think the amp was faulty and am certain it was not an overheating issue. I have used many different amps in the same configuration and have only had this issue with both of the Alpine amps I have used.

Aside from that issue it has been a nice amp. The small size is great, and the stacking would be great for tight space installs. I really like the polarized quick connects for the speaker outputs as well.

By john on September 4, 2009

13

found this helpful.

Quality Amp

As title says, its a quality amp, with great looks! i have a concealed install on my FJ Cruiser, so looks do not matter so much, but i love how its made, the ease of install and option of being stack-able.

By Geroy on May 27, 2010

11

found this helpful.

Best amp you can buy for your highs and mids

I have this amp running 2 type S 6.5's in the front and 2 type r 6.5's in the rear doors and they sound crystal clear... The main reason to buy this amp is because it's class d which means it's more efficient and gives your vehicle's electrical system less strain while supplying more power to your speakers. No brainer purchase.

By C-Willy on December 16, 2009

12

found this helpful.

Great Amp

I bought this amp in December and its powering 4 infinity 692.9i 6x9s and 2 39.2cf 31/2s. Ive had it on full range and get incredible sound reproduction. Ive have had it on high pass as well with the recent addition of my alpine mrpm500 and ppi pcx 124 single 12" and the highs are incredible. I own a 06 charger and I mounted the pdx4.100 upside down in the rear deck 8" sub cut out and it looks perfectly at home there. Awesome amp, definitely worth the money. Even in the Florida heat, in a trunk it still powers everything great.

By T on May 24, 2010

10

found this helpful.

Small size big power

Nice little power package. Working great.

By Simo on April 13, 2009

11

found this helpful.

Nice amp tiny, great sound low on features

Nice amp, good sound quality, but no pre-output, and lacks features found on similar priced amps. Also cheap plastic on sides, and caps are also plastic.

By Kaushal on July 17, 2007

11

found this helpful.

Great Amp!

Good, clean sounding, amp. Recommend.

By Tooque on February 14, 2010

9

found this helpful.

Great Amp, Nice compact design

This Amp not only looks good and is discreetly compact, but it produces some awesome results. I hooked this up to some Alpine components it it sounds amazing. I definitely recommend this amp to anyone looking for something to push 2 sets of Alpine SPX-REF components, since that is what I have.

The only down side IF I had to pick one would be accessing the gains. There is a door that you have to remove in order to get to them, and you have to use the right size Allen wrench in order to remove the door.

By Jeffrey on July 10, 2008

9

found this helpful.

great amp

I search around for months, talked to dozens of people, and looked hundreds of amps...and this is the 2nd best amp I've found, the only amp that takes this amp down is the MTX Thunder Elite 1004, and the 604 elite is the equiv of this amp.

this amp, i got it last week, hooked it up a few days ago, even though i was still waiting for some more parts, new speakers primarily, but i hooked it up anyhow and tweaked around with it to see what it could do on my old speakers and with in the first day..it completely blew my rare speakers :-s

the rating on this amp is amazing, 150 is the nominal RMS, i had it only about 60% on the gains when the old speakers blew, and only about 50% on the head unit. the sheet that came with them, stated 180 watts RMS at 4 ohm, was tested stable back when it was packaged. mine was packaged almost 2 years ago, but none the less, damn good amp.

keep in mind that the possible peaks per channel can reach as high as 216 watts. At 60 amps at 14.4 volts. You'll be hard pressed to find a better amp, and the 2 ohm 4 ohm ratings are amazing, the ONLY amp on the market that even offers that, and in such a small footprint.

I took off some because I felt there could of been more tweaking on the knobs that could have been added, granted the head unit will do most of that in my set up, but a 3-band equalizer will really not do this justice. the lay out of the inputs is designed not for just speakers but for any set up, so keep in mind your wired and what they are when you install them, they are marked as channels, not rear front, left and right as normal 4 channels are.. I managed to mix up all my channels and have a hell of a time figuring them out :P

By Ray on April 20, 2010

9

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX VAD10004

• 150 watts x 4 channel @ 4 ohms
• 250 watts x 4 channel @ 2 ohms
• Bridged: 500 watts x 2 channel @ 4 ohms
• Total RMS Power: 1000 watts
• CEA-2006 Compliant
• Class D 2 ohms Stable 4-Channel-Channel Amplifier

(14)

$279.99

JL Audio XD400/4v2

• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier

(9)

$349.99

JL Audio JD400/4

• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier

(14)

$279.99

Taramps DS 1200X4

• 192 watts x 4 channel @ 4 ohms
• 300 watts x 4 channel @ 2 ohms
• Bridged: 600 watts x 2 channel @ 4 ohms
• Total RMS Power: 1200 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier

(2)

$204.99

NVX VADM4

• 400 Watt True RMS Output!
• Marine Certified 4-Channel Micro Class D Amplifier
• 75W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/2 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!

(31)

$189.99

Related Searches


PDX-4.100 small

Item added to your cart.

Price: $349.99

Essential add-ons
Belva BAK44BL

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$79.99

$39.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
4 inputs / 4 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC44X helps you easily integrate with your factory or aftermarket system

$149.99

$64.99

Add to cart
NVX XIX45 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

$44.99

$20.99

Add to cart
NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

$32.99

$15.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon