DS18 EXL-SQ6.5 with Speaker Installation Kit
Includes: 6x9” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 6x9” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 275W RMS 6X9” PRO-ZT Series 2-Way Water Resistant Mid-Range Speaker with Built-in Bullet Tweeter
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Sound Dampening Rubber Roller
• Installer Panel Removal Tool Kit
Free or discounted install kits when available.
• 275W RMS 6X9” PRO-ZT Series 2-Way Water Resistant Mid-Range Speaker with Built-in Bullet Tweeter
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Sound Dampening Rubber Roller
• Installer Panel Removal Tool Kit
Cerwin-Vega PH84 with Speaker Installation Kit
360W RMS 8” Full-Range Speakera + 8” Speaker Baffles + Sound Dampening, Roller and Panel Removal Kit
360W RMS 8” Full-Range Speakera + 8” Speaker Baffles + Sound Dampening, Roller and Panel Removal Kit
• 360 watts Peak Each, 180 watts RMS Each
• Horn Tweeters
• cone material
• Impedance: 4 ohm
• Sensitivity: 103 dB
Free or discounted install kits when available.
• 360 watts Peak Each, 180 watts RMS Each
• Horn Tweeters
• cone material
• Impedance: 4 ohm
• Sensitivity: 103 dB
Hertz DSK130.3 with Speaker Installation Kit
Includes: (2) 5.25" 2-Way Component speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 5.25" 2-Way Component speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 60 Watts Max Each, 30 Watts RMS Each
• Water-repellent pressed paper cone material
• PEI Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 93 dB
Install kits available for most vehicles
• 60 Watts Max Each, 30 Watts RMS Each
• Water-repellent pressed paper cone material
• PEI Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 93 dB
Deaf Bonce Apocalypse AP-W81AC with Installation Accessories
1000W Peak (500W RMS) 8" Apocalypse Series Mid-Range Speakers
1000W Peak (500W RMS) 8" Apocalypse Series Mid-Range Speakers
• 500 watts Peak Each, 250 watts RMS Each
• Steel frame basket
• Paper cone material
• Impedance: 4 ohm
• Copper voice coil wire
Free or discounted install kits when available.
• 500 watts Peak Each, 250 watts RMS Each
• Steel frame basket
• Paper cone material
• Impedance: 4 ohm
• Copper voice coil wire
Earthquake Sound VTEK-693 with Installation Accessories
700W RMS 6" x 9" 3-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
700W RMS 6" x 9" 3-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 6" x 9" 3-way VTEK Series Coaxial Speakers
• Glass Fiber Cone
• 3/4" Silk Dome Tweeter
• 30mm KSV Voice Coil
• Speaker Grilles Included
• 4 Ohm Impedance
• PistonMax Technology
Free or discounted install kits when available.
• 6" x 9" 3-way VTEK Series Coaxial Speakers
• Glass Fiber Cone
• 3/4" Silk Dome Tweeter
• 30mm KSV Voice Coil
• Speaker Grilles Included
• 4 Ohm Impedance
• PistonMax Technology
MTX Audio RTX108 with Speaker Installation Kit
180W Peak (90W RMS) 5.25" Thunder Series 2-Way Component System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
180W Peak (90W RMS) 5.25" Thunder Series 2-Way Component System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• Peak Power: 180W • RMS Power: 90W
• 1" Soft Dome Tweeter
• Mounting Depth: 2.19"
• Polypropylene Cone and Rubber Surround
Free or discounted install kits when available.
• Peak Power: 180W • RMS Power: 90W
• 1" Soft Dome Tweeter
• Mounting Depth: 2.19"
• Polypropylene Cone and Rubber Surround
Diamond Audio DES525 with Speaker Installation Kit
240W Peak (120W RMS) 5.25" Elite Series 2-Way Coaxial Car Speakers + 5.25” Speaker Baffles, Sound Dampening, Roller and Panel Removal Kit
240W Peak (120W RMS) 5.25" Elite Series 2-Way Coaxial Car Speakers + 5.25” Speaker Baffles, Sound Dampening, Roller and Panel Removal Kit
• 100 watts Peak Each, 50 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite Fiber Weave cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB
Free or discounted install kits when available.
• 100 watts Peak Each, 50 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite Fiber Weave cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB
JL Audio C1-690 (Pair) with Speaker Installation Kit
450W Peak (120W RMS) 6" x 9" C1 2-Way Component Car Speakers (C1690) + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
450W Peak (120W RMS) 6" x 9" C1 2-Way Component Car Speakers (C1690) + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 225 Watts Max Each Side, 60 Watts RMS Each Side
• 1", Aluminum Dome Tweeter
• Mineral-Filled, Injection-Molded Polypropylene Cone
• 4 Ohm Impedance
• Sensitivity: 94 dB
• Mounting Depth: 2.75"
Free or discounted install kits when available.
• 225 Watts Max Each Side, 60 Watts RMS Each Side
• 1", Aluminum Dome Tweeter
• Mineral-Filled, Injection-Molded Polypropylene Cone
• 4 Ohm Impedance
• Sensitivity: 94 dB
• Mounting Depth: 2.75"
DS18 PRO-EXL68 with Speaker Installation Kit
Includes: 2 Mid-Range Loudspeakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Sound Damping Roller, and Panel Removal Kit
Includes: 2 Mid-Range Loudspeakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Sound Damping Roller, and Panel Removal Kit
• 225W 6.5” RMS PRO-HY Series Hybrid Mid-Range Speaker with Compression Horn Tweeter
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Free or discounted install kits when available.
• 225W 6.5” RMS PRO-HY Series Hybrid Mid-Range Speaker with Compression Horn Tweeter
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Cerwin-Vega PH654 with Speaker Installation Kit
Includes: (2) 6.5" Coaxial speaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 6.5" Coaxial speaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 300 Watts, 150 Watts RMS
•1.50” Double Layer High Temp Voice Coil
• BlackCoated Voice Coil former
• Advanced Voice Coil Heat Sink Design
Free or discounted install kits when available.
• 300 Watts, 150 Watts RMS
•1.50” Double Layer High Temp Voice Coil
• BlackCoated Voice Coil former
• Advanced Voice Coil Heat Sink Design
Alpine S2-S65C with Installation Accessories
480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System
480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Free or discounted install kits when available.
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Rockford Fosgate Power T152 with Sound Damping
240W Peak (120W RMS) 5.25" Power Series 2-way 4-ohm Coaxial Car Speakers + NVX SDBSK2 Premium Sound Damping
240W Peak (120W RMS) 5.25" Power Series 2-way 4-ohm Coaxial Car Speakers + NVX SDBSK2 Premium Sound Damping
• 120 watts Peak Each, 60 watts RMS Each
• 1" Aluminum Dome offset cantilever coaxial mounted tweeters
• Polypropylene-Carbon Fiber Hybrid cone material
• Impedance: 4 ohm
• Sensitivity: 86.5 dB
• 120 watts Peak Each, 60 watts RMS Each
• 1" Aluminum Dome offset cantilever coaxial mounted tweeters
• Polypropylene-Carbon Fiber Hybrid cone material
• Impedance: 4 ohm
• Sensitivity: 86.5 dB
Rockford Fosgate T16 with Sound Damping
280W Peak (140W RMS) 6" Power Series 2-way 4-ohm Coaxial Car Speakers + NVX SDBSK2 Premium Sound Damping
280W Peak (140W RMS) 6" Power Series 2-way 4-ohm Coaxial Car Speakers + NVX SDBSK2 Premium Sound Damping
• 140 watts Peak Each, 70 watts RMS Each
• 1" Aluminum Dome tweeters
• Carbon Fiber and Injection-molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 140 watts Peak Each, 70 watts RMS Each
• 1" Aluminum Dome tweeters
• Carbon Fiber and Injection-molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Rockford Fosgate Power T1675 with Sound Damping
300W Peak (150W RMS) 6.75” Power Series 2-way 4-ohm Full Range Car Speakers + NVX SDBSK2 Premium Sound Damping
300W Peak (150W RMS) 6.75” Power Series 2-way 4-ohm Full Range Car Speakers + NVX SDBSK2 Premium Sound Damping
• 150 watts Peak Each, 75 watts RMS Each
• 1" Aluminum Dome tweeters
• Carbon Fiber Reinforced IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• 150 watts Peak Each, 75 watts RMS Each
• 1" Aluminum Dome tweeters
• Carbon Fiber Reinforced IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
Cerwin-Vega PH84 with Sound Damping
720W Peak (360W RMS) 8” Pro Series Full-Range Coaxial Speakers + NVX SDSK2 Sound Damping
720W Peak (360W RMS) 8” Pro Series Full-Range Coaxial Speakers + NVX SDSK2 Sound Damping
• 360 watts Peak Each, 180 watts RMS Each
• Horn Tweeters
• Impedance: 4 ohm
• Sensitivity: 103 dB
• 360 watts Peak Each, 180 watts RMS Each
• Horn Tweeters
• Impedance: 4 ohm
• Sensitivity: 103 dB
DS18 PRO-ZT8 with Speaker Installation Kit
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 550 watts Max, 275 watts RMS
• 1" Aluminum Bullet Tweeter
• Impedance: 4 ohm
• Sensitivity: 98 dB
• Mounting Depth: 3.58"
Free or discounted install kits when available.
• 550 watts Max, 275 watts RMS
• 1" Aluminum Bullet Tweeter
• Impedance: 4 ohm
• Sensitivity: 98 dB
• Mounting Depth: 3.58"
DS18 PRO-X8MSE with Speaker Installation Kit
350W RMS 8" 4-Ohm Midrange Speakers + 8" Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
350W RMS 8" 4-Ohm Midrange Speakers + 8" Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 700 watts Peak Each, 350 watts RMS Each
• Aluminum Bullet Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 99 dB
Free or discounted install kits when available.
• 700 watts Peak Each, 350 watts RMS Each
• Aluminum Bullet Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 99 dB
Infinity REF507CF with Sound Damping
390W Peak (130W RMS) 5.25" Reference Series 2-way 4-ohm Component Speaker System + NVX SDSK2 Sound Damping
390W Peak (130W RMS) 5.25" Reference Series 2-way 4-ohm Component Speaker System + NVX SDSK2 Sound Damping
• 195 watts Peak Each, 65 watts RMS Each
• 3/4" Textile Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
• 195 watts Peak Each, 65 watts RMS Each
• 3/4" Textile Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
Hertz MPK163.3 with Speaker Installation Kit
6.5" Mille PRO Series 3-Way 4 Ohm Component speaker system
6.5" Mille PRO Series 3-Way 4 Ohm Component speaker system
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
Free or discounted install kits when available.
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
DS18 PRO-X10MBASS with Speaker Installation Kit
Includes: (2) 10” Mid-Bass Loudspeaker, Sound Damping Kit, Rubber Roller, Panel Removal Kit
Includes: (2) 10” Mid-Bass Loudspeaker, Sound Damping Kit, Rubber Roller, Panel Removal Kit
• 800 watts Max
• 400 watts RMS
• Paper cone material
• Impedance: 8 ohm
• Sensitivity: 96.3 dB
• Mounting Depth: 4.25"
Free or discounted install kits when available.
• 800 watts Max
• 400 watts RMS
• Paper cone material
• Impedance: 8 ohm
• Sensitivity: 96.3 dB
• Mounting Depth: 4.25"









































