Discontinued 4-Channel Amplifiers

800 watts RMS 4-channel amplifier • Reference Series • signal/noise ratio: >80 dB • input signal: 150mV - 8V • dimensions: 11" x 15.75" x 2.25" • dissipation topology: cast aluminum heatsinks • RCA signal input

• 125 Watts RMS x 4 @ 4 ohm
• 250 Watts RMS x 4 @ 2 ohm
• 500 Watts RMS x 2 Bridged @ 4 ohm
• Total Peak Power: 1000 Watts
• Speaker-level (high-level) inputs
• Variable high-pass filter: 120 - 3000 Hz
• Variable low-pass filter: 50 - 250 Hz
• Variable Bass Boost: 0 to +12 dB bass boost

• 4 ohm: 75 watts x 4-Chan.
• 2 ohm: 95 watts x 4-Chan.
• Bridged, 4 ohm: 190 watts x 2 chan.
• Max power output: 900 watts

GT Series 4-Channel Reference Amplifier • 75W x 4 Chan. @ 4 Ohm • 120W x 4 Chan. @ 2 Ohm • Fully Computer-Controlled Diagnostics System • Q-Tune™ Technology • Fan Cooled Aluminum Alloy Heatsink •

• RMS: 150W x 4 @ 4 ohm, 225W x 4 @ 2 ohm• Bridged: 450W x 2 @ 4 ohm
• Total Peak Power: 1800W
• 16V Capable Power Supply
• Bipolar Japanese Sanken Outputs
• 11.6"W x 22"L x 2.7"H

440W RMS Class AB Four-Channel System Amplifier • Absolute Symmetry Class AB Circuit • On-board crossover: HPF/LPF(50-200 Hz.) • 110 watts x 4 chan. @ 2 Ohm(14.4V) • Low(RCA) and high-level inputs • CEA-2006 Compliant

Blast Series 4-Channel Class A/B Car Amplifier • 3000W Max • 160W x 4-Chan @ 2 Ohm • Preamp RCA Outputs • 3-Way System Protection Circuitry • Variable High/Low-Pass Filter

• RMS Power: 150W x 4 @ 4 Ohm / 240W x 4 @ 2 Ohm / 480W x 2 @ 4 Ohm Bridged
• Extreme Power in a Small Footprint
• 2 CH / 4 CH Input mode Switch
• Low Distortion Full Band Width for Sound Quality Tuning
• Mil Spec Double Sided PCB design with SMD parts

4-channel A/B power amplifier • 105W x 4 RMS @ 2 Ohm • Bass remote included • Built in Hi/Low crossover • Subsonic filter • Voltage display • 3-Way protection circuitry

1000W High Performance 4 Channel Amplifier • 250W x 4 power output • polished chrome finish with plexiglas panel • remote control bass boost • fully adjustable x-over • variable gain control • MOSFET PWM power supplies

1000W 4-Channel Amplifier • 125W x 4 chan. @ 4 Ohm • 250W x 4 chan. @ 2 Ohm • full MOSFET circuitry • line inputs/outputs • adjustable input sensitivity • power/protection LED • S/N ratio: 90dB

Big Bang Series 4-Channel Digital Car Amplifier • 1200W Max • 300W x 4-Chan @ 2 Ohm • Strap Two Amps Together for Twice the Power • 3-Way Protection • Variable Bass Boost (0 to +12 dB) &bull

4-Channel Power Density Digital Amplifier • 150W x 4 chan. @ 4 Ohm • class D amp design • stackable installation design • MOSFET power supply • quick connect power connectors

120 watts RMS x 2 • selectable front and rear crossovers • preamp outputs • speaker level inputs with Smart Engage

1200W 4 channel Millennia Series Amplifier • 225W x 4 (@ 2 Ohm) power output • variable high/lo electronic crossover • variable bass boost • remote turn on/off • preamp outputs • power LED indicator • LED protection indicator • MOSFET power supply

400W RMS x 2 bridged • variable high-pass/low-pass crossovers • variable front and rear gain controls • preamp outputs

D7 Series 6-Channel Amplifier • 50W x 6 chan. @ 4 Ohm • 100W x 6 chan. @ 2 Ohm • fully regulated power supply • third-order Butterworth crossover • gold plated copper circuit board • forced-air cooling system

HA Series 4-Channel Class AB Car Amplifier • 100W x 4 chan. @ 4 ohm • 200W x 4 chan. @ 2 ohm • 500W x 2 chan. Max • 4/3/2 Channel operation • Short circuit, thermal, and overload protection

250 watts x 4 RMS RedSeries Power Amplifer • 500 watts x 2 bridged • Gold Plated RCA • Inputs Thermal, Overload, Short Circuit Protection

150W Peak / 75W RMS x 4 Channel Viberant Series Amplifier • Electronic Crossover Network • gold RCA inputs • bass boost circuit • 2 ohm stable • Tri-Mode Capable • Dual VU Meter