Expert Service 1-877-289-7664 [Hours]

Fall Blow Out Dot Sale

Infinity Reference 3032cf

3.5" 2-way Reference Series Coaxial Car Speakers

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Reference Quality Sound from Infinity

Never has getting high-end sound in your car been easier. The Infinity Reference 3032cf car speakers are the perfect solution to aftermarket speakers. With the 2 ohm voice coil, these speakers are ideal for running directly off of a headunit or for use with a aftermarket amplifier. Infinity engineers have combined the Plus One+ cone with the high roll rubber surround to help retain the integrity of the sound. Get more from your audio system with the Infinity Reference 3032cf.

True Four Ohm Technology

The engineers at Infinity have developed a speaker that works for all applications. The True Four Ohm Technology used in these speakers make it perfect for running directly of a headunit or with an aftermarket headunit and amplifier. All of the speakers in the Infinity Reference line feature a 2 ohm voice coil. However, when you factor in the small OEM speaker wire of most vehicles and the heating in the voice coil during use, the impedance actually seen by the amplifier will increase. Infinity has adjusted the speaker to be safely connected to any headunit.

  • 3-1/2" 2-way Reference Car Speakers
  • Power Handling:
    • Peak: 180 watts per pair / 90 watts each
    • RMS: 50 watts per pair / 25 watts each
  • Plus One+ injection-molded polypropylene (IMPP) woofer cone
  • Hi-roll rubber surround
  • 1" Edge-driven textile balanced dome tweeter
  • 2 ohms impedance
  • True Four Ohm Technology - speaker's 2 ohm impedance combines with OEM speaker wire impedance for a 4 ohm load
  • Frequency response: 85-21,000 Hz
  • Sensitivity: 91 dB
  • Top-mount depth: 1-1/2"
  • Also found as: REF3032CF
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Pair

Product History:

Infinity 3032cf thumbnail
(newest, current model)
Kicker 04VS12L72 thumbnail
(previous model, replaced by Infinity Reference 3032cf)

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
3-1/2"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Balanced Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Textile
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Injection Molded Polypropylene (IMPP)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
75 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
40 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
91 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
81 - 21,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Yes
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
1-1/2"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches, required to contain the speaker.
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
No

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
60%
4 Star
40%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.6
Value
4.5
Features
4.6
Design
4.6
Usability
4.3
Mark

Escondido, CA

Overall
Durability
Value
Features
Design
Usability
Perfect upgrade to factory

September 3, 2013

These are great little speakers that put out clean sound from a factory amp. I used these to replace the factory dash 3.5's in my 2012 Charger. It was like taking cotton out of my ears. The music opened up and the detail was amazing. Install was a snap and despite warnings, which may be outdated or related to earlier Charger models, they fit perfectly. Pro's-install took less than 30 minutes with the Metra harness adapters, Incredible upgrade. Do this if it is all you do to upgrade. Con's-cheaper?

0 of 0 found this helpful

Help our customers find the most helpful reviews

Z

SLC, UT

Overall
Durability
Value
Features
Design
Usability
Great product!

May 21, 2012

I've got a set of these hooked up to a Kenwood KDC-942u head unit (HU), FOR OVER TWO YEARS and I must say that they DEFINITELY add to my system. They're durable and STILL whistle. As long as you have a head unit with a good signal to noise/sensitivity ratio, you'll LOVE the addition of these mids. GREAT PRODUCT!

0 of 0 found this helpful

Help our customers find the most helpful reviews

B.J.

Okmulgee, Oklahoma

Overall
Durability
Value
Features
Design
Usability
Crisp, Clean Highs!!!!!

May 2, 2012

Bought a pair of these to replace my factory speakers in my 1986 SS Monte Carlo. Had to modify the dash speaker covers. These sit higher then the factory ones. Keep that in mind, be sure to check the space available when upgrading your factories. All in all, awesome product!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Esa Spots

Bakersfield, CA

Overall
Durability
Value
Features
Design
Usability
Great Speakers

February 28, 2012

These are great speakers. This is the first time I have ever owned anything from Infinity and so far, I like them a lot. I Replaced my aging PPI 3.5's from way back when and haven't been happier. I totally recommend these.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Simon T

Canada

Overall
Durability
Value
Features
Design
Usability
Suprising!

September 26, 2011

It's very hard to get good sound from a 3.5 inch speaker, so I wasn't expecting much when I auditioned these speakers. Once I heard them though I was sold. A 30 second listen will leave you surprised! Even now they catch me off guard with amazing upper midrange and treble detail. They have also done an amazing job of raising my soundstage. Well done Infinity!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ricky

Griffin, GA

Overall
Durability
Value
Features
Design
Usability
Great Speakers

May 31, 2011

These were ordered as replacement for originals in a 1983 Mustang. Easy fit, but original dash grill had to be removed and recovered as speaker height was about 1/4" too high. Great sound, especially in an old convertible

0 of 0 found this helpful

Help our customers find the most helpful reviews

Xavier

Stockton, CA

Overall
Durability
Value
Features
Design
Usability
Great Additions!

March 29, 2011

These speakers made easy additions to my 97 M3 for upgrades!

0 of 0 found this helpful

Help our customers find the most helpful reviews

BENISASPUD

Provo, UT

Overall
Durability
Value
Features
Design
Usability
Awesome Speakers

December 15, 2010

Great speakers and very quick shipping. I have a show car and these speakers are doing an amazing job and love the crisp clear sound that comes out of them.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Philip

Tarpon Springs, FL

Overall
Durability
Value
Features
Design
Usability
Great Speakers

June 23, 2010

Nice crisp, clear highs. What more could you ask for. Running them off pioneer head unit, plenty of power.

0 of 0 found this helpful

Help our customers find the most helpful reviews

B-Speezy

San Diego, CA

Overall
Durability
Value
Features
Design
Usability
Decent, but be careful

June 23, 2010

I installed these speakers into the dash of my 2006 Scion Xb hoping to get better sound quality. I already had Infinity Reference 6.5" and 5.5" speakers installed in the doors and in the trunk. Once I installed my amplifier and subwoofer, I noticed the speaker could not handle the low frequencies and I would here a pop. I ended up capping the speaker with a 2.2GHz capacitor and now the speaker is a tweeter, but it still sounds pretty good.

0 of 2 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Streetwires 50 ft. of True Spec 16 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $29.99

Belva 23 ft. of True Spec 16 Gauge Speaker Wire

100% Copper Clad Aluminum, PVC blended jacket for easy installation and high strand count for maximum audio quality

Your Price $12.99

16-14 AWG Butt Connectors

These blue butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers!

Your Price $4.99

16-14 AWG Blue T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

16-14 AWG Quick Disconnect Connectors

These blue quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $7.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Items we think you might want
6032cf thumbnail
Infinity Reference 6032cf

• Peak Power: 360W
• RMS Power: 120W
• 1" Edge-Driven Textile Dome Tweeter
• Mounting Depth: 2-1/16"
• Patent Pending Plus One Woofer Cone Delivers Increased Bass and Higher Efficiency
• True 4 Ohms Impedance
• Sensitivity: 93dB

Your Price $52.95

9632cf thumbnail
Infinity Reference 9632cf

• Peak Power: 600W
• RMS Power: 200W
• 1" Edge Driven Pivoting Textile Soft Dome Tweeter
• Mounting Depth: 3-1/16" • Polypropylene Plus One Woofer Cone Maximizes Cone Surface Area
• True 4 Ohms Impedance
• Sensitivity: 94dB

Your Price $74.99

9633cf thumbnail
Infinity Reference 9633cf

• Peak Power: 600W
• RMS Power: 200W
• 1" Edge Driven Pivoting Textile Soft Dome Tweeter
• Mounting Depth: 3-1/16" • Polypropylene Plus One Woofer Cone Maximizes Cone Surface Area
• True 4 Ohms Impedance
• Sensitivity: 94dB

Your Price $84.95

6030cs thumbnail
Infinity Reference 6030cs

• Peak Power: 270W
• RMS Power: 90W
• 1" Edge-Driven Textile Dome Tweeter
• Mounting Depth: 2-1/8"
• Injection Molded Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 93dB

Your Price $104.95

6032si thumbnail
Infinity Reference 6032si

• Peak Power: 300W
• RMS Power: 100W
• 1" Edge-Driven Textile Dome Tweeter
• Mounting Depth: 1-15/16"
• Plus One+ Injection-Molded Polypropylene Cone
• True 4 Ohms Impedance
• Sensitivity: 93dB

Your Price $54.99

6832cf thumbnail
Infinity 6832cf

• Peak Power: 180W
• RMS Power: 60W
• Plus One+ Injection-molded, polypropylene cone woofer
• Hi-roll rubber surround
• 1" UniPivot edge-driven, textile dome tweeter

Your Price $64.95

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

3032cf

UPC

050667110345

Weight

2.20lbs

Internal SKU

3032cf

Internal Product ID

18907

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Infinity Reference 3032cf

  • Harman International: The Pursuit of Great Sound
  • Sonic Electronix: The X Factor when Shopping Electronics