6x9" 3-Way A-Series Coaxial Speakers
• Peak Power: 400W
• RMS Power: 120W
• Soft Dome Tweeter with Wave Guide
• Mounting Depth: 2-7/8" • Multilayer Mica Matrix Woofer Cone
• 4 Ohm Impedance
• Sensitivity: 92dB
• Peak Power: 400W
• RMS Power: 120W
• Soft Dome Tweeter with Wave Guide
• Mounting Depth: 2-7/8" • Multilayer Mica Matrix Woofer Cone
• 4 Ohm Impedance
• Sensitivity: 92dB
The A-Series speakers are your solution to upgrading those worn out factory speakers. The cone is composed of a multilayer mica matrix material that is rigid enough to resist warping during playback, but soft enough to produce smooth and subtle mids. The soft dome tweeter uses Wave Guide technology in order to increase the sensitivity, thus providing great articulation in the high frequency spectrum. The passive crossover network will blend the mid-woofer and tweeter for a perfectly balanced sound all throughout the audible frequency range. These speakers are designed with a wide frequency response to ensure you are hearing every note of your favorite songs. The high temperature voice coil will reduce distortion by dissipating heat quickly, which will protect your investment for years to come. These speakers can be ran off either a head-unit or an amplifier, making them very versatile and applicable for most vehicles. Available in most common sizes, the A-Series speakers make for a great audio upgrade.
 |
||
 SRG6933R |
 TS-A6965R |
|
| 6" x 9" Speaker Size |
 |
|
| 60 watts Power Handling |
|
|
| 3-way Speaker Design |
|
|
| CEA-2031 Speaker Rating |
|
 |
| Frequency Response |
28 - 32000 Hz | 35 - 37000 Hz |
| Tweeter Size |
2.375-inch | 2.25-inch |
| Sale Price |
$44.99 | $54.99 |
Priced Per Pair
|
(newest, current model)
|
|
(previous model, replaced by Pioneer TS-A6966R)
|
|
(previous model, replaced by Pioneer TS-A6965S (TSA6965R))
|
|
(previous model, replaced by Pioneer TS-A6964R)
|
|
(previous model, replaced by Pioneer TS-A6963R)
|
Best selling similar products
• 450 watts Peak Each, 150 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
(40)
$111.96
List price $159.99
• 280 watts Peak Each, 90 watts RMS Each
• Mylar Dome tweeters
• Natural Pulp Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
(13)
$56.99
List price $71.99
• 130 watts Peak Each, 65 watts RMS Each
• 1/2" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(49)
$99.99
List price $99.99
Infinity REF697F (INFSPKRF697FUS)
• 300 watts Peak Each, 100 watts RMS Each
• 1" Textile Edge Driven Dome tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 94 dB
(6)
$111.95
List price $169.95
• 120 watts Peak Each, 60 watts RMS Each
• Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 87.8 dB
(1)
$79.95
List price $89.95
• 450 watts Peak Each, 150 watts RMS Each
• 3/4" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• Mounting Depth: 3.14""
(53)
$89.99
List price $107.99
• 110 watts Peak Each, 55 watts RMS Each
• 1" Magnesium Dome tweeters
• Tunable waveguide tweeter housing
• Pop Paper-Mica Blend cone material
• Curvilinear cone design geometry
• Impedance: 4 ohm
• Sensitivity: 85.5 dB
$152.74
List price $219.99
Rockford Fosgate Punch P1 P1692
• 150 watts Peak Each, 75 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome Tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
(84)
$109.99
List price $109.99
• 375 watts Peak Each, 100 watts RMS Each
• 1-3/16" PEI (Polyetherimide) Dome tweeters
• 2-1/4" PEI (Polyetherimide) Dome midranges
• Woven Aramid Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
$169.99
List price $203.99
Infinity Reference 9633IX (REF9633IXAM)
• 300 watts Peak Each, 100 watts RMS Each
• 1" Textile Edge Driven Dome tweeter
• Textile Semi-Dome super tweeter
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 94 dB
(1)
$109.95
List price $199.95
Manufacturer:
Model Number:
TS-A6965R
Weight:
5.80lbs
Internal SKU:
tsa6965r
Internal Product ID:
63992
| 5 star |
|
80% |
| 4 star |
|
16% |
| 3 star |
|
4% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
look great
My car is still a work in progress. I have yet to install speakers. If you allow me to review in about 3 months I could give a better review. I expect speakers to work great for my application
75 found this helpful
Great price
Love the speakers They sound Great !!!!!!!! Every one buy these..
77 found this helpful
Excellent Speakers, Excellent price
I purchased these for my grand caravan, it took less than 1 hour to install 4 of these. The holes line up perfectly with the factory speakers so no drilling required.
Some web sites say you can't install 6x9 in the front due to depth, but there is more than enough mounting depth for these.
the sound is incredible, even with the factory deck...i can't wait to hear these with the new pioneer head unit i ordered.
i would reccomend these to anyone who want to improve their sound for very little money.
75 found this helpful
good price
arrived fast and i am very satisfied. i need to buy front door speakers from you now.
75 found this helpful
Good speakers
The speakers have excellent sound quality and are well constructed.
75 found this helpful
Great Speakers Very Loud!!
Very good looking speakers good price and great quality. I installed these speakers and they sound soo much better than my old ones and I have them connected to a hifonics amp soo they are extra loud now. I reccomend these speaker if you want to upgrade your sound.
73 found this helpful
Great sound
i have 4 of theese wired in 2 ohm powered by a X200.2 with bass blockers and they are amazing!! very clear no distortion. if you like clearty and loudness this is for you..im running mines as Hi's
71 found this helpful
Pioneer Speakers
Great Speakers; fast shipping. I only wish they would have told me there were connections to hook speakers to factory wiring harness without cutting factory wires. I had to find out from a friend that there were connectors you could purchase to connect to factory wiring without cutting your factory wiring. After purchasing the speakers, I found out Sonic Electronic sells the adapters that plug right into your factory wiring harness. Thanks, other than that, I will purchase again.
70 found this helpful
sound-a-licious
Great price, wonderful site helped me find the exact fit for my vehicle.
Outstanding highs and lows.
Of course Pioneer has been around for many years and still brings the sound to ones ears.
I would recommend this to everyone looking to upgrade from stock speakers.
70 found this helpful
Great value
Great product fast shipping awesome service:) would order again thank you
70 found this helpful
NVX SDBSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(48)
$14.99
List price $18.74
NVX SDBPRO20 20 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
(4)
$109.99
List price $143.99
NVX SDBBP40 36 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
(39)
$114.99
List price $131.99
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
(51)
$39.99
List price $47.99
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(127)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
NVX 25 ft. of True Spec 16 Gauge Speaker Wire
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
(57)
$14.99
List price $29.99
Belva 23 ft. of True Spec 16 Gauge Speaker Wire
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
(20)
$12.99
List price $24.99
Belva BTK106 Trim Panel Remover
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(46)
$14.99
List price $19.99
Belva BTK105 Trim Panel Remover
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(73)
$11.99
List price $18.99
• 130 watts Peak Each, 65 watts RMS Each
• 1/2" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(49)
$99.99
List price $99.99
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
