Expert Service 1-877-289-7664 [Hours]

JL Audio CS112RG-W3v3

1 12" 12W3v3-4 Subwoofers Loaded in a PowerWedge W3v3 Sealed Enclosure with Grille Included

Out of Stock - Backorder
|

List price $439.95

$339.95

with warranty

You Save: $100.00 (22.73%)

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Bundled Savings with this Product

=

25% off an NVX Sound Damping Trunk Kit with Purchase!

With purchase of any NVX subwoofer, you can save 25% on an NVX trunk kit that contains 20 sq. ft. of quality sound dampening material. This material quiets vibrations, stops rattles, and increases the subwoofer SPL.

15.00

16634

4

JL Audio CS112RG-W3v3

$339.95

+

25% OFF

NVX SDTK20

$59.99

Special Price $44.99 ($59.99 if purchased separately)

NVX SDTK20

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

(Offer 1 of 1)

Combined Total Price

$384.94

You Save $15.00

W3v3 Sealed PowerWedge Systems from JL Audio

These JL Audio PowerWedge systems have defined value in engineered low-frequency systems for over ten years. The newest models deliver enhanced power handling and are smaller than previous models, thanks to the W3v3 subwoofer drivers. Built in JL's Miramar, Florida factory, utilizing state-of-the-art CNC woodworking equipment, PowerWedge™ systems feature top-quality MDF construction, steel-mesh grilles, five-way binding post connectors, high-grade automotive carpeting and JL Audio ECS internal wiring.

These compact systems are ideal for a variety of vehicle sizes and deliver tight, powerful bass that will please any audiophile. The rear-firing PowerWedge systems feature an angled back panel to allow the driver to fire toward the back of the vehicle with minimal loss of trunk or hatch space. You will not be disappointed in these Powerwedge systems from JL!

Subwoofer Specifications:

  • 1 12" 12W3v3-4 Subwoofers Loaded in a PowerWedge W3v3 Sealed Enclosure with Grille Included
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 500 watts
  • Final Impedance: 2 ohms
  • Mineral-filled polypropylene upper cone with a metallic JL Audio medallion logo gives the W3's a whole new, classy and sophisticated look
  • NBR (Nitrile Butadiene Rubber) surround
  • DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output
  • Perform outstanding in compact sealed or ported enclosures
  • DMA (Dynamic Motor Analysis) modeling to deliver unsurpassed dynamic stability and low-distortion operation within intended power range
  • Sensitivity: 87 dB
  • Free Air Resonance (Fs): 28.28 Hz
  • Electrical "Q" (Qes): 0.553
  • Mechanical "Q" (Qms): 6.936
  • Total Speaker "Q" (Qts): 0.512
  • Equivalent Compliance (Vas): 2.729 cu. ft (not recommended box size)
  • Xmax Linear Excursion: 0.510 in. / 13.0 mm
  • Driver Displacement: 0.071 cu. ft.
  • 1-year SonicElectronix.com warranty (Subwoofers only)

Enclosure Specifications:

  • PowerWedge W3v3 Sealed Enclosure with Grille Included
  • Sealed, rear-firing
  • Made from high quality MDF construction
  • Steel mesh grille for the ultimate protection
  • Dark gray carpet
  • Weight: 30.4 lbs. (13.8 kg)
  • Dimensions: 11-3/4"D1 x 6-3/4"D2 x 24"W x 14-1/4"H

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
500 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
500 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1000 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
1000 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Mineral-Filled Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Nitrile Butadiene Rubber (NBR)
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
87 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
13 mm

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Sealed
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
1
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Hatchback Style, Angled Back
Height
The height of the item, measured from top to bottom, in inches.
14-1/4"
Width
The width of the item from left to right (side-to-side) measured in inches.
24"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
11-3/4"
Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
6-3/4"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
3/4"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
1
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Binding posts
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Gray
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0

ajb

washington state

Overall
Durability
Value
Features
Design
Usability

No Complaints

October 21, 2012

I purchased this sub as a good compromise between high quality and price. I am very impressed with it. Solid low end and not muddy. After hearing this speaker, I would purchase it again, even if I had more room for a larger cabinet. Great value for the $$$.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Lawrence

Corpus Christi, TX

Overall
Durability
Value
Features
Design
Usability

CS112RG-W3v3 = easy way to add ultra smooth bass

October 10, 2012

I paired this sealed 12" subwoofer and enclosure with a JL XD600/1 for use in my 24' wakeboat this spring. I didn't want the hassle of building a custom enclosure, and I wasn't looking for tons of SPL. I just wanted some nice smooth bass to round out the music coming from the MX650 cockpit speakers. I couldn't be happier with this piece of equipment. It fit perfectly in the helm compartment and was easy to hook-up. The sub puts out way more volume than we need, but every once in a while a good hip-hop track will find its way into the playlist, and I'll crank up the sub to the point where the whole boat is shaking. This really is a well-designed sub and a perfectly matched enclosure that doesn't take up much space. We enjoyed the hell out of it all summer.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Canuck Jay

Lynnwood, WA

Overall
Durability
Value
Features
Design
Usability

Nirvana in a box!

April 11, 2011

Prior to this sub I was running an Rockford Fosgate Punch 1, 12 inch sub in a ported box. It was alright but I found the bass "muddy" and did not suit all kinds of music. A friend who is a diehard JL fan suggested this particular model. Luckily I was able to return the RF sub and bought this from Sonic and received it in 3 days - outstanding customer service and very efficient deliver (free too!). Let's just say once I hooked it up and listened to the first track (Snoop Dogg: What's My Name) I knew I had found the sound I was looking for. Outstanding clarity in highs/low end. Only had the gain on the RF T-500 amp at one third and it was thumping my Xterrra at mid level on the atenuator sub! The unit itself is built beautifully, solid and compact enough to fit in most vehicles. Having it wedge shape makes it convenient to place right up to the back seats of the SUV. I have it tied down with small straps and ratchet to keep it from moving around. I am so impressed with JL Audio, that I'm saving up to replace my front speakers with JL compnents! You know that saying: "you get what you pay for", well, in this case you do, and then some! Thanks Sonic for all your help and offering such a great deal on car audio!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $59.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $12.99

Product Summary

Manufacturer

Model Number

CS112RG-W3v3

UPC

699440931960

Weight

46.20lbs

Internal SKU

cs112rgw3v3

Internal Product ID

16634

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JL Audio CS112RG-W3v3