NVX VSP68 with Speaker Installation Kit
(600W Max) V-Series 5" x 7" / 6" x 8" 2-Way Coaxial Car Audio Speakers with Speaker Baffles and Sound Deadening
(600W Max) V-Series 5" x 7" / 6" x 8" 2-Way Coaxial Car Audio Speakers with Speaker Baffles and Sound Deadening
• 300W Max each / 100W RMS each
• Stamped Steel Basket
• 4 Ohm Impedance
• Polypropylene Cone
• Nitrile Butadiene Rubber Surround
• 25mm Silk Dome Tweeter
Save $8 on install kits for this speaker
- Rear Deck Corner
• 300W Max each / 100W RMS each
• Stamped Steel Basket
• 4 Ohm Impedance
• Polypropylene Cone
• Nitrile Butadiene Rubber Surround
• 25mm Silk Dome Tweeter
Diamond Audio DES525 with Speaker Installation Kit
240W Peak (120W RMS) 5.25" Elite Series 2-Way Coaxial Car Speakers + 5.25” Speaker Baffles, Sound Dampening, Roller and Panel Removal Kit
240W Peak (120W RMS) 5.25" Elite Series 2-Way Coaxial Car Speakers + 5.25” Speaker Baffles, Sound Dampening, Roller and Panel Removal Kit
• 100 watts Peak Each, 50 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite Fiber Weave cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB
Free or discounted install kits when available.
• 100 watts Peak Each, 50 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite Fiber Weave cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB
Hertz DSK130.3 with Speaker Installation Kit
Includes: (2) 5.25" 2-Way Component speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 5.25" 2-Way Component speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 60 Watts Max Each, 30 Watts RMS Each
• Water-repellent pressed paper cone material
• PEI Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 93 dB
Install kits available for most vehicles
• 60 Watts Max Each, 30 Watts RMS Each
• Water-repellent pressed paper cone material
• PEI Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 93 dB
MTX Audio RTX108 with Speaker Installation Kit
180W Peak (90W RMS) 5.25" Thunder Series 2-Way Component System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
180W Peak (90W RMS) 5.25" Thunder Series 2-Way Component System with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• Peak Power: 180W • RMS Power: 90W
• 1" Soft Dome Tweeter
• Mounting Depth: 2.19"
• Polypropylene Cone and Rubber Surround
Free or discounted install kits when available.
• Peak Power: 180W • RMS Power: 90W
• 1" Soft Dome Tweeter
• Mounting Depth: 2.19"
• Polypropylene Cone and Rubber Surround
Polk Audio DB5252 with Installation Accessories
200W RMS 5.25” 2-way Car & Marine Component Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
200W RMS 5.25” 2-way Car & Marine Component Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 300 watts Peak Each, 100 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
Free or discounted install kits when available.
• 300 watts Peak Each, 100 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
DS18 PRO-EXL64 with Speaker Installation Kit
Includes: 5.25” Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, , Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 5.25” Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, , Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 200W RMS 5.25” PRO-FR Series Speaker
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Sound Dampening Rubber Roller
• Installer Panel Removal Tool Kit
Free or discounted install kits when available.
• 200W RMS 5.25” PRO-FR Series Speaker
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Sound Dampening Rubber Roller
• Installer Panel Removal Tool Kit
(4) Rockford Fosgate P1683 with Speaker Installation Kit
Rockford 130W RMS 6x8" Coaxial Speakers + NVX (2)SDKS2
Rockford 130W RMS 6x8" Coaxial Speakers + NVX (2)SDKS2
• 130 watts Peak Each, 65 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome Tweeters
• cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
Save $8 on install kits for this speaker
- Rear Deck Corner
Polk MM652 MM1 6.5" 600 Watt Coaxial Speakers + Sound Deadening & Roller
600W Peak (200W RMS) 6.5" 2-Way Coaxials with Sound Dampening and Application Roller
600W Peak (200W RMS) 6.5" 2-Way Coaxials with Sound Dampening and Application Roller
• 180 Watts Max Each, 80 Watts RMS Each Side
• 1", Terylene Fabric Tweeter
• 6.5" Titanium-Plated Polymer Midwoofer Cone
• 4 Ohm Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.62"
Save $16 on install kits for this speaker
- Rear Deck Corner with adapters required
• 180 Watts Max Each, 80 Watts RMS Each Side
• 1", Terylene Fabric Tweeter
• 6.5" Titanium-Plated Polymer Midwoofer Cone
• 4 Ohm Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.62"
Sony XS680GS with Speaker Installation Kit
460W Peak (80W RMS) 6"x8“ GS Series 2-way Coaxial Car Speakers
460W Peak (80W RMS) 6"x8“ GS Series 2-way Coaxial Car Speakers
• 230 watts Peak Each, 40 watts RMS Each
• Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
Save $8 on install kits for this speaker
- Rear Deck Corner
• 230 watts Peak Each, 40 watts RMS Each
• Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
Hertz CX 130 with Speaker Installation Kit
5.25" Cento Series 2-Way Coaxial Car Speakers
5.25" Cento Series 2-Way Coaxial Car Speakers
• 75 Watts Max Each, 25 Watts RMS Each
• Semi-pressed paper + Mica cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 92.5 dB
• Mounting Depth: 2"
Free or discounted install kits when available.
• 75 Watts Max Each, 25 Watts RMS Each
• Semi-pressed paper + Mica cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 92.5 dB
• Mounting Depth: 2"
JBL Stadium 862F with Speaker Installation Kit
6x8" 2-Way Coaxial Car Speakers with Sound Dampening, Speaker Baffles and Panel Removal Kit
6x8" 2-Way Coaxial Car Speakers with Sound Dampening, Speaker Baffles and Panel Removal Kit
• Peak Power: 300W
• RMS Power: 100W
• High-resolution 3/4" edge-driven textile dome tweeters
• Plus One™ fiberglass woofers cone
Save $8 on install kits for this speaker
- Rear Deck Corner
• Peak Power: 300W
• RMS Power: 100W
• High-resolution 3/4" edge-driven textile dome tweeters
• Plus One™ fiberglass woofers cone
Cerwin-Vega XED525C with Speaker Installation Kit
60W RMS 5.25” 2-Way Component Speakers + 5.25” Speaker Baffles + Sound Dampening, Roller and Panel Removal Kit
60W RMS 5.25” 2-Way Component Speakers + 5.25” Speaker Baffles + Sound Dampening, Roller and Panel Removal Kit
• 300 watts Peak Each, 30 watts RMS Each
• 1" Metallic Balanced Dome Tweeters
• Curvilinear polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
Free or discounted install kits when available.
• 300 watts Peak Each, 30 watts RMS Each
• 1" Metallic Balanced Dome Tweeters
• Curvilinear polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
Polk Audio DB6502 6.5" Component Speakers + Sound Dampening Kit
600W Peak (200W RMS) 6.5" DB+ Series 2-way Marine Component Speakers with Sound Dampening
600W Peak (200W RMS) 6.5" DB+ Series 2-way Marine Component Speakers with Sound Dampening
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohm Impedance
• Sensitivity: 92dB
• Mounting Depth: 1.77"
• IP65 rated
Save $16 on install kits for this speaker
- Rear Deck Corner with adapters required
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohm Impedance
• Sensitivity: 92dB
• Mounting Depth: 1.77"
• IP65 rated
Polk Audio MM652 6.5" Coaxial Speakers + Sound Dampening Kit
600W Peak (200W RMS) 6.5" Mobile Monitor Series 2-Way Coaxial Marine Speakers + Sound Dampening
600W Peak (200W RMS) 6.5" Mobile Monitor Series 2-Way Coaxial Marine Speakers + Sound Dampening
• 180 Watts Max Each, 80 Watts RMS Each Side
• 1", Terylene Fabric Tweeter
• 6.5" Titanium-Plated Polymer Midwoofer Cone
• 4 Ohm Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.62"
Save $8 on install kits for this speaker
- Rear Deck Corner with adapters required
• 180 Watts Max Each, 80 Watts RMS Each Side
• 1", Terylene Fabric Tweeter
• 6.5" Titanium-Plated Polymer Midwoofer Cone
• 4 Ohm Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.62"
Polk Audio DB652 with Installation Accessories
200W RMS 6.5" 2-way Car & Marine Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
200W RMS 6.5" 2-way Car & Marine Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 300 watts Peak Each, 100 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Free or discounted install kits when available.
• 300 watts Peak Each, 100 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Polk Audio DB5252 with Sound Dampening
600W Peak (300W RMS) 5.25" 2-Way Marine Grade Component Speakers (Pair) + SDSK2 Speaker Sound Dampening Kit - Two 10" x 10" Pieces
600W Peak (300W RMS) 5.25" 2-Way Marine Grade Component Speakers (Pair) + SDSK2 Speaker Sound Dampening Kit - Two 10" x 10" Pieces
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohm Impedance
• Sensitivity: 91dB
• Mounting Depth: 1.77"
• IP65 rated
Save up to $16 on install kits for this speaker
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohm Impedance
• Sensitivity: 91dB
• Mounting Depth: 1.77"
• IP65 rated
Infinity KAPPA53XF Speakers with Speaker Installation Kit
Kappa Series 5-1/4" 2-Way Coaxial Car Speakers with Speaker Baffles, Sound Dampening and a Heavy Duty Roller
Kappa Series 5-1/4" 2-Way Coaxial Car Speakers with Speaker Baffles, Sound Dampening and a Heavy Duty Roller
• Peak Power: 180W
• RMS Power: 60W
• Edge-driven silk dome tweeter
• Mounting Depth: 2 1/4"
• Plus One+ glass-fiber woofer cone
Free or discounted install kits when available.
• Peak Power: 180W
• RMS Power: 60W
• Edge-driven silk dome tweeter
• Mounting Depth: 2 1/4"
• Plus One+ glass-fiber woofer cone
Infinity Reference REF-5032CFX
90W RMS 5.25" Reference 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
90W RMS 5.25" Reference 2-Way Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 135 Watts Max Each, 45 Watts RMS Each
• Edge-Driven Textile Tweeter
• Plus One Polypropylene Oversized Cone
• 3 ohm Impedance
• Sensitivity: 92dB
• Mounting Depth: 1-15/16"
Free or discounted install kits when available.
• 135 Watts Max Each, 45 Watts RMS Each
• Edge-Driven Textile Tweeter
• Plus One Polypropylene Oversized Cone
• 3 ohm Impedance
• Sensitivity: 92dB
• Mounting Depth: 1-15/16"
Polk Audio (DB6502) 600 Watt 6.5" Component Speakers + Sound Dampening
600W Peak (300W RMS) 6.5" 2-Way Marine Grade Component Speakers (Pair) + SDSK2 Speaker Sound Dampening Kit - Two 10" x 10" Pieces
600W Peak (300W RMS) 6.5" 2-Way Marine Grade Component Speakers (Pair) + SDSK2 Speaker Sound Dampening Kit - Two 10" x 10" Pieces
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohm Impedance
• Sensitivity: 92dB
• Mounting Depth: 1.77"
• IP65 rated
Save $16 on install kits for this speaker
- Rear Deck Corner with adapters required
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohm Impedance
• Sensitivity: 92dB
• Mounting Depth: 1.77"
• IP65 rated
Kenwood eXcelon XR-1801P with Speaker Installation Kit
120W RMS 7" Hi-Res Audio Component Speaker System with Sound Dampening, Roller, and Panel Removal Kit
120W RMS 7" Hi-Res Audio Component Speaker System with Sound Dampening, Roller, and Panel Removal Kit
• 330 watts Peak Each, 120 watts RMS Each
• 1-3/16" Titanium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 87 dB
Save $16 on install kits for this speaker
- Rear Deck Corner with adapters required
• 330 watts Peak Each, 120 watts RMS Each
• 1-3/16" Titanium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 87 dB





































