Expert Service 1-877-289-7664 [Hours]

PAC LP7-2

L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On

In Stock
|

List price $31.95

You Save: $10.00 (31.30%)

Thanks , You Pay:

$21.95

with warranty

+ FREE Shipping in US 48

Order within 8 hrs 49 mins to ship today

Arrives by Wednesday, Aug. 31 to zip 20147

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Wed, Aug. 31

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • PRO Series 2-Channel High Power Line Output Converter
  • Designed to optimize audio levels between radio and amplifier to achieve the best audio quality
  • Ideal use when replacing factory (OEM) radio or amplifier
  • Configurable for speaker level or RCA level input/output
  • Single dial, precision matched stereo, level gain adjustment
  • Signal-sensing circuit for amplifier remote turn-on
  • Surface Mount Construction (SMT) for reliable and noise-free operation
  • Ultra-compact size for greater installation flexibility
  • Also available in 4-Channel
  • 1-year Manufacturer's Warranty

Product History:

PAC LP7-2 thumbnail
(newest, current model)
PAC SOEM-T thumbnail
(previous model, replaced by PAC LP7-2)
PAC SNI-45T thumbnail
(previous model, replaced by PAC SOEM-T)
PAC TRUNK-LOC thumbnail
(previous model, replaced by PAC SNI-45T)

Line-Out Converter Specifications

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Maximum Power Input
This is the maximum amount of power (measured in watts) that the unit is designed to handle. Exceeding this amount can void warranties and damage the unit.
55 watts

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
75%
4 Star
0%
3 Star
13%
2 Star
0%
1 Star
13%

Average Attribution Rating

Durability
4.3
Value
4.4
Features
4.3
Design
4.1
Usability
4.5
isaidme

Waco,Texas

Overall
Durability
Value
Features
Design
Usability
PAC LP7-2

March 14, 2014

Great unit, compact and provides a very good usable signal. I do get a slight turn on pop on occasion but could be install. Would buy again.

52 of 63 found this helpful

Was this review helpful to you?

stevo

Palmdale

Overall
Durability
Value
Features
Design
Usability
pac lp7-2

June 23, 2014

Works great highly recommended, can't beat the price. Cheesy design but most of the time tucked away and won't be seen.

48 of 57 found this helpful

Was this review helpful to you?

Michael

Tremonton, UT

Overall
Durability
Value
Features
Design
Usability
It Works

September 27, 2014

This product works and is easy to wire in, but it really limits your amplifier. This makes your amp get louder by intervals of 10. For example, on the volume level on my radio, 49 is louder than 50, and 49 is equal to 54. It would be better to just put an aftermarket stereo in, it would be louder and clearer.

43 of 51 found this helpful

Was this review helpful to you?

Alvin

Valencia, CA

Overall
Durability
Value
Features
Design
Usability
PAC LP7-2

February 28, 2014

I own a 2011 F150 Lariat with the premium Sony Navigation system. (really nice!!) I had looked all over the internet to research the best way to install an amplifier and subwoofer to the stock stereo. The Sony comes with a factory subwoofer underneath the passenger side rear seat. I walked into sonic, and ran into Allyn. I explained my setup and he pointed me to this product. He explained how it installed, walked me thru the process and even went so far as to print out a wiring diagram of the subwoofer in my truck. I was able to take this home and install this cleanly within an hour. The factory subwoofer comes with a left and right + and - lines.(4 total) The pac tapped into all 4 lines and I was able to piggyback off the amp(12v) to power this unit. Now when I turn on the radio it signals this unit to turn on my amp. No need to run an extra remote wire. After installed I ran my rca's to the amp. This simplified my amp installation and saved me a lot of time by not having to run extra wires. It even has a gain to dial back the amplified signal coming from the stock subwoofer. This allows me to have a cleaner signal to my aftermarket amp. All instructions included are easy to follow. I would absolutely recommend this for anyone trying to upgrade a factory stereo. In addition to the price and customer service, You cant go wrong. My aftermarket Sub and amp sound amazing!! And if I ever want to remove the sub and amp, the factory sub is left untouched and in tact.

44 of 53 found this helpful

Was this review helpful to you?

Luis

Highland, CA

Overall
Durability
Value
Features
Design
Usability
Great product

November 21, 2013

I installed on a 2011 Toyota tundra and works great. No engine noise, just clear sound.

34 of 44 found this helpful

Was this review helpful to you?

Todd

Hurst, TX

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Great Product

August 20, 2016

I have been buying PAC products for a very long time, so I knew it would be a great product. What sold me on this unit was the fact it has the Remote amp turn on integrated into the unit so it makes adding an amp to your stock stereo system a much cleaner installation.

0 of 0 found this helpful

Was this review helpful to you?

SEAN

District heights, MD

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Garbage

April 19, 2016

This thing didn't work at all. I hooked everything up how it was suppose to be hooked up and it sent no signal to my amps. Had it tested at a shop and the reason why it wasn't getting no signal was because the connecter didn't properly fit. No fault of sonic electronix, the manufacturer just dropped the ball on the one I had.

0 of 0 found this helpful

Was this review helpful to you?

Shane

Franklin, LA

Overall
Durability
Value
Features
Design
Usability
PAC LP&-2

February 19, 2016

The unit performs perfect. I like to amp turn on function. The adjustment knob to adjust the sound works well.

0 of 0 found this helpful

Was this review helpful to you?

Browse 4 questions and 17 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Needed to add a sub to my factory radio. Worked great!
Rick C on Oct 11, 2015
I chose this to add a subwoofer in my 2014 Impala while keeping the factory radio.
Landon N on Apr 4, 2015
Your expert recommend this converter
Gerry S on Aug 27, 2015
This item has excellent reviews and sonic electronix has a great price.
Robert C on Mar 18, 2015
Instructions unclear, do I cut the leading RCA wires and then use those wires from the unit TO the speakers (extended with speaker wire). Also, instructions say use the front but would like to tap the rear, will that work? So the blue wire from LP7-2 connects to blue wire from AMP. So the AMP will turn on when the LP7-2 sends a signal from the speaker. Is that how the remote turn on works?
Eric M on Oct 27, 2015
Best Answer: Correct. You cut the rca connectors out and splice each pair (left/right) of wires to those going to your speakers (from the car's head unit).
You can splice into the front or rear speakers. Doesn't matter...but you'll only get whatever signal goes to those speakers. If the fader is pulled to the front and you've spliced into the rear speakers, you'll obviously get no signal.

The blue remote wire will get +12v when the radio is turned on. Connecting it to the turn-on wire at the amp will turn the amp on at the same time. Not sure what color the turn-on wire is on your amp though...so I can't confirm that it's also blue. In my case the amp just has a terminal (screw) and I connected the blue wire to it and everything works as expected.

Hope this helps...
Reply · Report · L S on Oct 29, 2015
· Add Answer · I Have This Question Too (1)
If I am splicing speaker wire, then do I need the RCA inputs shown here on the plug that goes into the LOC? I know that if I splice the speaker wire through the LOC then I need the output side RCA to go to the channel on my amp for my low-level input.
Johnathon V on Mar 30, 2016
Best Answer: Hi yeah you would need rca to get signal to the amp. But sum amps can take a rca splice straight to the amps rca kicker mtx an a few others. I like the pac products for the versatility and if you run ome deck you have a power turn on thats one of the reason i use it an the adjustment. Hope that helps u.
Reply · Report · Marc a on Mar 30, 2016
· Add Answer · I Have This Question Too (0)
iPod direct to amp no head unit. How to provide remote turn on to amp. Also want to assure clean sound via Rca amp input?
Ski P on Jun 29, 2016
Best Answer: First off you don't need the pac lp7-2. You would need this.
http://www.sonicelectronix.com/item_39052_Xscorpion-35R3XL.html
This would plug into the audio jack on your phone, than you would plug the rca end into the amplifier. The remote turn on will come from a wire in the fuse box, that is powered when the ignition switch is in the on position. Hope this helps!!!!!
Reply · Report · Dion A on Jun 30, 2016
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

LP7-2

UPC

606523109451

Weight

0.30lbs

Internal SKU

lp72

Internal Product ID

73785

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: PAC LP7-2