Expert Service 1-877-289-7664 [Hours]

Kicker RS65.2 (09RS65.2)

6.5" 2-Way RS Series Convertible Component / Coaxial Speaker System

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

FREE 20 Ft. Sound Dampening, a $150.00 Value!

Receive a free NVX SDTK20 Trunk Kit - 20 Square Feet of Sound Dampening Material, free with your order! Sound dampening will eliminate rattles, insulate against heat, and also improve the sound and output of your speakers!

59.99

19435

487

Kicker RS65.2 (09RS65.2)

$249.95

+

100% OFF

NVX SDTK20

$59.99

Special Price $0 ($59.99 if purchased separately)

NVX SDTK20

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

FREE NVX 12 ga. Speaker Wire with purchase!

FREE NVX XWS1225 speaker wire with the purchase of select Kicker speakers!

74.99

19435

29

Kicker RS65.2 (09RS65.2)

$249.95

+

100% OFF

NVX XWS1250

$74.99

Special Price $0 ($74.99 if purchased separately)

NVX XWS1250

50 ft. of 12 Gauge EnvyFlex Speaker Wire • Twisted-Pair Technology • Full Spec Wire Is True To Gauge • Flexible and Easy to Install • Silver-Tinned 100% Virgin Copper

(Offer 1 of 2)

Combined Total Price

$249.95

You Save $59.99

  • 6-1/2" RS-Series 2-way Component Speakers System
  • Power Handling:
    • Peak: 400 watts per set / 200 watts each side
    • RMS: 200 watts per set / 100 watts each side
  • Curvilinear polypropylene cone
  • 1" Teteron dome tweeter dome for great off-axis response
  • Ferro-Fluid cooled tweeter voice coil
  • Selectable tweeter attenuation
  • Tweeters can be mounted coaxially
  • Crossover slope (18-high, 12-low dB/Octave 3.5kHz)
  • High frequency output level: 0dB, 3+dB, 6+dB
  • 4 ohms impedance
  • Includes 6" x 8" speaker adapters for greater flexibility
  • Top-mount depth: 2-7/16"
  • Item is a part of Kicker ProFit Group
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

2011 Kicker Authorized Online Dealer and eBay Seller

Product History:

Kicker RS652 thumbnail
(newest, current model)
Kicker 05RS65.2 thumbnail
(previous model, replaced by Kicker RS65.2 (09RS65.2))

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Teteron
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Curvilinear Injection Molded Polypropylene (CIMP)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
200 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
100 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
87 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
40 - 21,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-7/16"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
2-1/2"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches, required to contain the speaker.
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
5-7/16 x 5-7/16 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0

derrick

seffner, FL

Overall
Durability
Value
Features
Design
Usability

great speakers

April 1, 2014

So I've owned the is set in.my first Car and then my knew car came with Bose. I was in sure about doing the rs 6.5 since the Bose sound good. Lol but the rs once installed was much better and a fuller sound. As if your at the concert. Very nice.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jr

Bowie, MD

Overall
Durability
Value
Features
Design
Usability

The RS line

February 21, 2012

Ok after stupidly hitting the back button and closing a lengthy review of these speakers I am going to simplify the post. Ive owned the ds line, ks line, and now the rs line. Im not a kicker fanboy nor do I hate the clearwater company, I've just always found a good value from kicker products when I was purchasing. I am trying to be objective as possible. The midbass is solid, feeling heavy and sporting a silicone covering to prevent water damage. The tweeter is also of a solid feel and with some depth as well. The crossover is made from quality components and can be displayed thanks to the transparent covering. The set was tested from a 50w rms 32bit dsp home stereo source. I tested the set on hip hop first and was amazed by the midbass from the 6.5 and the response range. Put on and No Hands sounded great and the tweeter kept right up with the midbass. Next came some John Mayer, Half of My Heart, which sounded so clean. I had thought the midbass would not be able to play subtle and distinguishable but I was wrong and the tweeter had me thinking I was in the cafe for a live performance. Finally, I played Diary of Jane to see how it would do with a more rock orientated song, and found the best of both worlds. The midbass was punchy and quick while the tweeter never gave me a sign of shrill highs. All in all the RS line is a great speaker, and can be had for a good value from sonic ;). I would gladly purchase these speakers again, if I was not already planning to buy the qs line.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

20 Ft. of 12 Gauge AWG Q-Series Speaker Wire

20 Feet of true gauge Kicker speaker wire.

Your Price $34.95

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $49.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $69.95

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $46.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Speaker Baffles for your Speakers

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $9.99

XTC 6-1/2" Round Large Frame, Shallow Foam Speaker Baffles

Creates a tight seal behind speaker for enhanced audio quality.

Your Price $12.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

RS652

UPC

713034046110

Weight

11.00lbs

Internal SKU

09rs652

Internal Product ID

19435

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker RS65.2 (09RS65.2)

  • Kicker RS Car Speakers
  • Sonic Electronix: The X Factor when Shopping Electronics