Brutus: The King of D-Super
When it comes to class D monoblock amplifiers, Brutus amplifiers are truly the king of D class. Brutus BXI amps are considered some of the best amplifiers in the world and the new Super-D Class Brutus amplifiers reinforce that. The D-Class digital chip-set technology produces extremely efficient, low temperature, and a high amplification system resulting in a smooth digital to analog conversion with low distortion. The amplifiers stable at 4, 2, and 1 Ohm(s). All in all, that means that the amp will produce more output with less stress on the car's battery and charging system.
- Brutus BXI Single-Channel Monoblock Super-D Class Car Amplifier
- RMS Power Rating:
- 4 ohms: 650 watts x 1 chan.
- 2 ohms: 1300 watts x 1 chan.
- 1 ohm: 2000 watts x 1 chan.
- MOSFET Power supply
- Super D-Class amplifier relies on a super-speed enhanced chip-set to produce higher current capacities and more precise digital to analog conversions
- Wired remote bass level control included
- Power and Protection LED indicators
- Built-in system diagnostics offer protection of DC, Speaker short, terminal, and overload
- Tuned Bass EQ (0-10 dB bass boost at 45 Hz)
- Dampening factor: >250
- Single-channel monoblock channel operation
- 1-Ohm stable
- Phase shift: 0-180 degrees
- Preamp RCA outputs
- Input level control: 0.04V - 18V
- Balanced line input for MX accessories and line drivers
- Heavy duty aluminum alloy heatsink for extreme heat dissipation
- RCA level inputs
- Screw terminals
- Variable low-pass filter (35-250 Hz, 24 dB/octave)
- Subsonic Filter (15-35 Hz at 24 dB)
- Frequency response: 35-250 Hz
- Dimensions: 15"L x 9-1/2"W x 2-1/2"H
- 1/0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- 1-year SonicElectronix.com warranty
Product History: |  |
| (newest, current model) | |  |
| (previous model, replaced by Hifonics Brutus BRZ2100.1D) | |  |
| (previous model, replaced by Hifonics BXi 2010D) | |  |
| (previous model, replaced by Hifonics BXi 2008D) | |  |
| (previous model, replaced by Hifonics BXi 2006D) |
|
|
Average Customer Rating is 4.8 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.7 |
| Value | | 4.9 |
| Features | | 4.7 |
| Design | | 4.7 |
| Usability | | 4.8 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
Getlow from Boise, id
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Running my fi btl 18 and not a sweat out of it! I'm running a batt and 3.5 farad cap combo to insure full potential. This thing is a beast. I know its an older amp but why get the new model this one is still slappin hard!
|
|
Review by
JAY MOUNG from saginaw,michigan
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
when i get these amp i had it running my hifonics olympus olm2415 it had replaced a borrowed alpine msr-500/1 and the difference in going from that alpine to this hifonics was the bass was some much cleaner and clear...i was running stock alt and batt so i know i wasnt getting no where near the rated output but i noticed that the alpine hit alot harder but this amp was alot cleaner...then i found out 1 of my coils had burnt out so i got a Memphis mojo and this amp with that sub destroy like 3 boxes(1 homemade and 2 prefab vented boxes)...there's nuthin bad i can say about this amp good clean bass reliable never over heats nor cut off make sure you have 1/0 gag and a extra battery to get the true potential of this amp ....SURE THERES BETTER BUT FOR THIS PRICES ITS WORTH IT
|
|
Review by
andrew from sacramento, CA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I bought this amp for my two kicker l5 12s and it puts out a lot of power. This amp also takes a lot of power. I have a 105 amp alternator and a 3 farad cap and it still drops the voltage to 11 something. The subs are able to move the doors about a quarter inch. I have owned this amp for about three months and have never had a problem. even after playing the system at full blast for about a minute the amp is barely warm at all. I highly recommend this amp.
|
|
Review by
Jeremy from Holiday, FL
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I heard some mixed reviews that this amp is overrated. So I took it to a local shop to be tested. At 14.4 volts it was on the money. He dropped it to 13.8 volts & at 4 ohms 634 watts rms, at 2 ohms 1242 watts rms, and at 1 ohm 1896 watts rms. Not bad for a $275 dollar amp. It does its rated at 14.4 which is where they test them. I have mine running 2 Alpine Type R 1022D's @ 2 ohms and they pound...Highly recommend this amp if your on a budget
|
|
Review by
trent from Port Orchard, WA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
have this powering a 12" hifonics olm1612 and its one hellz of a set up
|
Customer Service
