Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Discontinued Car Audio & Electronics
  3. Discontinued Car Speakers
  4. Discontinued 4x10" Speakers

Discontinued 4x10" Speakers

Exclamation Icon It’s a no-brainer.
 Get your speakers here.

Install kit discounts · Guaranteed fit · Full warranty
Filters
Show products that do not fit ✕
Clear Filters
Reset Done
Product Type
Price Range
Product Fitment Type
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition
Gear Icon Find speakers that fit. Set your vehicle.
  • Mounting adapter brackets
  • Harness to avoid cutting vehicle wires

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Kicker KSC4100 (44KSC41004)

300W Peak (150W RMS) 4x10" KS Series 2-Way Coaxial Car Speakers

44KSC41004 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KSC4100 (44KSC41004)

300W Peak (150W RMS) 4x10" KS Series 2-Way Coaxial Car Speakers

• 150 Watts Max Each, 75 Watts RMS Each
• 1/2" Silk Balanced Dome Tweeter
• Polypropylene Midwoofer
• 4 Ohm Impedance
• Sensitivity: 88 dB
• Mounting Depth: 2-3/8"

checkmark icon Confirm fitment. Set your vehicle.
5

• 150 Watts Max Each, 75 Watts RMS Each
• 1/2" Silk Balanced Dome Tweeter
• Polypropylene Midwoofer
• 4 Ohm Impedance
• Sensitivity: 88 dB
• Mounting Depth: 2-3/8"

PowerBass S-412

4" x 10" 2-way S Series Coaxial Car Speakers

S-412 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

PowerBass S-412

4" x 10" 2-way S Series Coaxial Car Speakers

4" x 10" S Series Car Speakers • 150W Max • 50W RMS • 2-Layer paper, Dampening Cone for Distortion Free Bass • UV Protected Foam Surround • Silk Dome Tweeter • 4 ohm Impedance • 10oz. Magnet Structure

checkmark icon Confirm fitment. Set your vehicle.
9

4" x 10" S Series Car Speakers • 150W Max • 50W RMS • 2-Layer paper, Dampening Cone for Distortion Free Bass • UV Protected Foam Surround • Silk Dome Tweeter • 4 ohm Impedance • 10oz. Magnet Structure

Audiobahn AS41Q

4" x 10" 2-way Car Speakers

AS41Q big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Audiobahn AS41Q

4" x 10" 2-way Car Speakers

4" x 10" 2-Way Speakers • 100W RMS • Chrome Plated Basket • Black Poly Carbon Cone • Butyl Rubber Surround • Removable Tweeter for Remote Mounting • 18 oz. Magnet

checkmark icon Confirm fitment. Set your vehicle.

4" x 10" 2-Way Speakers • 100W RMS • Chrome Plated Basket • Black Poly Carbon Cone • Butyl Rubber Surround • Removable Tweeter for Remote Mounting • 18 oz. Magnet

Audiopipe CSL-4102

400W Max (100W RMS) 4" x 10" 2-Way CSL Series Coaxial Car Speakers

CSL-4102 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Audiopipe CSL-4102

400W Max (100W RMS) 4" x 10" 2-Way CSL Series Coaxial Car Speakers

• Peak Power: 200W per speaker
• RMS Power: 100W per speaker
• 1.16" Mylar Tweeter
• Sensitivity: 88dB
• Electroplated Injection Polypropylene Cone
• Rubber Surround

checkmark icon Confirm fitment. Set your vehicle.
3

• Peak Power: 200W per speaker
• RMS Power: 100W per speaker
• 1.16" Mylar Tweeter
• Sensitivity: 88dB
• Electroplated Injection Polypropylene Cone
• Rubber Surround

Volfenhag ZX-858R

4" x 10" 2-way Speakers

ZX-858R big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Volfenhag ZX-858R

4" x 10" 2-way Speakers

400 watt 2-way coaxial speakers • 400w Peak • 150w RMS • 1/2" neodymium dome tweeter • red poly coating paper cone • butyl rubber surround

checkmark icon Confirm fitment. Set your vehicle.
3

400 watt 2-way coaxial speakers • 400w Peak • 150w RMS • 1/2" neodymium dome tweeter • red poly coating paper cone • butyl rubber surround

Planet Audio TQ413

4" x 10" 3-way Anarchy Series Coaxial Car Speakers

TQ413 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Planet Audio TQ413

4" x 10" 3-way Anarchy Series Coaxial Car Speakers

• Peak Power: 300W
• RMS Power: 150W
• 2" Tweeter and 1" Micro Tweeter
• 3-Way Design
• Gloss Black Poly Cone
• Rubber Surround
• Aluminum Voice Coil

checkmark icon Confirm fitment. Set your vehicle.
14

• Peak Power: 300W
• RMS Power: 150W
• 2" Tweeter and 1" Micro Tweeter
• 3-Way Design
• Gloss Black Poly Cone
• Rubber Surround
• Aluminum Voice Coil

Polk Audio MOMO MMC410

4" x 10" 2-way MOMO Series Speakers (MMC 410)

MMC410 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Polk Audio MOMO MMC410

4" x 10" 2-way MOMO Series Speakers (MMC 410)

4" x 10" 2-Way MOMO Series Speakers • 70W RMS • 140W Peak • woven carbon fiber cone • airtight rubber surround • stamped metal basket • flat NOMEX spider • dual nickel plated polarized terminals • sensitivity: 89dB

checkmark icon Confirm fitment. Set your vehicle.
2

4" x 10" 2-Way MOMO Series Speakers • 70W RMS • 140W Peak • woven carbon fiber cone • airtight rubber surround • stamped metal basket • flat NOMEX spider • dual nickel plated polarized terminals • sensitivity: 89dB

Kicker KS4100 (08KS4100)

4" x 10" 2-way KS Series Coaxial Car Speakers

08KS4100 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KS4100 (08KS4100)

4" x 10" 2-way KS Series Coaxial Car Speakers

4" x 10" KS Series Car Speakers • 70W Max • 35W RMS • Injection Molded Polypropylene Cone Woofer • Santoprene Surround • 1/2" Kaladex Dome Tweeter • Neodymium Magnet With Ferrofluid • 4 ohm Impedance

checkmark icon Confirm fitment. Set your vehicle.
13

4" x 10" KS Series Car Speakers • 70W Max • 35W RMS • Injection Molded Polypropylene Cone Woofer • Santoprene Surround • 1/2" Kaladex Dome Tweeter • Neodymium Magnet With Ferrofluid • 4 ohm Impedance

Sony XS-W4121

4" x 10" Speakers

XS-W4121 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Sony XS-W4121

4" x 10" Speakers

4" x 10" 2-way speakers • polypropylene woofer • paper cone tweeter • peak power handling: 150 watts • sensitivity: 91 dB • depth: 2-1/2"

checkmark icon Confirm fitment. Set your vehicle.
2

4" x 10" 2-way speakers • polypropylene woofer • paper cone tweeter • peak power handling: 150 watts • sensitivity: 91 dB • depth: 2-1/2"

Power Acoustik XP-4103K

4" x 10" 3-way XP Series Coaxial Car Speakers

XP-4103K big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Power Acoustik XP-4103K

4" x 10" 3-way XP Series Coaxial Car Speakers

• Peak Power: 540W
• RMS Power: 270W
• 3/4" Silk Dome Tweeter
• Polypropylene Injection Cone Woofer
• 3 ohm Impedance
• Black Texture Coat Stamped Steel Frame
• Chrome Back Plate
• 25mm Voice Coil

checkmark icon Confirm fitment. Set your vehicle.
13

• Peak Power: 540W
• RMS Power: 270W
• 3/4" Silk Dome Tweeter
• Polypropylene Injection Cone Woofer
• 3 ohm Impedance
• Black Texture Coat Stamped Steel Frame
• Chrome Back Plate
• 25mm Voice Coil

Eclipse SE8405

4" x 10" 3-way Integrated Series SE Speakers

SE8405 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Eclipse SE8405

4" x 10" 3-way Integrated Series SE Speakers

4" x 10" 3-way Integrated Series SE Speakers • 100W Max • 35W RMS • Hybrid mica-polypropylene cone woofer • Rubber surround • Mylar dome tweeter and supertweeter • Neodymium tweeter magnet • 4 ohm impedance

checkmark icon Confirm fitment. Set your vehicle.

4" x 10" 3-way Integrated Series SE Speakers • 100W Max • 35W RMS • Hybrid mica-polypropylene cone woofer • Rubber surround • Mylar dome tweeter and supertweeter • Neodymium tweeter magnet • 4 ohm impedance

Kicker KSC410 (41KSC4104)

300W Peak (150W RMS) 4" x 10" 2-Way KS Series Coaxial Car Speakers

41KSC4104 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KSC410 (41KSC4104)

300W Peak (150W RMS) 4" x 10" 2-Way KS Series Coaxial Car Speakers

• Peak Power: 150W
• RMS Power: 75W
• 1/2" Silk Dome Tweeter
• Mounting Depth: 2-3/8"
• Polypropylene Midwoofer and Rubber Surround

checkmark icon Confirm fitment. Set your vehicle.
3

• Peak Power: 150W
• RMS Power: 75W
• 1/2" Silk Dome Tweeter
• Mounting Depth: 2-3/8"
• Polypropylene Midwoofer and Rubber Surround

Power Acoustik XP2K-4102

4" x 10" 2-way XP2K Series Speakers

XP2K-4102 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Power Acoustik XP2K-4102

4" x 10" 2-way XP2K Series Speakers

4" x 10" XP2K Series Car Speakers • 250W Max • 125W RMS • 4-Layer cotton fiber cone woofer • Polymide midrange tweeter • 4 ohm impedance • 1" Voice coil • Rubber boot magnet cover • 30oz. Magnet structure

checkmark icon Confirm fitment. Set your vehicle.

4" x 10" XP2K Series Car Speakers • 250W Max • 125W RMS • 4-Layer cotton fiber cone woofer • Polymide midrange tweeter • 4 ohm impedance • 1" Voice coil • Rubber boot magnet cover • 30oz. Magnet structure

RetroSound D-412 - Open Box, Good Condition (Used)

30 W Peak (15 W RMS) 4x10" 2-Way Coaxial Car Speaker Open Box Complete (Good, Used)

D-412 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

RetroSound D-412 - Open Box, Good Condition (Used)

30 W Peak (15 W RMS) 4x10" 2-Way Coaxial Car Speaker Open Box Complete (Good, Used)

• Item Condition - Good, Used
• 30 Watts Max,15 Watts RMS
• Dual Mylar tweeter
• Polypropylene cone
• 4 Ohm Impedance
• Sensitivity: 87 dB
• Mounting Depth: 2.3"

checkmark icon Confirm fitment. Set your vehicle.

• Item Condition - Good, Used
• 30 Watts Max,15 Watts RMS
• Dual Mylar tweeter
• Polypropylene cone
• 4 Ohm Impedance
• Sensitivity: 87 dB
• Mounting Depth: 2.3"

Memphis 15-PRC41

4" x 10" Power Reference Series 2-way Speakers

15-PRC41 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Memphis 15-PRC41

4" x 10" Power Reference Series 2-way Speakers

Power Handling: Peak: 100 watts / RMS: 50 watts • Swivel mount poly-aluminum dome tweeter • Kapton voice coil former • Frequency Response: 40 Hz - 20 kHz

checkmark icon Confirm fitment. Set your vehicle.
1

Power Handling: Peak: 100 watts / RMS: 50 watts • Swivel mount poly-aluminum dome tweeter • Kapton voice coil former • Frequency Response: 40 Hz - 20 kHz

Kicker 11KS410 (KS410)

4" x 10" 2-way KS Series Coaxial Car Speakers

11KS410 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker 11KS410 (KS410)

4" x 10" 2-way KS Series Coaxial Car Speakers

• Peak Power: 140W
• RMS Power: 70W
• 1/2" Balanced Dome PEN Tweeter
• Injection Molded Polypropylene Cone Woofer
• Santoprene Surround
• Neodymium Magnet with Ferrofluid
• 4 Ohm Impedance

checkmark icon Confirm fitment. Set your vehicle.
2

• Peak Power: 140W
• RMS Power: 70W
• 1/2" Balanced Dome PEN Tweeter
• Injection Molded Polypropylene Cone Woofer
• Santoprene Surround
• Neodymium Magnet with Ferrofluid
• 4 Ohm Impedance

RetroSound R-410N

160 W Peak (90 W RMS) 4x10" 3-Way Coaxial Car Speaker (Sold Individually)

R-410N big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

RetroSound R-410N

160 W Peak (90 W RMS) 4x10" 3-Way Coaxial Car Speaker (Sold Individually)

• 160 Watts Max Each, 90 Watts RMS Each
• Mylar tweeter
• Polypropylene cone
• 4 Ohm Impedance
• Sensitivity: 87 dB
• Mounting Depth: 1.7"

checkmark icon Confirm fitment. Set your vehicle.

• 160 Watts Max Each, 90 Watts RMS Each
• Mylar tweeter
• Polypropylene cone
• 4 Ohm Impedance
• Sensitivity: 87 dB
• Mounting Depth: 1.7"

RetroSound D-412 (Sold Separately - Not a Pair!)

30 W Peak (15 W RMS) 4x10" 2-Way Coaxial Car Speaker

D-412 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

RetroSound D-412 (Sold Separately - Not a Pair!)

30 W Peak (15 W RMS) 4x10" 2-Way Coaxial Car Speaker

• 30 Watts Max,15 Watts RMS
• Dual Mylar tweeter
• Polypropylene cone
• 4 Ohm Impedance
• Sensitivity: 87 dB
• Mounting Depth: 2.3"

checkmark icon Confirm fitment. Set your vehicle.

• 30 Watts Max,15 Watts RMS
• Dual Mylar tweeter
• Polypropylene cone
• 4 Ohm Impedance
• Sensitivity: 87 dB
• Mounting Depth: 2.3"

Boss AVA-4120 4" x 10" OEM Replacment

AVA-4120 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Boss AVA-4120 4" x 10" OEM Replacment

250 Watt Peak Power Handling

250 Watt Peak Power Handling

RetroSound S-412

50 W Peak (25 W RMS) 4x10" 2-Way Coaxial Car Speakers

No picture DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

RetroSound S-412

50 W Peak (25 W RMS) 4x10" 2-Way Coaxial Car Speakers

• 25 Watts Max Each, 15 Watts RMS Each
• Dual Mylar tweeters
• Polypropylene cone
• 4 Ohm Impedance
• Sensitivity: 87 dB
• Mounting Depth: 2.3"

checkmark icon Confirm fitment. Set your vehicle.

• 25 Watts Max Each, 15 Watts RMS Each
• Dual Mylar tweeters
• Polypropylene cone
• 4 Ohm Impedance
• Sensitivity: 87 dB
• Mounting Depth: 2.3"

1 2 3 Next

Items per page: 20 40 60

    Clear all

    All About Discontinued 4x10" Speakers

    4x10" Car Speakers

    4x10" car speakers are coaxial car audio speakers that are 4 inches in width and 10 inches in height. They are found mainly in older Saab and GM vehicles. This odd size comes with built-in tweeters, so the coaxial set covers a decent range of frequencies from high to lower mid-range. 

    4x10” coaxial speakers are oval-shaped loudspeakers with a multi-way woofer and dome tweeter typically made of injection-molded poly-made fibers. Standard features of 4x10" coaxial speakers are injection-molded poly woofer with foam surround and poly-amide balanced or neodymium dome tweeter. The sizes of 4x10” coaxial speakers are often found on older cars, such as models made by GM.

    Sonic Electronix's broad and diverse catalog includes an extensive choice of 4x10" car speakers to meet any car audio setup's style and performance needs. Shop 4x10" car speakers from hit audio makers such as NVX, Kicker, Pioneer, Boss, Kenwood, Cerwin-Vega, and more.

    4x10" Speakers Frequently Asked Questions (FAQ)
    4x10" speakers are a specific size of car audio speakers designed to reproduce mid-range and high-frequency sounds. These speakers have dimensions of 4 inches by 10 inches, making them an ideal choice for vehicles with dedicated speaker locations in the rear deck or parcel shelf. They are commonly used in older car models and some trucks, where the rear deck provides ample space for this speaker size. 4x10" speakers can deliver clear vocals and detailed mid-range frequencies, providing a balanced soundstage for the rear passengers and complementing other speakers in the car audio system.
    The advantages of using 4x10" speakers in your car include their ability to produce clear and well-defined mid-range frequencies. As rear speakers, they can enhance the overall listening experience for passengers seated in the back of the vehicle. 4x10" speakers are an excellent option for those looking to upgrade their car audio system without major modifications. Replacing factory-installed 4x10" speakers with higher-quality aftermarket ones can significantly improve sound clarity, imaging, and overall audio performance.
    Compatibility depends on your vehicle's make and model. While some cars come equipped with factory-installed 4x10" speakers in the rear, others may have different speaker sizes or configurations. Before purchasing 4x10" speakers, it's crucial to check your car's specifications and ensure that the rear deck or parcel shelf can accommodate this speaker size. Some vehicles may require custom brackets or modifications to fit 4x10" speakers properly. Using a fitment guide or consulting with a car audio professional can help you determine the compatibility and find the right speakers for your specific vehicle.
    4x10" speakers are primarily designed to handle mid-range and high-frequency sounds, and their ability to reproduce deep bass frequencies is limited due to their size. However, many aftermarket 4x10" speakers are engineered with improved bass response compared to factory-installed speakers. They may include features like larger voice coils and optimized cones to enhance low-end performance. Additionally, you can complement 4x10" speakers with a subwoofer or larger speakers dedicated to bass reproduction. Integrating a well-balanced audio system with properly tuned components can provide a satisfying and immersive listening experience in your car.
    The difficulty of installing 4x10" speakers varies depending on your car's make and model, as well as your experience with car audio installations. If your vehicle has accessible and straightforward speaker locations for 4x10" speakers, you may be able to handle the installation yourself with the proper tools and knowledge. Many aftermarket 4x10" speakers come with installation instructions and mounting accessories to facilitate the process. However, some cars may require more complex installation procedures, such as custom brackets or wiring adjustments. If you are unsure about the installation or lack experience, it's recommended to seek professional installation. Car audio experts can ensure a proper and secure fit, as well as optimize the audio settings for the best performance. Professional installation ensures that your new 4x10" speakers are set up correctly, allowing you to enjoy the full potential of your car audio system.

    If you're in search of superior audio upgrades for your car, look no further. Our vast collection of high-performance 4x10” speakers ensures that you'll find only the best products to elevate your in-car listening experience. Don't settle for subpar sound quality - explore our range now and discover the perfect 4x10” speakers that will take your driving pleasure to a whole new level!

    Advantages of 4x10” Speakers:

    4x10” speakers are renowned for their unique oval shape, making them an ideal choice for vehicles with limited space for speaker installation. Their design enables them to fit seamlessly into factory speaker locations, offering a hassle-free upgrade for your car's audio system. Despite their compact size, 4x10” speakers deliver powerful sound performance, producing clear highs and robust mid-range frequencies.

    One of the significant advantages of 4x10” speakers is their ability to enhance the overall audio clarity and detail. With their wider dispersion pattern, these speakers create an immersive soundstage, allowing you to experience your favorite music in a more captivating way. Whether you're navigating busy city streets or embarking on long road trips, the improved sound quality of 4x10” speakers will make every journey a memorable audio adventure.

    At Sonic Electronix, we take pride in offering a diverse selection of premium 4x10” speakers from leading brands in the industry. Our team of audio experts is dedicated to assisting you in finding the best 4x10” speakers that align with your preferences and vehicle requirements. Whether you seek enhanced bass response, crystal-clear vocals, or overall sound balance, we have the perfect 4x10” speakers to match your audio aspirations.

    For personalized guidance and expert advice, do not hesitate to contact our knowledgeable staff at 1-502-200-8010. Our audio specialists are committed to helping you create the ultimate car audio setup that caters to your unique audio preferences and driving style.

    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage

    Add vehicle
    2 | Make
    3 | Model
    Why Use a Vehicle Fit Guide?
    Where to find vehicle info | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.
    2 | Make
    3 | Model
    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo