See all parts that fit your 2000 9-5
1000W Peak 10" TNT Series Single 4-ohm Car Subwoofer
• 1000W Peak
• 300W RMS
• Polypropylene Cone Body
• High Roll Surround
• Spring Loaded Terminals
• Triple Voice Coil Vents
Rockford Fosgate Punch P1V2-25
300W Peak (150W RMS) 2.5" Punch P1 Series 3 Way Coaxial 4-ohm Speakers
$179.99
List price $215.99
720W Peak (240W RMS) 6.75" HED Series 4-ohm 2-Way Component Speaker System
$151.99
List price $227.99
Rockford Fosgate Prime R1675X2
180W Peak (90W RMS) 6.75" Prime Series 2 Way Coaxial 4-ohm Speakers
$79.99
Rockford Fosgate Punch P1V2-675
300W Peak (150W RMS) 6.75" Punch P1 Series 3 Way Coaxial 4-ohm Speakers
$199.99
List price $239.99
Rockford Fosgate Punch P1 P1675
240W Peak (120W RMS) 6.75” Punch Series 3 Way Coaxial 4-ohm Speakers
$109.99
480W Peak (160W RMS) 6.5" S-Series Hi-Res 2-Way Coaxial 4-ohm Car Speakers
$149.95
List price $180.00
60W RMS 2.75" CF Series Custom-Fit Midrange 4-ohm Tweeters
$144.99
List price $169.99
Get a Free roll of Belva 16 Gauge Speaker Wire. Simply click the "Add Both to Cart" button and you will see your savings at checkout. This offer cannot be combined with any other coupons or offers.
Earthquake Sound TNT-10S
100% off
$106 99
$12 99
Priced separately $119 98
Promo Savings of $12 99
Total price:
$106 99
• 1000W Peak
• 300W RMS
• Polypropylene Cone Body
• High Roll Surround
• Spring Loaded Terminals
• Triple Voice Coil Vents
Sonic Electronix is now carrying the Earthquake Sound TNT Series Car Audio Subwoofers. The TNT-10S TNT Series 10" Subwoofer has a peak power rating of 1000 watts and a RMS rating of 300 watts. This sub will produce some earth shaking bass and is constructed with a polypropylene cone body and a high roll foam surround. This woofer is also equipped with 2" single 4 ohm aluminum bobbin voice coil and a 120 oz magnet structure. Add some bumps in your trunk and enhance your cars stereo system with this Earthquake Sound TNT Series Subwoofer.
Best selling similar products
• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.23"
• Sensitivity: 83 dB
$249.99
List price $299.99
• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB
(89)
$139.99
List price $139.99
• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB
(29)
$519.99
List price $519.99
Manufacturer:
Model Number:
TNT-10S
Weight:
10.50lbs
Internal SKU:
tnt10s
Internal Product ID:
38112
| 5 star |
|
60% |
| 4 star |
|
20% |
| 3 star |
|
20% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Pleasantly Surprised!
I had a high end brand 12" sub and had to downsize to a 10" sub due to the trunk size. I was very surprised that it sounded as good as the 12". Great low base response! Would definitely recommend and buy more in the future.
54 found this helpful
Blown after 1 month
I loved how it sounded up till it blew, recomend for a lower wattage amp definatly wouldn't pair it w a JL/250 hard to belive it would blow out w that.
47 found this helpful
Xmax is amazing
This subwoofer has 25mm one way xmax (50.8 mm total), and with 475w rms from the amp, it fills the bottom end nicely. This is the kind of excursion you see on 15's.
It is low sensitivity at 87 db. In the sealed enclosure it starts to get good only at higher volume. It is an entry level SPL subwoofer and requires more amplifier wattage in sealed enclosure. Huge bass from a fairly small cone. My enclosure is .78 cu ft, recommended is 1.0- 1.35 cu ft. I know it would be deeper with more cubes, just don't have the room.
For the money, its a steal. The TNT manual drawings are incomplete. Its true cutout size is 9-1/8" and could be tapered from 9" even. Measure twice cut once! I wasn't about to ruin a 1" baffle, (that 9 5/8" cutout figure is bunk. that's the distance from bolt hole center-to-center).
47 found this helpful
still holding strong
I got this sub runnin on a apsm 1500 @ 2 ohms paired with dbxi 10 in seperate boxes ( both subs are single4ohm) sub is seein 500 rms ..it holds its on ...the cone works a lot harder then the dbxi (polypropelyn vs pressed pulp) and voice coil gets hot but the sub has performed beautifully without a flaw...I even dropped it a couple times accidently before installing...if your looking for something low on the price bt big on the sound this is it...not a lot to look at but it sounds great when given over the recommended wattage rms
44 found this helpful
Great Value
Great subwoofer for the price. Highly recommend in a sealed enclosure, not for ported boxes. When setup correctly they sound great!
31 found this helpful
NVX 20 ft. of True Spec 8 Gauge Speaker Wire
Flexible multi-strand cable bends and twists to meet your installation needs.
(45)
$49.99
List price $64.99
Belva 23 ft. of 12 Gauge Speaker Wire
Ultra-flexible PVC blended jacket for easy installation.
(43)
$6.99
List price $14.99
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!
(9)
$155.99
List price $339.00
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
(47)
$156.95
List price $187.44
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(127)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
• Peak Power: 500 watts
• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 4.92"
• Sensitivity: 85 dB
(5)
$69.99
List price $89.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
