Expert Service 1-661-257-9993 [Hours]

Eclipse SW6010

10" Dual 4 ohm SW6200 Series Subwoofer

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

Eclipse SW6010

10" Dual 4 ohm SW6200 Series Subwoofer

$99.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$10.99
Add Warranty
3 years of protection

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Eclipse SW6010.

Get FAST answers from customers ASK a Question See questions answers

  • 10" Dual 4 Ohm SW 6200 Series Subwoofer
  • Power Handling:
    • Peak: 1300 watts
    • RMS: 450 watts
  • Impedance: Dual 4 ohm
  • Kevlar-aluminum composite cone woofer
  • Santoprene surround
  • ABS + 15% Fiber filled construction
  • Rubber gasket
  • Flat PC spider
  • Four 10-gauge chrome terminals (2 pairs)
  • Air vent cooling system
  • 4-Layer dual 4 ohm aluminum voice coil
  • 30oz. Ferrite magnet
  • Sensitivity: 88 dB
  • 1-year SonicElectronix.com warranty

Product History:

Eclipse SW6010 thumbnail
(newest, current model)
Eclipse SW6000 thumbnail
(previous model, replaced by Eclipse SW6010)

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1300 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
450 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 500 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
88 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
12 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Silver
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Kevlar-Aluminum Composite
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5-30/32"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-5/32"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
71%
4 Star
14%
3 Star
14%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.6
Value
4.7
Features
4.6
Design
4.8
Usability
4.8
ChristopherW.

Lagrange, GA

Overall
Durability
Value
Features
Design
Usability
Great bang for the buck!

October 14, 2011

Very responsive and clean bass. Handled 500 rms no problem. Works great in a ported box to spec. Not to mention it looks great.

8 of 9 found this helpful

Was this review helpful to you?

lautsprecher

Salt Lake, Ut

Overall
Durability
Value
Features
Design
Usability
Great Value

July 6, 2010

I have one of these in a custom ported enclosure tuned to 24hz for my GMC 2500 Crew Cab, and it hits deeper than any 10 I have heard! Even ported, it stays tight and accurate, and goes as loud as I need it to. I haven't metered it yet, but I am guessing that I can achieve well over 100db at nearly any audible frequency, which obviously isn't competition level, but is impressive for a single 10! I am running it off of a Hitron amp from here with a claimed 600 watt rms, and they seem well mated. I would highly recommend this sub for the price, or even triple the price.

8 of 9 found this helpful

Was this review helpful to you?

van

Baltimore,Md

Overall
Durability
Value
Features
Design
Usability
Eclipse SW6010

April 17, 2011

I have one of these in a small sealed box 0.65 and running it with a Kicker zx 500.1 ran off an eclipse cd7200 mkII and it is the cleanest and best sound I have ever got out of any subs I have owned or heard that my friends have had not the loudest but if you truly enjoy a wide selection of different types of music you want it all to sound great. If all you listen to is rap and electronic then you may want to build a system that tailored to that type of music.I myself listen to everything from classical to rap to metal to electronic and this sub has great SQ for all.

7 of 8 found this helpful

Was this review helpful to you?

vann

Baltimore,md

Overall
Durability
Value
Features
Design
Usability
best subs for sound quality . good spl

July 8, 2010

best subs for sound quality if your #1 concern is SQ and you actually want to hear the mids and highs blend together seamlessly then this is the sub for you . if you want super high spl's and to blow the doors off your car then get a square kicker but I want my music to sound good in my car not to be heard 5 blocks away.

7 of 8 found this helpful

Was this review helpful to you?

Nicholas

Henderson, NV

Overall
Durability
Value
Features
Design
Usability
This sub really hits!

February 12, 2010

I have this sub bridged on a Eclipse EA4200 and it sounds absolutely incredible! More bass than I would have ever expected and hits cleanly on all types of music. I recommend getting this well under priced sub if you are looking for a nice 10" for not too much money.

7 of 8 found this helpful

Was this review helpful to you?

Robert

Canada

Overall
Durability
Value
Features
Design
Usability
450 rms?

January 1, 2011

these subs cannot handle true 450 watts rms. maybe 300?they have an ok sound though. on some rap notes they would not even hit the notes,and ya it wasnt because of my amp. i installed vega vmax subs after and wow. i would not recommend them to anyone looking for a 450 watt rms sub. not what i expected.
as for sonic,you couldnt shop at a better place!amazing service and prices!

6 of 8 found this helpful

Was this review helpful to you?

Valter

Centreville, VA

Overall
Durability
Value
Features
Design
Usability
Eclipse SW6010

November 29, 2010

The subwoofer blew after 2 months of normal use. while it was working, it was a decent speaker, but after it blew...now its just a cat toy. (in the box)

5 of 6 found this helpful

Was this review helpful to you?

patrick

north carolina

Overall
Durability
Value
Features
Design
Usability
eclipse sw6010

November 3, 2010

great sub in my s2000...it works magic wonders with my bass...ive got 1500 watts on it and i have the gain up 3/4 of the way...clean deep bass...this sub is for those people that want bass but not so much that ur brain shakes...it travels far as well

5 of 6 found this helpful

Was this review helpful to you?

ChristopherW.

Lagrange, Ga

Overall
Durability
Value
Features
Design
Usability
Great bang for the buck!

August 4, 2010

Smooth response and quick recovery. Can handle its full RMS wattage rating and then some. Not quite audiophile but close. i would definitely recommend! Note: sounds best in ported enclosure.

5 of 6 found this helpful

Was this review helpful to you?

Joe

Queens, new york

Overall
Durability
Value
Features
Design
Usability
Amazing

June 30, 2010

I have this sub and it pounds like crazy I'm using an mtx amp and pushing 700 watts rms into them and they pound very reliable and powerful deep and amazing I will use them as infinite baffle soon.

6 of 8 found this helpful

Was this review helpful to you?

GRW

Dallas,Texas

Overall
Durability
Value
Features
Design
Usability
Excellent Sub!! Outperforms higher priced subs!! Blows all the other subs away.

January 2, 2010

I have been an purchaser of high end car audio components for a long time. After almost thirty years of putting or having others put aftermarket stereos, amps, and higher quality speakers in my cars, I believe I have a feel for what is good and not good. I have always leaned towards the higher quality components. I can report that this Eclipse SW 6010 Sub passed all my tests. The basket is durable; the speaker is heavy, as expected but it feels solid as you lift it out of the box. The aluminum cone adds to the solid nature of the sub and offers more protection to the rigors of its life after installation. Connections were easy with the mounting lugs on the side.

The two subs are mounted in a PROBOX under the back seats of my 4-door truck; the box is down firing. I know they will be even more efficient if I spent time to build a better box, however with the time and money I invested in this install it all worked out perfect. I have it hooked up to a Alpine PDX-1000.1 mono-block. It plays loud although it is not the loudest (I am too old to break windows). It plays very clean and tight. There is no muddyness; each note hits extremely hard without distorting or hiss. It reproduces the exact note that the composer/artist intends. For that reason, I can play All types of Rock, R &B, Rap, Country or Classical music without changing my settings too much.

Consequently, I have turned down my sub output to less than 50% gain and it still shakes my Silverado 1500 Crew cab at one half volume. Turning it up beats in the back of my head and administers to me and my riders CPR.

Because of my history with MB Quart. MTX, Kicker, Orion, JL Audio and a few others, also ran's, I can say with confidence that these will not disappoint!! They work as well as the High end JL Audio 10" that I had in my last vehicle. Matching them to the proper size box or getting one built is key but once they are set in the proper hole --> they will perform beyond the expectation of a 800-1000W sub. Forget the Sony, Kenwood, Pioneer, JVC or the other commercial crap that is sold in Target . . . they can't strike a match . . . much less hold a candle to these subs.

5 of 6 found this helpful

Was this review helpful to you?

Joon

Orlando, FL

Overall
Durability
Value
Features
Design
Usability
Wow... it's just wow.

March 19, 2010

Wow, I used to use JL Audio W3, and I ended up purchasing 2 of these, and oh man... nice and clean... even in lower volume. Very very solid and clean base all over frequency and watts. Very impressive.. because I thought only high-end brands like JL Audio can generate nice & solid sounds, but I guess I was wrong.. these are very very well constructed subs all around. You'll be very x 10 happy with these.

4 of 5 found this helpful

Was this review helpful to you?

Tub

Saint Paul, Minnesota

Overall
Durability
Value
Features
Design
Usability
Eclpise SW6010

March 25, 2010

Love this sub 450 rms is good enough unless your looking for something a little bigger this sub is one of the best I own can't beat the price soon to be powered by a Hitron 1000.1 amp can't wait to test the full potential of the subwoofer but I think i'll break-in the sub a little more first don't know if its a myth but I rather be on the safe side overall love it if your looking for a subwoofer that sound and pound good with a great price you can't beat I would recommend the Eclpise SW6010!!!!!

3 of 4 found this helpful

Was this review helpful to you?

ernie

san pedro

Overall
Durability
Value
Features
Design
Usability
good sq not spl

June 18, 2011

Blew this sub with a 500 watt Kenwood amp, as you know Kenwood amps don't give a true rating as the box says, so this sub definitely is weak.

However the sub sounded pretty good for the time I had it, just don't push it hard and it won't blow.. I was EQing the sub so it was getting real low and hitting high, and it did a great job but my amp couldn't keep up.
Now I have a 800W Infinity Kappa one amp and the sub was already rattling from before and it finally gave up and started to burn the Voice coils

3 of 5 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $37.85

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $53.99

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $64.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $16.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $3.44

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 Eclipse SW6010 Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 Eclipse SW6010 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 Eclipse SW6010 Subwoofers

Mono Amp

4 Channel Amp

4 Eclipse SW6010 Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

SW6010

UPC

873549001216

Weight

20.00lbs

Internal SKU

sw6010

Internal Product ID

11725

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Eclipse SW6010