Home

Discontinued Car Audio & Electronics

Discontinued Car Speakers

Discontinued Midbass Drivers & Midrange Speakers

Discontinued Midbass Drivers & Midrange Speakers

It’s a no-brainer.
Get your speakers here.

Install kit discounts · Guaranteed fit · Full warranty

	Sonic Electronix	Others
Guaranteed to Fit	✓	✕
Free/Discounted Speaker Adapters*	✓	✕
Free/Discounted Wiring Harness*	✓	✕
Authorized with Full Warranty	✓	✕

*We always guarantee fitment of the speakers and gear you buy. Free/discounted accessories are dependent on the speakers being purchased and the vehicle.

Speaker Adapters

Wiring Harness

*Savings vary by speakers and vehicle

Filters

Reset Done

Brands

You Recently Chose:

Rockford Fosgate (14)

We are sorry, no available results!

Product Type

You Recently Chose:

Speakers (451)

Default (7)

Subwoofers (6)

Vehicle-specific speaker kits (5)

Speakers sold in multiple sets (3)

Price Range

Speaker Location

Lower Cab Corners (97)

Rear Door (97)

Speaker Size

Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.

5" x 7" (also 6" x 8" locations) (2)

6" x 8" (2)

15" (1)

5" (1)

6-1/2" (also 6-3/4" locations) (1)

6-3/4" (1)

7" (1)

Design

The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.

2-way Component System (4)

3-way Component Speakers (3)

3-way Coaxial (1)

Hybrid Coaxial Midrange (1)

RMS Power Handling

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.

Up to 34.99 watts (6)

35–54.99 watts (35)

55–74.99 watts (40)

75–99.99 watts (53)

100 watts or more (273)

Peak Power Handling

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.

Up to 99.99 watts (7)

100–199.99 watts (86)

200–299.99 watts (150)

300 watts or more (173)

Sensitivity

An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".

80–89.99 dB (70)

90–99.99 dB (296)

100–109.99 dB (51)

Impedance (Per Voice Coil)

The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.

Shallow Mount Installation

This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No (275)

Yes (16)

Tweeter Design

Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.

Series

Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.