not the best
The tool is very handy but the damping material is thin. NVX is better. If they made a bigger version of the tool that comes with it I would buy that. Way better than any roller.
24 found this helpful
Get it while it lasts
I purchased enough of these sheets to do my entire roof in my Oldsmobile 98 Regency Brougham while I have the headliner out. Before, knocking on the roof sounded like an empty oil barrel, now it sounds like a solid plank of wood. My speakers sound louder and the A/C seems like it doesn't take as long to cool the car down. At 6 bucks for 2 10"x10" sheets, you won't find anything cheaper and this stuff really works.
16 found this helpful
Affordable Alternative to Dynamat
This stuff works just like Dynamat it is made of the same material. If you are looking to improve your sound quality by ridding background noise that interferes with noise from speaker vibration this is key. It really cuts the outside noise from being projected through your speaker. This product is super cheap and it works the same as Dynamat at a fraction of the price!
16 found this helpful
worth it
Cheap and works great. Does what it needs to. Cuts easy. Need roller install tool also though.
15 found this helpful
Cheap and good
I don't compete anymore and just wanted to absorb some resonance from speakers in the doors..
14 found this helpful
Good stuff!
Works great as good as dynamat.. Cheap, fast shipping, great customer service, what more can I say?
13 found this helpful
Working great.
Nice size to place through a 6.5" hole. The tool does it's job to press it into place. I would defiantly use them again.
12 found this helpful
good deal Ive used the plastic tool for pulling panels also
Good price, I ended up buying alot of this to do my car floors and doors.
12 found this helpful
Easy to use and right price
I must admit I've never installed sound dampening materials before. I purchased 4 of these kits and used two of them on the rear deck of my 98 Civic today. I was able to almost entirely cover the rear deck and even put two or three layers in certain areas till the tap test sounded pretty good. At this price I would not hesitate to buy more if the other two don't do the job on my front doors. Very easy to install. Sticks very well and was easy to manipulate even though it was below 60 degrees today. I cannot tell you if it improved the sound of my speakers because I installed new speakers at the same time. I can say that the change in tapping on the metal is significant enough I strongly believe it does reduce distortion and rattles.
13 found this helpful
Good cheap product
Recommended for cheap price and works just as well as the high priced products.
13 found this helpful
Good stuff...
I am sure there are better sound deadening materials out there that are thicker and block sound better. However for a system that isn't audiophile grade(I mean what is in a daily driver), and you just want to remove some rattles and enhance your sound, this is great stuff. The price is right compared to the others, and it's super easy to cut and apply. I may buy more in bulk and go crazy in my truck, just for fun.. :-)
12 found this helpful
Pretty good stuff for the money, but get NVX if you can.
The stuff is much thinner than NVX dampener. The tool works pretty well but I like using a roller. NVX dampener seems to be a much better value.
11 found this helpful
Works
Easy to work with and does what I needed. Not the thickest material but it is cheap.
11 found this helpful
Great product
The Accumat was easy to use and worked great! My Mustang had a poor shallow sound from the rear speakers but after the Accumat I am listening to solid bass and crisp treble. If you are getting new speakers or just want to improve what you have then do yourself a favor and get the Accumat. I am restoring a Chevelle and will use the Accumat when I put in the sound system.
11 found this helpful
A little expensive but worth it
Goes on easily and stops all vibrations, it is expensive but very worth it.
11 found this helpful
Good Product
This stuff really works! It sticks really well and is easy to install. The instructions say to put the entire sheet over the speaker mounting hole and then cut out the center. Use the cutout piece on the outer wall behind the speaker. It's easy and the included plastic tool works very well, especially on uneven surfaces.
The reduction in vibration is immediately apparent and the bass sounds better.
A good product at a great price.
11 found this helpful
WORKS GREAT AND HELPS SPEAKERS ALOT!!!
When this product is installed properly you will get more bass and more sound quality from your speakers! It blocks some noise from the road. Its enough to cover two speakers! I would recommend this sound dampenig to anyone whos looking to get more bass and quality from speakers! Of course SonicElectronix is the boss!
10 found this helpful
I keep coming back
I've bought quite a bit of stuff now and I've referred friends to Sonic. i bought accumat. It was super cheap and made such a big difference. i recently bought speakers and my doors had a rattle when the bass hit. Not anymore. this stuffs pretty awesome. The shipping was crazy. i live in Tennessee but the package was shipped to ohio then georgia b4 it came to me. I still got it in about 8 days. Probly gonna buy more to finish up the rest of my ride. Good stuff!
10 found this helpful
Sound Damp
Used these on my 6.5 kick panels and they worked perfectly, no rattling and made the speaker perform better. Great buy.
10 found this helpful
Very Good, & Way Cheaper Than Dynamat
Took allot of the rattle out of my Miata doors. Installed same time I installed Pioneer Premier 6.5" door speakers. Those who have Miata's know they rattle like crazy. This was well worth deadening about 75% of the rattles I was having...
10 found this helpful
Easy to Use and Works Well
I installed this product in the front door panels of a 98 Jeep Cherokee. The area that I installed it had lots of contours, but I didn't have any trouble getting the material to stick. I installed it during the winter time, so it was pretty cold and the material was stiff. I took a small electric heater and used it on both the door and the mat for about 10 minutes and it was plenty soft and stuck securely.
The material did help deaden the area around the speaker and provided a cleaner sound. I think the major downside was it's size. It only covered about 1/4 to 1/3 of the door. To really deaden the whole door from the speaker and road noise, a much larger mat is needed.
Pros:
Easy to work with
Great adhesion
Cleaned up the sound
Cons:
Not large enough to fully cover a door
9 found this helpful
welllll
It's not name brand but it worked. was only for speakers on my dash but its fine.
10 found this helpful
Works great!
It does what it is designed to do. Need i say more?
9 found this helpful
nice
Nice little kit, great for some small door or panel speakers.
6 found this helpful
I had some vibration on my front door speakers, so i ordered this, thinking it would help. Actually it did nothing in my opinion, and im only kicking 100 watts out the speaker. Also i had to cut the plastic lining the door has, which is suppose to stop car, So now my left foot is always cold because air comes in. At least the speakers stay cool. The installtion tool though is sweet. I used it instead of dynamat roller
6 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.