Cerwin-Vega PH654 with Speaker Installation Kit
Includes: (2) 6.5" Coaxial speaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 6.5" Coaxial speaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 300 Watts, 150 Watts RMS
•1.50” Double Layer High Temp Voice Coil
• BlackCoated Voice Coil former
• Advanced Voice Coil Heat Sink Design
Save $35 on install kits for this speaker
- Far-Rear Side Panels with adapters required
- Front Door with adapters required
• 300 Watts, 150 Watts RMS
•1.50” Double Layer High Temp Voice Coil
• BlackCoated Voice Coil former
• Advanced Voice Coil Heat Sink Design
Rockford Fosgate T16 with Sound Damping
280W Peak (140W RMS) 6" Power Series 2-way 4-ohm Coaxial Car Speakers + NVX SDBSK2 Premium Sound Damping
280W Peak (140W RMS) 6" Power Series 2-way 4-ohm Coaxial Car Speakers + NVX SDBSK2 Premium Sound Damping
• 140 watts Peak Each, 70 watts RMS Each
• 1" Aluminum Dome tweeters
• Carbon Fiber and Injection-molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 140 watts Peak Each, 70 watts RMS Each
• 1" Aluminum Dome tweeters
• Carbon Fiber and Injection-molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Rockford Fosgate Power T1675 with Sound Damping
300W Peak (150W RMS) 6.75” Power Series 2-way 4-ohm Full Range Car Speakers + NVX SDBSK2 Premium Sound Damping
300W Peak (150W RMS) 6.75” Power Series 2-way 4-ohm Full Range Car Speakers + NVX SDBSK2 Premium Sound Damping
• 150 watts Peak Each, 75 watts RMS Each
• 1" Aluminum Dome tweeters
• Carbon Fiber Reinforced IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• 150 watts Peak Each, 75 watts RMS Each
• 1" Aluminum Dome tweeters
• Carbon Fiber Reinforced IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
Alpine S2-S65C with Sound Damping
480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System + NVX SDSK2 Sound Damping
480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System + NVX SDSK2 Sound Damping
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
JVC CS-DR601C with Sound Damping
720W Peak (120W RMS) 6.5" DRVN Series 2-way 4-ohm Component Speaker System + NVX SDBSK2 Premium Sound Damping
720W Peak (120W RMS) 6.5" DRVN Series 2-way 4-ohm Component Speaker System + NVX SDBSK2 Premium Sound Damping
• 360 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Carbon Mica cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 360 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Carbon Mica cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Rockford Fosgate Punch P16-S with Sound Damping
240W Peak (120W RMS) 6" Punch Series 2-way 4-ohm Component Speakers System + NVX SDBSK2 Premium Sound Damping
240W Peak (120W RMS) 6" Punch Series 2-way 4-ohm Component Speakers System + NVX SDBSK2 Premium Sound Damping
• 120 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome tweeters with recessed mount
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 87.2 dB
• 120 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome tweeters with recessed mount
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 87.2 dB
DS18 PRO-FR5NEO with Speaker Installation Kit
Includes: (2) 6.5” 2-Way Water Resistant Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Rubber Roller
Includes: (2) 6.5” 2-Way Water Resistant Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Rubber Roller
• 225W RMS 6.5” PRO-ZT series Water Resistant Mid-Range Speaker with Built-in Bullet Tweeter
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Rubber Roller
Save $35 on install kits for this speaker
- Far-Rear Side Panels with adapters required
- Front Door with adapters required
• 225W RMS 6.5” PRO-ZT series Water Resistant Mid-Range Speaker with Built-in Bullet Tweeter
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Rubber Roller
Alpine R2-S65C with Sound Damping
600W Peak (200W RMS) 6.5" R-Series 2-Way Component Speakers with Magnesium Hard-Dome Tweeters + NVX SDSK2 Sound Damping
600W Peak (200W RMS) 6.5" R-Series 2-Way Component Speakers with Magnesium Hard-Dome Tweeters + NVX SDSK2 Sound Damping
• 300 watts Peak Each, 100 watts RMS Each
• 1" Magnesium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 300 watts Peak Each, 100 watts RMS Each
• 1" Magnesium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Pioneer TS-A1601C with Sound Damping
700W Peak (160W RMS) 6.5” A-Series 2-way 4-ohm Component Speaker System + NVX SDBSK2 Premium Sound Damping
700W Peak (160W RMS) 6.5” A-Series 2-way 4-ohm Component Speaker System + NVX SDBSK2 Premium Sound Damping
• 350 watts Peak Each, 80 watts RMS Each
• PEI (Polyetherimide) Dome Tweeters
• Carbon and Mica Reinforced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
• 350 watts Peak Each, 80 watts RMS Each
• PEI (Polyetherimide) Dome Tweeters
• Carbon and Mica Reinforced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
Infinity Primus 603CF (PR603CF) with Sound Damping
360W Peak (120W RMS) 6.5" Primus Series 2-Way Component Speakers + NVX SDSK2 Sound Damping
360W Peak (120W RMS) 6.5" Primus Series 2-Way Component Speakers + NVX SDSK2 Sound Damping
• 180 watts Peak Each, 60 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB
• 180 watts Peak Each, 60 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB
Alpine S2-S65C with Installation Accessories
480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System
480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Save $35 on install kits for this speaker
- Far-Rear Side Panels with adapters required
- Front Door with adapters required
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Diamond Audio DES65C with Sound Damping
240W Peak (120W RMS) 6.5" DES Series 2-Way Component Speaker System + NVX SDSK2 Sound Damping
240W Peak (120W RMS) 6.5" DES Series 2-Way Component Speaker System + NVX SDSK2 Sound Damping
• 60 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite foam core carbon fiber cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
• 60 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite foam core carbon fiber cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
Hertz DCX87.3 with Sound Damping
120W Peak (60W RMS) 3.5” Dieci Series 2-Way Coaxial Car Speakers + NVX SDSK2 Sound Damping
120W Peak (60W RMS) 3.5” Dieci Series 2-Way Coaxial Car Speakers + NVX SDSK2 Sound Damping
• 60 watts Peak Each, 30 watts RMS Each
• 5/8 PEI (Polyetherimide) Dome Tweeters
• Water-repellent treated paper cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
• 60 watts Peak Each, 30 watts RMS Each
• 5/8 PEI (Polyetherimide) Dome Tweeters
• Water-repellent treated paper cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
NVX XSP652 with Sound Damping
600W Peak (200W RMS) 6.5" X-Series 2-Way Coaxial Speakers with Carbon Fiber Cones and 25mm Silk Dome Tweeters + NVX SDBSK2 Premium Sound Damping
600W Peak (200W RMS) 6.5" X-Series 2-Way Coaxial Speakers with Carbon Fiber Cones and 25mm Silk Dome Tweeters + NVX SDBSK2 Premium Sound Damping
• 300 watts Max Each, 100 watts RMS Each
• 1" Silk Dome Tweeters
• Lightweight Carbon Fiber cone
• Impedance: 4 ohm
• Sensitivity: 92 dB
• Mounting Depth: 2.52"
• 300 watts Max Each, 100 watts RMS Each
• 1" Silk Dome Tweeters
• Lightweight Carbon Fiber cone
• Impedance: 4 ohm
• Sensitivity: 92 dB
• Mounting Depth: 2.52"
Rockford Fosgate Punch P132 with Sound Damping
80W Peak (40W RMS) 3.5” Punch Series 2-way 4-ohm Full Range Speaker + NVX SDBSK2 Premium Sound Damping
80W Peak (40W RMS) 3.5” Punch Series 2-way 4-ohm Full Range Speaker + NVX SDBSK2 Premium Sound Damping
• 40 watts Peak Each, 20 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB
• 40 watts Peak Each, 20 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB
Cerwin-Vega XED62 with Sound Damping
600W Peak (70W RMS) 6.5" XED Series 2-Way Coaxial Car Speakers + NVX SDSK2 Sound Damping
600W Peak (70W RMS) 6.5" XED Series 2-Way Coaxial Car Speakers + NVX SDSK2 Sound Damping
• 300 watts Peak Each, 35 watts RMS Each
• 1" Metallic Balanced Dome Tweeters
• Curvilinear polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• 300 watts Peak Each, 35 watts RMS Each
• 1" Metallic Balanced Dome Tweeters
• Curvilinear polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
Cerwin-Vega XED650C with Sound Damping
600W Peak (70W RMS) 6.5" XED Series 2-Way Component Speaker System + NVX SDSK2 Sound Damping
600W Peak (70W RMS) 6.5" XED Series 2-Way Component Speaker System + NVX SDSK2 Sound Damping
• 300 watts Peak Each, 35 watts RMS Each
• 1/2" Metallic Balanced Dome Tweeters
• Curvilinear polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
• 300 watts Peak Each, 35 watts RMS Each
• 1/2" Metallic Balanced Dome Tweeters
• Curvilinear polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
Cerwin Vega H735 with Sound Damping
500W Peak (50W RMS) 3.5" HED Series 2-Way Coaxial Car Speakers + NVX SDSK2 Sound Damping
500W Peak (50W RMS) 3.5" HED Series 2-Way Coaxial Car Speakers + NVX SDSK2 Sound Damping
• 250 watts Peak Each, 25 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-Injected Reinforced Spun cone material
• Impedance: 4 ohm
• Sensitivity: 84.5 dB
• 250 watts Peak Each, 25 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-Injected Reinforced Spun cone material
• Impedance: 4 ohm
• Sensitivity: 84.5 dB
Cerwin Vega H7652 with Sound Damping
640W Max (120W RMS) 6.5" HED Series 2-Way Coaxial Car Speakers + NVX SDSK2 Sound Damping
640W Max (120W RMS) 6.5" HED Series 2-Way Coaxial Car Speakers + NVX SDSK2 Sound Damping
• 320 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
• 320 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
Hertz SV 165 NEO with Sound Damping
800W Peak (300W RMS) 6.5" SPL Show Series 4-ohms Midrange Car Speakers + NVX SDSK2 Sound Damping
800W Peak (300W RMS) 6.5" SPL Show Series 4-ohms Midrange Car Speakers + NVX SDSK2 Sound Damping
• 400 watts Peak Each, 150 watts RMS Each
• 1-1/2" Dome Tweeters
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB
• 400 watts Peak Each, 150 watts RMS Each
• 1-1/2" Dome Tweeters
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB









































