Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Discontinued Car Audio & Electronics
  3. Discontinued Car Amplifiers
  4. Discontinued Equalizers & Sound Processors
  5. Discontinued Line Out Converters

Discontinued Line Out Converters for your 2012 Mustang close

Filters
Reset Done
Show products that do not fit
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Your Vehicle

close
Checkmark Icon
2012 Mustang
Product results for your vehicle – confirm details to verify fitment.
Update vehicle | Remove vehicle | Vehicle store

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

NVX XLOC66X (Open Box, Good)

6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

XLOC66X big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

NVX XLOC66X (Open Box, Good)

6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

Universal Icon Universal – fits most vehicles.

Shop similar products or Update vehicle

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

NVX XLOC24X (Open Box, Good)

2 inputs / 4 outputs High Voltage Active Line Output Converter with Impedance Matching

XLOC24X big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

NVX XLOC24X (Open Box, Good)

2 inputs / 4 outputs High Voltage Active Line Output Converter with Impedance Matching

• 2-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

Universal Icon Universal – fits most vehicles.

Shop similar products or Update vehicle

• 2-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

NVX XPLOC4 (Like New (Open Box))

4-Channel 600W Adjustable Line Output Converter with Remote Turn On

XPLOC4 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

NVX XPLOC4 (Like New (Open Box))

4-Channel 600W Adjustable Line Output Converter with Remote Turn On

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

Universal Icon Universal – fits most vehicles.

Shop similar products or Update vehicle

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

NVX XLOC44X (Open Box, Good)

4 inputs / 4 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

XLOC44X big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

NVX XLOC44X (Open Box, Good)

4 inputs / 4 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

• 4-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

Universal Icon Universal – fits most vehicles.

Shop similar products or Update vehicle

• 4-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

Audio Control LC2i PRO - New (Damaged Packaging, Product A+)

2 Channel 400 Watts Line Output Converter

LC2i PRO big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Audio Control LC2i PRO - New (Damaged Packaging, Product A+)

2 Channel 400 Watts Line Output Converter

• Adjustable 2-channel line out converter
• Separate level adjustment for each channel
• 400 watt maximum output
• AccuBASS circuitry restores bass signal

Universal Icon Universal – fits most vehicles.

Shop similar products or Update vehicle

18

• Adjustable 2-channel line out converter
• Separate level adjustment for each channel
• 400 watt maximum output
• AccuBASS circuitry restores bass signal

Prev 1 2 3 4 5

Items per page: 20 40 60

    Clear all

    FAQ Frequently asked questions in Discontinued Line Out Converters

    An amp line out converter, also known as a line output converter (LOC), is a device used to convert high-level speaker-level signals from a car's factory stereo into a low-level RCA signal. It allows you to connect aftermarket amplifiers or audio processors to the existing factory audio system, which often lacks RCA outputs. Using an amp line out converter is essential to ensure a clean and reliable signal transfer from your car's stereo to the aftermarket components, such as subwoofers or external amplifiers. Without a line out converter, attempting to tap into the speaker wires directly for signal input can lead to signal distortion, noise, and potential damage to your audio equipment.
    Installing an amp line out converter requires some basic knowledge of car audio wiring and connections. Start by identifying the speaker wires that you want to tap into for the audio signal. Use a wire stripping tool to expose a small section of the wire's insulation. Next, connect the speaker-level input wires of the line out converter to the corresponding speaker wires, ensuring proper polarity. Once the input connections are secure, connect the RCA output cables from the line out converter to the RCA inputs of your aftermarket amplifier or audio processor. Finally, connect the converter's ground wire to a suitable grounding point, typically the car's chassis. Before finalizing the installation, double-check all connections and ensure there are no loose wires.
    Yes, you can use multiple amp line out converters in your car audio system if you require different signal outputs for various audio components. For instance, if you are amplifying multiple speakers and a subwoofer, you may need separate converters to provide the necessary signal inputs to each amplifier. When using multiple line out converters, it is crucial to ensure proper signal level matching and avoid signal clipping or distortion. Additionally, make sure that each converter's ground wire is adequately connected to prevent ground loop noise. If you are unsure about the best setup for your specific audio system, consider consulting with a professional car audio installer or technician to design an optimal configuration.
    In most cases, an amp line out converter requires a remote turn-on wire to activate the aftermarket amplifiers or audio processors. The remote turn-on wire is responsible for sending a signal to the amplifiers when the car's stereo is turned on. It ensures that the amplifiers power up and down along with the factory head unit, preventing unnecessary power drain and ensuring proper system operation. Locate the remote turn-on lead from your car's stereo or ignition system, and connect it to the remote turn-on input on the line out converter. This simple connection enables the entire audio system to turn on and off automatically, providing a seamless and convenient listening experience.
    Yes, an amp line out converter can significantly improve the sound quality of your factory car audio system, especially when used in conjunction with aftermarket amplifiers and speakers. Factory head units often lack the power and audio processing capabilities of aftermarket audio equipment, resulting in subpar sound performance. By integrating an amp line out converter and adding external amplifiers, you can achieve cleaner and more powerful audio output. This setup allows you to drive high-quality aftermarket speakers or subwoofers efficiently, resulting in improved clarity, bass response, and overall audio fidelity. Additionally, many line out converters come with built-in signal processing features, such as bass restoration or line level adjustment, enabling further customization and fine-tuning of the audio output to suit your preferences.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2017 Nissan Leaf

    1996 Mazda Millenia

    2012 Ford Mustang

    2006 Suzuki Forenza

    1991 Mitsubishi Eclipse

    2025 Cadillac XT5

    1994 Saturn SL1

    2008 MINI Cooper

    2000 Mazda Protege

    1984 Ford B7000

    Vehicle
    Store     Delete

    2007 Harley Davidson FXDSE Screamin Eagle Dyna

    Vehicle
    Store     Delete

    2013 Can-Am Commander E LSV

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2012 Mustang
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo