Install a New Car Stereo and Retain Factory Amplifier in select 1999-2007 vehicles from Toyota, Lexus
Product highlights
• Wiring harness for select 1999-2007 vehicles from Toyota, Lexus
• Retains factory analog amplifier and speakers
• Plugs into the car's stereo connectors on one side
• Color-coded wires, no wire cutting needed
Install a new car radio faster with this wiring harness that plugs right into the vehicle's connectors, allowing you to hook up the radio into the vehicle's electrical system. On one side, the wiring harness is color-coded with wires that you'll connect or solder into the aftermarket radio/receiver. The other side has a vehicle-specific adapter that connects directly into the original radio connectors for a quicker installation without having to cut each of the wires.
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Best selling similar products
iDataLink Maestro RR Interface Module
• Universal stereo replacement interface module
• Connects to iDataLink-compatible stereos
• Retains SWC, voice commands, etc.
• Enhances multimedia experiences with exclusive gauges, vehicle info, parking assistance, climate control, and radar detection
(36)
$189.99
List price $229.99
• Direct connection to the factory radio harness
• Color coded wires for easy installation
• No cutting or splicing required
(97)
$5.99
List price $6.99
Crux DKGM-49 Stereo Replacement Interface
• Stereo Replacement Interface with Dash Kit
• Fits select 2006-2020 vehicles from GMC, Chevrolet, Buick Vehicles
• Accommodates ISO Double DIN Mount
• Retain steering wheel controls and chime functions
(41)
$129.60
List price $201.60
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(51)
$12.99
List price $6.99
• Direct connection to the factory harness
• Designed for select Pioneer stereos
• Color coded wires for easy installation
• No cutting, splicing, and hardwiring required
$16.99
List price $18.99
• Provides 12-Volt accessory power (RAP)
• Designed for non-amplified and amplified models
• Retains balance and fade
• Pre-wired for steering wheel audio controls
(25)
$99.99
List price $299.00
iDataLink Maestro RR2 Interface Module
• Advance stereo replacement interface for select vehicles
• Offers exclusive infotainment retention
• Adds support for additional vehicles
• Enables Bluetooth programming directly from mobile device
• Retains OnStar, SYNC, Uconnect, and more
(5)
$259.99
List price $319.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(56)
$9.95
List price $6.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(63)
$9.95
List price $6.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(246)
$7.95
List price $8.99
Manufacturer:
Model Number:
70-8113
Weight:
0.14lbs
Internal SKU:
met-708113
Internal Product ID:
12708
| 5 star |
|
69% |
| 4 star |
|
19% |
| 3 star |
|
12% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Good Choice
This product really satisfied mi needs. I recommended. Good option.
47 found this helpful
Tundra/Sony interface
Not quite accurate/complete on the wiring diagram for the 2002 Tundra with an amp, but I figured it out using a multi-meter to test the leads. Once it was done, never a problem.
46 found this helpful
Just ok
I purchased the Metra 70-8113 mainly for the big screen and bluetooth abilities. After installing it in my pick-up I was a bit disappointed with its abilities as a stereo. The tuner output is a bit weak and the output levels are not equal when it applies to the stereo and USB and Bluetooth. I should have picked another unit.
44 found this helpful
Don't do without it!
A bit of time is needed to sort out all the wires - make sure you look at what's behind the dash! I soldered the wires to the pre-amp outputs so I know they will never work loose. After that it just plugs right into the connectors in the car! Just make sure it's the right one for your car - call Sonix if you don't know - they are pretty helpful!
42 found this helpful
Fits 2010 Prius
I installed a Pioneer AVH-P3200-DVD stereo in my 2010 Prius , This metra cable fits perfect , I also installed Four New Pioneer 4-Way Speakers , So i did not use amp plugs. I removed Factory JBL head unit. This product makes install easier. But more wiring harnesses would make job easier. Need cable for backup camera that I found not available. I wired camera wire by wire,Toyota Camera works good on Pioneer head unit. I would purchase Metra products again, tech. support very helpful.
42 found this helpful
No Need to Bypass Factory Amp
This item works great on Toyotas with JBL Factory Amps. I've used this part in two installs. One in a 2004 Camry and a 2001 Land Cruiser. Like the title says, no need to bypass the factory amplifier. Before, you had to locate the amp and use a Bypass connector. The amp could be located in odd places in the car.
40 found this helpful
Great Product!!
I love the way these adaptors work. You simply solder the adaptor to the deck harness and then open your dash up and plug everything in. Doing all the soldering on the work bench in the shop is much better then in the vehicle. Great product and you can’t beat Sonic’s price.
41 found this helpful
Fits 2010 Prius
I installed a Pioneer AVH-P3200-DVD stereo in my 2010 Prius , This Metra cable fits perfect , I also installed Four New Pioneer 4-Way Speakers , So i did not use amp plugs. I removed Factory JBL head unit. This product makes install easier. But more wiring harnesses would make job easier. Need cable for backup camera that i found not available. I wired camera wire by wire,Toyota Camera works good on Pioneer head unit. I would purchase Metra products again, tech. support very helpful.
40 found this helpful
Correct pins for '05 Camry XLE (with JBL amp).
Used with Pioneer DEH-X4600BT. Wiring was dead-simple with the Pioneer connector. Even the colors match up. Solder, heat-shrink, install.
38 found this helpful
Great features
This stereo is loaded with features for the same price as similar brands costing 50% more.
39 found this helpful
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
