Customer Ratings & Reviews

great value

This harness fit me car perfect, the only better thing was the fact that it wired up to the radio harness by color coding. Be aware that the + and the remote wire does not work on this harness, Just simply run your own wires and youre fine.

Looks great

2005 Hummer H2 worked perfect and looks great. Could have better instructions

A little Confusing

Had a hard time with this... could not get to fit properly...instructions were not very user friendly...more for an installation shop.

works good

cant do the install with out it it works as it should

Extremely easy

Extremely easy to install, instructions are included. Thanks Sonic for the free kit!

Good

This is a must have to make change out look professional and fit original double din opening.

great!!!!

One of the easiest if not the easiest kit I have ever used to install!! Gives off a great fit doesn't leave any gaps or any bulges. Great kit!!!!

Good Value

The face plate looks good, but there is some work to understanding the pieces

Confusing at first but works fine

Got for double din stereo. If you buy this one just throw the instruction book away because it is very hard to understand with very little instructions. I think there are only about 1 page per car type. Its easier to just look at what you need and slowly cut parts off to fit it. But it does work and it holding my stereo tight.

terrible directions

This is made nice and sturdy but do not use the manual. It will tell you to cut out pieces you should not for your vehicle. When you install it just keep test fitting it and find out which parts of the mount you clearly need to cut off, the directions are misleading and will mess up the installation.

fits like a glove

Does it's job like is supposed to.... I would recommend this product.....

Worked great

I would recommend this product. It was easy to install and it looks great in my old ride.

cool

wonderful!!!

cheap

The instructions were not clear with this product at all as it is universal. also within a few minutes of tampering with flat broke in half tossed in garbage went to audio store got a different bracket with a little fitting worked just fine

No Problem Jack!!

Can;t complain, did what it was design for with no issues ,easy install..

Great Kit

Kit ended up working like a charm after understanding how it worked and learning that you have to remove half the mounting brackets.

American International GM-K422

Because this is basically a one fits all product, be prepared to do a lot of cutting. Almost all the tabs were removed to fit my Grand Am.

Great Kit; Great Price

After all was said and done, I was pleased with the outcome of the overall look of this kit. However, I won't hesitate to mention the fact that the instructions/manual that came with it was incredibly vague and I never felt, while preparing it for installation, completely sure that what I was doing was correct. I am referring, in all of this, to the preparation that has to take place before actually installing your 2-DIN receiver. I had to bust out my dremmel tool in order to sand down/cut off unnecessary pieces of plastic (granted yes, this is a "universal" dash kit and so as such "fits" a large number of cars) which I don't think I was ever expecting to have to do. It probably took me about 1/2 hour to an hour of added prep time just to get this ready for installation purposes. But again, like mentioned at the beginning, after all was said and done, I was pleased with the overall outcome and look of the kit in my '02 Chevy Impala. Would recommend to anyone willing to put in the time and effort to prep the kit for your specific car--to anyone else, I would recommend just getting an install kit a lot more specific to your car rather than a universal kit like this one.

Worked as promised

Made install very easy after instructions were read.

Great Service !!

I ordered this part but it was missing a couple of pages in the instructions so I contacted them and the were quick to send my the missing pages. Install went fine from there!! Thanks..

Looks great for the price

It came free with my double din. I thought the middle part would be on it but its not on there which was a relief. Good product.

Awesome

This product worked very well. Also easy to install. Must buy

Good product

Took stock radio out, followed instruction and used this kit. It works perfect so far. I had to cut the center brace out because I have double din, it cleaned right up and didn't just break away.

Great Install Adapter!

This adapter kit came with my Pioneer FH-X500UI stereo. It fit perfectly around the stereo and mounted great to the frame of my 2DIN hole for the stereo. All the mounting holes lined up perfectly. I had my doubts when I first saw it. I followed the instructions and it worked!

radio bracket

This thing worked great, fit good and looks good glad I got it.

good deal when you buy a radio

Sonic electronix makes it so easy to install and they give you the install parts for free.

fits great

Fits great in my 2003 S10. No issues whatsoever. Couldnt ask for a better product.

Good looking, great price!

When I received this kit I thought it seemed flimsy, but after assembling it and installing the radio in my dash, it looks very professional and clean. The kit keeps the radio looking like a factory install, not a protruding ugly aftermarket job. My buddy had the same radio I have, but a different install kit. The one he used keeps the radio protruding out of the dash. We have the same Avalanche truck, radio but different install kits. He now wishes he had the same kit I used. I definitely will recommend this kit to anyone. Not to mention the price is great as well!

Good

Securely mounted my CX501 into the dash of my Buick Park Avenue.

Great Product, Good Fit

Works exactly how it's supposed to, easy to install, and looks great and flush. Makes my double din Pioneer look factory. Sonic included it for free in my order also.

Works Great !

Been doing installs for more than 35 yrs. This is a great product and for the money. Can't go wrong with the GM-K422 and the Sonic service just as stellar! I have ordered other items from Sonic, they have done some amazing things for me and I am grateful! Thank You Sonic Electronix.com

Just a snap...

Easy to install just plug and go. Works flawless with no problems at all.

Gets the job done.

Good mounting kit. Just make sure you know which tabs you need and which ones to cut. Also if you're using it for a double din a good razor blade will cut the middle bar out easily.

Good Product GM-K422

Would use the product again in the future

Jensen vx7020

I've got it installed and it's working very well I really like it got the Xm and the back up camera and the GPS nice unit I like it.....

Pretty Good.

Required a lot of trimming, but it wasn't hard. Installed in a 2004 pontiac bonneville. It did not hold up the radio in the back, so i had to put a thin piece of rubber underneath it to hold the radio even. I just cut up a mudflap, and that worked good.

perfect fit

Perfect fit great quality way better than schoche.

GM Retro

This made my install of the Pioneer head unit look like it was factory install for my Buick Regal. I went all out on this project and I love looking at the results and the beautiful sound in my 1997 Regal.

what can I say ?

It works!

GOOD

This worked find after a few mods. Yes, i would recommend this.

Great product for the price.

I got this holding my Valor DTS-660W in the dash of my 2002 s-10. Instructions are kinda tricky, but if you follow them closely you will be able to make it work without breaking it. (It is only plastic after all).

Worked Perfect!

I used this to install a Jensen VM9021TS in my '02 Trailblazer and it worked perfectly. Just make sure your radio is supported properly from the back as the mounting brackets look kinda weak around where they are screwed to the dash. If your radio isn't supported good at the back it looks the mounting brackets might break if you hit some hard bumps.

Installation kit

Worked very well it made installing easy and fast thanks

good deal

used this kit to install my pioneer head unit worked good had no issues

easy to use kit

Used this particular kit a few times now and it's worked well in every install. The holes in the side pieces I needed to widen a little bit for the unit I put in my car, but that was specific to my car and not all others. I installed a double din with subwoofer rcas and my dash isn't deep enough so that was the mod. Very nice kit though

good kit

This kit works great for double din radios.

excelent!

fits exactly in the car.

Couldn't Use Product!

i could not use this product because it didn't fit the head unit i purchased which was a double din dvd player.

Great product.

Perfect fit on my truck, I purchased more than one w/ SonicElectronix

American International GM-K422

Frame worked well and was easy to install.

Works like a charm.

It allowed for a nice neat installation of a Kenwood DNX-6140 nav unit double-din radio. The center rib has to be cut out for a double-din install but no big deal. Great value.

Works Great

Easy to use. Went together just right. No problems. Made install a snap

Great kit...!

Really like this install kit...Good instructions and ease of use as well as perfect fit ...A++++

GM-K422

This worked fone and had no issued getting it set up correctly. Though the instructs could have been better I was able to get it correctly installed

Instructions were tricky easy to use though.

Instructions were slightly unclear as what exactly to do. Turns out that this product requires you to 'break' pieces off in order to use it which is counter-intuitive. Still, a pretty easy install once you work through it but it took some thinking.

For anyone who might be looking for a better explanation of what I mean by break pieces off, basically there are multiple tabs on the bracket and they all fit different vehicles, you have to break off all the ones that don't fit your vehicle with pliers or cutters and then put the bracket onto the head unit. Then into the dash. The instructions just refer to 'removing tabs' , and the parts you have to break off are not obviously meant to do so.

Fills the void.

Completely filled in the empty space around my new JVC.

Great Value

Great Value.

Super Easy!

This made it super easy to install my receiver. It only took me about 45 min to do the complete install.

a needed product

This product was alright except for the fact it has to be modified not all notching was complete. But with a sharp knife you can fix the problem

eh its ok but lots of work

Several of the tabs had to be removed to make it fit in the double din space on my 03 chevy blazer. also to get the head unit mounted into this kit was a pain but eventually got it. Its all mounted and plugged in now, and it is fairly good fit. not perfect and you can wiggle the stereo if you push hard enough. Its not perfect or anywhere close to easy to install at all, but ive done at least 10 car stereo replacements so i was eventually able to figure it out. With that in mind, for being included for free with the Eclipse CD1200G that i bought, you cant go wrong.

Good product

Great product easy to use. Would like to see an optional trim ring for double din radios included.

Fits The Bill

The brackets fit perfectly into my 2003 double din Chevy Tahoe. now spaces or gaps with my aftermarket Jensen head unit

easy!

This kit made it so easy. And the finished job looks like I paid someone to do the install.

Great fit for my car

This part fit fine would buy it again if needed.

By charles on June 8, 2020 Verified purchase