When replacing your factory radio with an after-market car stereo, the Scosche FDK11B wire harness is a must for a quick and clean installation. It eliminates cutting your OE radio plug. After connecting it, your install is simple as the wires will color-match and easily connect to the after-market stereo. Without the Scosche FDK11B, you would have to cut the OE radio plug and manually test each wire to connect to your after-market receiver.
In addition, because you do not have to cut your OE radio plug off, the FDK11B allows you to reinstall your factory receiver if necessary. A great example is if you sold your car, but wanted to keep your after-market radio and re-install your factory stereo receiver. We also recommend the Scosche BOBAZT for a quick connection that is sure to last.
Product Features:
- Harness is used when installing an aftermarket stereo
- Connects the aftermarket stereo harness to the vehicles factory harness
- Designed specifically to fit the compatible vehicles
- Plugs into the factory harness without cutting any wires
- Standard color coded wires provide a consistent and simplified installation
- Made from OEM quality materials
- 23 pin power/speaker connector
- 8 pin subwoofer amp input connector
- Compatible with Select 2004-up Ford, Lincoln and Mercury Vehicles with Premium Sound
Connections:
- Yellow – 12V Constant
- Red – 12V Accessory
- Black - Ground
- Orange – Dash Light Dimmer/Illumination
- Green – Left Rear Speaker (+)
- Green with Black Stripe Left Rear Speaker (-)
- White – Left Front Speaker (+)
- White with Black Stripe – Left Front Speaker (-)
- Purple – Right Rear Speaker (+)
- Purple with Black Stripe – Right Rear Speaker (-)
- Gray – Right Front Speaker (+)
- Gray with Black Stripe – Right Front Speaker (-)
- Blue - Power Antenna
Compatible with the following vehicles:
- Ford:
- 2004-up F-150
- 2005-up Mustang Shaker 1000
- 2005-up Super Duty
- 2006 Explorer
- 2005-up Five Hundred
- 2006 Fusion
- Mercury:
- 2006 Mountaineer w/ Audiophile sound system
- 2005-up Montego w/ Audiophile sound system
- 2006 Milan w/ Audiophile sound system
|
Average Customer Rating is 4.8 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability |
|
4.7 |
| Value |
|
4.8 |
| Features |
|
4.5 |
| Design |
|
4.7 |
| Usability |
|
4.6 |
|
what's this?
|
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
Richard from Garden City, MI
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Made installing an aftermarket radio in my 2008 Mustang GT easier. Just be sure to put a resistor in line with the amp turn on wires to prevent popping.
|
|
Review by
James from Lake Stevens, WA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Directions not very clear, all the wires were not addressed and was not able to utilize all the features of my truck.
|
|
Review by
Cody from Fort Worth, TX
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
very cheap and it make all the wiring very simple. almost a plug and play everything is colored coded. dont attempt if you dont know what your doing
|
|
Review by
nicholas from Columbus, GA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Easy and quick to use except for that extra amp thing.
|
|
Review by
DAMON from HAMILTON, TX
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This made my radio install very easy & was free with my radio purchase.
|
