Specials & Promotions

• 80 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel-Channel Amplifier

• Kicker CSC65 600W Peak 6.5-inch CS Series 2-Way Coaxial 4-ohm Speakers
• CSC693 900W Peak 6x9-inch CS Series 3-Way Coaxial Speakers with Integrated Midrange
• CXA360.4 360W RMS Class AB CX-Series 4-Channel Car Amplifier
• Belva BAK84 8-Gauge Premium CCA 4-Channel Amplifier Wiring Kit with RCA
• Sonic Electronix Premium Polyurethane Foam Can Insulator Sleeve Koozie

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 5.92"
• Sensitivity: 82.8 dB

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.0"
• Sensitivity: 87 dB

• 1000 watts Dual 10" Sealed Subwoofer Enclosure
• Dual 2 ohm Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 12.5" TD x 7.5" BD x 30.12" W x 12.20" H

• Works with both Factory and Aftermarket Audio Systems
• Single 12" Belva Subwoofer
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• Kicker 600W Peak 6.5-Inch CS Series 2-Way Coaxial 4-Ohm Speakers
• 900W Peak 6x9-Inch CS Series 3-Way Coaxial Speakers with Integrated Midrange
• NVX 1200W Peak N-Series Class-D 4-Channel Amplifier
• Full Spec 8 Gauge OFC Complete 4-Channel Amplifier Wiring Kit with RCA
• Premium Polyurethane Foam Can Insulator Sleeve Koozie with Sonic Electronix Logo

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 3-3/4"
• Sensitivity: 85.5 dB

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene cone
• Ribbed Santoprene surround
• Mount depth: 5-15/16"
• Sensitivity: 85.7 dB

• 4-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 500 Amp Battery Isolator
• 500 Amps at 12V Continuous
• 700 Amps Surge
• Switching Power: 10 - 16 VDC

• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter

• Fuse holder bracket for select 2018 Wrangler (JK)
• Mounts up to two ANL Fuse Blocks (sold separately)
• Easy to install, no drilling required

• 250 watts Peak Each, 125 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• RMS Power: 1200 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

• 135 Watts Max Each, 45 Watts RMS Each
•Semi Pressed Paper-Mica cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 93 dB

• Loaded Vehicle Specific Stealthbox Subwoofer Enclosure with Single JL Audio 10W3v3-2
• 500 Watts RMS Power Handling
• Stealthbox Installs into passenger-side rear cargo panel

• Peak Power: 600 watts
• RMS Power: 300 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 2-11/16"
• Sensitivity: 81.8 dB

• 300 watts Max Each, 100 watts RMS Each
• 1" Silk Dome Tweeter
• Polypropylene Cone
• Impedance: 4 ohm
• Sensitivity: 90 dB
• Multi-color RGB Illumination

• 375 watts Peak Each, 125 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 2.51"