Power Acoustik's BAMF amplifier series is the perfect amplifier for those that are looking for quality performance, while wanting to save some cash. Each amplifier in the BAMF series feature a die-cast aluminum heat sink that dissipates heat from three sides of the amplifier. For convenience, all the connections and control functions can be found on one side of the amplifier.
- BAMF Series Monoblock Class D Car Amplifier
- RMS Power Rating:
- 4 ohms: 600 watts x 1 chan.
- 2 ohms: 900 watts x 1 chan.
- 1 ohms: 1200 watts x 1 chan.
- Max power output: 2000 watts x 1 chan.
- Fully Regulated PWM power supply
- Wired remote bass level control included
- Power and Protection LED power indicators
- Adjustable Tuned Bass EQ (0-18 dB Bass Boost)
- Hi Speed Digital Circuitry
- Full Selectable Crossover (HI,Full,Low)
- Four-way protection circuit
- 1-Ohm Stable
- System Distress Indicator
- Die-cast aluminum heat sink designed for massive heat dissipation from three sides of the amplifier
- Platinum RCA level inputs
- Platinum screw terminals
- Variable low-pass filter (40-200 Hz, 12 dB/octave)
- Variable Subsonic Filter (20-50 Hz)
- Variable Subwoofer EQ @ 45 Hz
- Signal to Noise Ratio: 100 dB
- Frequency response: 20-200 Hz
- Dimensions: 11-3/8"D x 8-1/4"W x 2-1/8"H
- 4/8 gauge power and ground wiring is required and recommended for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- Authorized Internet Dealer
- 2-year Manufacturer's warranty
|
Average Customer Rating is 4.6 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.6 |
| Value | | 4.8 |
| Features | | 4.5 |
| Design | | 4.6 |
| Usability | | 4.7 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
Marcus from Milwaukee, WI
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Got this thing powering two alpine type r10's wired down to 1ohm. Everywhere i go people think that i have 12's. Great way to get top quality bass at a fraction of the cost. The only thing i dislike is the extremely annoying blue light from the bass knob
|
|
Review by
ferg from plaquemine la
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
had this amp on 2 kicker comp 15s wired at 2 ohms and it pushed them to the max it did a lot better than my old crunch 1500
|
|
Review by
Trey from Tacoma, WA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Read prior reviews on Power Acoustik amps saying they overheated and such. Decided to give this one a go for my 3 10" Pioneers. This amp is great! Doesn't even get warm after a long session of loud bass. Good buy for a great price.
|
|
Review by
Scott from Lewisville, TX
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This is a decent amp. But for its quality, it should be a smidge cheaper.
Pros:
* Very small
* Large heat sync
* Decent power output for OK but not great systems.
Cons:
* Confusing bass knob functionality. The manual says its a gain control (as opposed to a bass boost control) but I can't figure out how that relates to the gain control on the amp. They both still function.
* CUTS OFF ALL THE DARN TIME!
* I cannot keep the amp ON to save my life. If you push the subs at all, the amp just shuts off. I even went so far as to install my own custom fans to cool it thinking it was overheating. But alas, it just cuts out because it's junk.
Overall, if you just want a decent thump and are limited on money and space, this is a good buy. If you are serious about sound quality and durability, look somewhere else.
For the record, I have had this for 4-5 months pushing two Kenwood 12" subs wired down to 2ohms.
|
|
Review by
Dustin from Clinton NC
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I had this amp powering a dc audio level 4 18" and it was knocking.
|
Customer Service
