Expert Service 1-877-289-7664 [Hours]

Lanzar VW10D

600W 10" Vibe Series Dual 4 ohm Subwoofer

In Stock. Only 3 Left!
|

List price $79.99

$35.95

with warranty

You Save: $44.04 (55.06%)

Arrives by Friday, Sept. 5 to zip 20147

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock. Only 3 Left!

Arrives by Fri, Sept. 5

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

10% Off on the Subwoofer Box!

Save 10% off a 10" sealed subwoofer enclosure with your purchase!

3.50

20412

504

Lanzar VW10D

$35.95

+

10% OFF

Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)

$34.99

Special Price $31.49 ($34.99 if purchased separately)

Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

(Offer 1 of 1)

Combined Total Price

$67.44

You Save $3.50

  • 10" Dual 4 ohm Vibe Series Subwoofer
  • Power Handling:
    • Peak: 1200 watts
    • RMS: 600 watts
  • Black polypropylene cone woofer
  • Treated foam edge suspension
  • Chrome back plate cover
  • Rubber magnet boot cover
  • 2" High temperature dual voice coil
  • 70oz. Magnet structure
  • Frequency response: 50-3500 Hz
  • Sensitivity: 90 dB
  • 1-year Manufacturer's warranty

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Vibe (Lanzar)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1200 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
600 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
50 - 3500 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Treated Foam
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
43%
4 Star
29%
3 Star
14%
2 Star
14%
1 Star
0%

Average Attribution Rating

Durability
3.9
Value
4.6
Features
4.1
Design
4.1
Usability
4.3

Tommy

middle river, MD

Overall
Durability
Value
Features
Design
Usability

Not So Good

November 21, 2011

I bought it and it stoped working after 1 week of what i would call light use.

2 of 2 found this helpful

Help our customers find the most helpful reviews

matt

virginia beach,VA

Overall
Durability
Value
Features
Design
Usability

worth it

April 3, 2014

worth the money spent, wire terminals are pretty poor like other reviews mention, only cause you need an allen key( included) to clamp wires and the markings for pos and neg are painted in the key slot making potential for fading if overused. i listen to a lot of metal music of all sub genres and these hit really hard with breakdown bass drops and double kick blast beats. i occasionally listen to hiphop/rap and dubstep/trance/house music when im in the mood for a little more melodic and rythmic bass and not a wall of sound.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nick

Annandale, VA

Overall
Durability
Value
Features
Design
Usability

Decent

December 4, 2013

I bought two of these originally about a year ago, they worked well and hit very hard at 500w RMS each (both paralleled to 2ohm and then paralleled down to 1ohm on a mono amp) However, about a month ago one of them started rattling as the magnet coil inside started to unravel and then blew one of the voice coils, after that voicecoil blew it caused the second sub to blow one of its own coils. I replaced the originally blown subwoofer and ran it solo at 2ohms for two hours before the coil inside the magnet unraveled on it, not to mention the basket was bent around the lip. I had to return this one (and pay for my own shipping....) and so far the fourth one is working alright, I still have to replace my other with only one working voice coil. Bottom line, when they work they sound great and hit hard, but I would advise warming them up for a bit and not running them full blast immediately out of the box Btw, worst terminal design ever

0 of 0 found this helpful

Help our customers find the most helpful reviews

Briston

westlake, ohio

Overall
Durability
Value
Features
Design
Usability

Great

August 3, 2012

Bought 2 for my box and they hit hard with a 1000 watt amp powering them. They r very good subs A+++.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ace

Tallahassee

Overall
Durability
Value
Features
Design
Usability

Great subs

July 22, 2012

Ordered these subs to add some bass to my system. I was very impressed.

0 of 0 found this helpful

Help our customers find the most helpful reviews

eric

, CA

Overall
Durability
Value
Features
Design
Usability

Lanzar

May 28, 2012

It's a decent subwoofer i had it in a ported 1.35 sqft box and a Rockford fosgate 500-1 amp. I was pushing 500 rms and it handled it. Would probably sound better in a sealed box as the bass lagged. It's not really the max watts it says of course. It's good or the price I would recommend it for starters. The terminals for the coils could have been made simpler too.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Raul

Buda, TX

Overall
Durability
Value
Features
Design
Usability

sub

April 4, 2012

bought this sub for the price, sounds good, i need more power to it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nova

Arlington, TX

Overall
Durability
Value
Features
Design
Usability

Great value

February 13, 2012

These speakers bump!!! Great product at a great price.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Lee

fort lauderdale ,FL

Overall
Durability
Value
Features
Design
Usability

dose the job well

February 11, 2012

I have 3 of these in my 05 pathfinder on a 3000 watt amp and let me tell you hits hard and crisp the top of my truck swells out when the bass hits.

0 of 0 found this helpful

Help our customers find the most helpful reviews

paul

wonderlake, IL

Overall
Durability
Value
Features
Design
Usability

Not reccomended

December 14, 2011

I had purchased this subwoofer along with lanzar 800w amp. After 3 months the voice coil went out and the subwoofer never once did was cranked or anything so it had failed to be a good value.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Anthony

Boston, MA

Overall
Durability
Value
Features
Design
Usability

Good sub.

November 22, 2011

I got this over a week ago and its great. It hits so clean, and shakes everything. I love it. It's so cheap I am thinking about adding 2 more and running 3 10's!

0 of 0 found this helpful

Help our customers find the most helpful reviews

dude

hamilton

Overall
Durability
Value
Features
Design
Usability

great value !

October 25, 2011

Cheap price, good speakers!

0 of 0 found this helpful

Help our customers find the most helpful reviews

tazz

camanche,ia

Overall
Durability
Value
Features
Design
Usability

small sub big sound

October 4, 2011

i had 2 in my 89 S-10 on a 3200 amp people was thanking they was 12s.

0 of 0 found this helpful

Help our customers find the most helpful reviews

steve

memphis

Overall
Durability
Value
Features
Design
Usability

get what you pay for

August 20, 2011

This sub just wasnt up to par with what i expected. probably some of my own fault. it was just a temp sub anyways. Now im building an all kicker system, and of course buying it all through Sonic. Good prices, fast and usually free shipping.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Sam

Earlysville, VA

Overall
Durability
Value
Features
Design
Usability

awesome

July 12, 2011

All i gotta say... 2 of these, on a 2000 watt amp, and 2 of their big daddy 15s on 2 2000 watt amps. amazing.

0 of 0 found this helpful

Help our customers find the most helpful reviews

tazz

oquawka,il

Overall
Durability
Value
Features
Design
Usability

nice subs

March 11, 2011

I got 3 of this subs in my 96 Grand Am. This are nice and loud subs!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Phil

Dallas, TX

Overall
Durability
Value
Features
Design
Usability

Great Product!

November 29, 2010

Loud smooth bass, I was able to put it sideways in my trunk unlike my previous sub (09 Mustang) and it no longer rattles the trunk so all is smooth WORTH BUYING

0 of 0 found this helpful

Help our customers find the most helpful reviews

Steven

Phoenix, AZ

Overall
Durability
Value
Features
Design
Usability

Lanzar VW10D

October 29, 2010

This is a good inexpensive subwoofer. I used one in a large sedan w/ a sealed enclosure. Very Musical!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Dave

Canada

Overall
Durability
Value
Features
Design
Usability

Good Buy!!!

August 19, 2010

This Lanzar sub does pound pretty hard, and it does have extremely good sound. Compared to other subs around this price range, and even one hundred dollars more it beats them all. It does handle high amounts of power for a very long time, I played it loud and hard for over two hours any way.

0 of 0 found this helpful

Help our customers find the most helpful reviews

DAMON

HAMILTON TX

Overall
Durability
Value
Features
Design
Usability

GREAT VALUE

May 24, 2010

I ordered 2 vw10d lanzar speakers and they are dang fine speakers for under a hundred bucks.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil.

Your Price $34.99

Single 10" Sealed MDF Subwoofer Enclosure

10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil.

Your Price $34.99

Single 10" Ported Enclosure Custom Black Baffle

Durable 3/4" Medium Density Fiberboard (MDF) construction.

Your Price $54.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $59.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $109.95

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $69.99

20 oz. Bag of Poly-Fil

Polyester fiber fiberfill adds better bass to your system.

Your Price $5.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $3.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $13.99

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 Lanzar VW10D Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 Lanzar VW10D Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 Lanzar VW10D Subwoofers

Mono Amp

4 Channel Amp

4 Lanzar VW10D Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

VW10D

UPC

068888884983

Weight

9.00lbs

Internal SKU

vw10d

Internal Product ID

20412

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Lanzar VW10D