Install a new car stereo in select 1990-2006 vehicles from BMW, Land Rover
Product highlights
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Best selling similar products
Crux DKGM-49 Stereo Replacement Interface
• Stereo Replacement Interface with Dash Kit
• Fits select 2006-2020 vehicles from GMC, Chevrolet, Buick Vehicles
• Accommodates ISO Double DIN Mount
• Retain steering wheel controls and chime functions
(41)
$129.60
List price $201.60
• Direct connection to the factory radio harness
• Color coded wires for easy installation
• No cutting or splicing required
(97)
$5.99
List price $6.99
iDataLink Maestro RR Interface Module
• Universal stereo replacement interface module
• Connects to iDataLink-compatible stereos
• Retains SWC, voice commands, etc.
• Enhances multimedia experiences with exclusive gauges, vehicle info, parking assistance, climate control, and radar detection
(35)
$189.99
List price $229.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(51)
$12.99
List price $6.99
iDataLink Maestro RR2 Interface Module
• Advance stereo replacement interface for select vehicles
• Offers exclusive infotainment retention
• Adds support for additional vehicles
• Enables Bluetooth programming directly from mobile device
• Retains OnStar, SYNC, Uconnect, and more
(5)
$259.99
List price $319.99
• Direct connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(12)
$152.99
List price $379.00
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(56)
$9.95
List price $6.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(246)
$7.95
List price $8.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(63)
$9.95
List price $6.99
• Provides 12-Volt accessory power (RAP)
• Designed for non-amplified and amplified models
• Retains balance and fade
• Pre-wired for steering wheel audio controls
(25)
$99.99
List price $299.00
Manufacturer:
Model Number:
BW01B
Weight:
0.25lbs
Internal SKU:
bw01b
Internal Product ID:
4425
| 5 star |
|
75% |
| 4 star |
|
17% |
| 3 star |
|
6% |
| 2 star |
|
0% |
| 1 star |
|
3% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Works fine
Easy to splice and follow. Wire colors were clear. Plastic was clean of burrs and fit correctly. No problems with installation.
45 found this helpful
Works great with the stock wiring
Got this for my '98 BMW 328is with the HK system and stock amp. Works just as described and was a quick install. I just shortened the wires since there was a little too much between this and the head units wires. Been working great for a month now.
44 found this helpful
Just Works
Does everything it is supposed to do. Fitting it in my 1995 BMW 318ti was not too bad. I found a place to tuck the harness away to the left side of the head unit.
44 found this helpful
Works great
it really made it easy to install my HU.
41 found this helpful
Easy install
The adapter made installation of my new radio a much easier task. It does make it a little more of a challenge to stuff all the wiring back into the cavity area behind the radio on a '98 bimmer. No cutting of the stock wiring is always a good thing if you can avoid it and this adapter is the trick.
40 found this helpful
order this harness for the kenwood stereo got what i needit right away from sonic
i have to let you people know that i have dealt with the customer service from sonic electronix and they have been more than helpful on getting the questions answered and the merchandise to the customer. very happy with their professionalism and expertise.. keep up the good work.
40 found this helpful
works!
Umm yeah you need this! so get it now!
It works would recommend.
39 found this helpful
Wires in the harness are loose and cause distortion on bumps
The harness fit well to my deck, but the actual wires in the harness are extremely loose, and when i go over a bump, my music cuts off for just a quick moment, i'm attributing it to the loose wires in the harness. They should be quite fixed in the harness and they're not. I would suggest the company to create a more sturdy version
Verified purchase
40 found this helpful
Does the job, if you really need it.
If you might someday reinstall the factory unit back into your BMW then you should use this. Is your particular car so rare, is your new head unit so expensive that you might reinstall the factory unit?
This is a very large connector and is only one half of the connector. It takes up at least two square inches behind your new head unit. Valuable real estate in such a finite area of space.
Am I saying that you might be better off soldering or crimping the wires together? I am, if the first paragraph doesn't apply to your car.
I used it in my car this time and it cost me much time and effort. I will not be using it in my next install though.
38 found this helpful
A must Have
Save your sanity. This is a plug and play after you the connect to your new radio harness.
37 found this helpful
Scosche BOBAZT Stereo Connector Kit
• Designed to connect in-dash receiver wiring harness to vehicle wiring harness
(27)
$9.95
List price $9.95
JL Audio C3-650cw (Sold Individually)
225W 6.5" Evolution C3 Series Convertible Midbass Woofer
(3)
$189.99
List price $189.99
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
