Equalizers & Sound Processors

• 2-Way/3-Way Electronic Crossover
• Bass boost (0-12dB @ 45Hz)
• Quasi-Parametric EQ
• 180-Degree Phase-Shift Switch
• Front/Rear Channel Frequency
• Front and Rear Adjustments
• RCA Pre-Amp Output

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• 15 Band Parametric EQ
• 6-Channel RCA Outputs
• Provides up to 6.5 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• PAC LD-10 Line Driver with Signal Booster
• Boost Your Signal and Gain the Most Power Out of Your System
• 10X RCA Signal Booster
• Solid State Ground Loop Isolation
• Left and Right Gain Level Adjustment

• Plug and Play T-harness for faster installation
• 31-Band graphic EQ
• Can be used with OE and aftermarket radios
• Settings adjusted via Bluetooth® in a smart device
• Retains U-Connect voice prompts
• Independent high pass, low pass, and bandpass filters

• Tone Generator
• Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper
• Auto Shutoff

• 6-Channel Line Driver
• Provides up to 24 dB of Gain
• Gray steel chassis with gold-plated RCA jacks
• Balanced Differential Inputs
• Linkable Inputs - 2 Input Channels to 6 Output Channels

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator

• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters

• Active Crossover with Remote Bass Control
• Infinite Asymetrical Electronic Crossover Design
• Quasi-Parametric EQ with 45Hz Bass Boost Circuitry
• 2nd Order Butterworth Hi-Pass Filter
• Chrome Case

• 2-Channel Premium Adjustable Line Output Converter
• 3:1 Step Down With Adjustable Output
• 300w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• Digital Bass Reconstruction Processor
• 160dB Mircophone
• Switchable Backlight Illumination Color(Blue or Red)
• ParaBASS Equalization
• SPL Display

• Network Hub Controller
• Works with JL Audio's VXi Amplifiers
• Controls Up To Five Amplifiers
• Coming Soon!

• Digital Sound Matrix Processor
• Allows users to truly optimize the performance of their audio system
• Line-level and Digital audio inputs
• 30 bands of equalization
• Dimensions: 10.5"W x 5.7"D x 1.6"H

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• Adjustable 2-channel line out converter
• Separate level adjustment for each channel
• 400 watt maximum output
• AccuBASS circuitry restores bass signal

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• 2-Channel Universal Punch EQ
• Built-In Line Driver
• Auto-Sense Turn-On
• Compact Design

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator