Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Specials & Promotions
  3. Marine & Powersports Deals

Marine & Powersports Deals

Filters
Amplifiers with a wiring kit ✕
Clear Filters
Reset Done
Product Type
Amplifiers with a wiring kit,
Price Range
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Availability

Shop the Category

filter-icon Filters & Sort

Stinger SPX700X4 + NVX XKIT84 8 Gauge Amp Wiring Kit

700W RMS Series 4 ohm Stable 4-Channel Class-D Powersports Amplifier w/ Remote Level Control

SPX700X4, XKIT84 big
Go to item page Right Arrow Icon of Right Arrow

Stinger SPX700X4 + NVX XKIT84 8 Gauge Amp Wiring Kit

700W RMS Series 4 ohm Stable 4-Channel Class-D Powersports Amplifier w/ Remote Level Control

• 125 Watts RMS x 4 @ 4 ohm
• 175 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 700 Watts
• CEA-2006 Compliant
• 0 to 12 dB Bass Boost
• Aluminum Heatsink
• For Powersports Applications
• Includes NVX XKIT84 8 Gauge Amp Wiring Kit

shipping truck icon Free shipping in USA. Provide zip for delivery date.
39
List price $736.99
-50% $365.40

In stock

Only 3 Left!

Add to Cart

• 125 Watts RMS x 4 @ 4 ohm
• 175 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 700 Watts
• CEA-2006 Compliant
• 0 to 12 dB Bass Boost
• Aluminum Heatsink
• For Powersports Applications
• Includes NVX XKIT84 8 Gauge Amp Wiring Kit

Cerwin Vega B54 with Belva 4 Gauge Amp Kit

1200W 4-Channel Bomber Series Class D Amplifier with 4 Gauge Amp Kit

B54, BAK44 big
Go to item page Right Arrow Icon of Right Arrow

Cerwin Vega B54 with Belva 4 Gauge Amp Kit

1200W 4-Channel Bomber Series Class D Amplifier with 4 Gauge Amp Kit

• RMS: 80 Watts x 4 @ 4 ohm, 150 Watts x 4 @ 2 ohm, Bridged: 300 Watts x 2 @ 4 ohm
• Total Peak Power: 1000 Watts
• Class D IR Chipset with DirectFET Power Mosfet Output
• Wired remote bass level control included
• Ultra Compact High Density Aluminum Alloy Chassis
• Dimensions: 4.02" W x 8.70" L x 1.40" H

shipping truck icon Free shipping in USA. Provide zip for delivery date.
32
List price $511.98
-30% $359.99

In stock

Only 2 Left!

Add to Cart

• RMS: 80 Watts x 4 @ 4 ohm, 150 Watts x 4 @ 2 ohm, Bridged: 300 Watts x 2 @ 4 ohm
• Total Peak Power: 1000 Watts
• Class D IR Chipset with DirectFET Power Mosfet Output
• Wired remote bass level control included
• Ultra Compact High Density Aluminum Alloy Chassis
• Dimensions: 4.02" W x 8.70" L x 1.40" H

MB Quart NA2-320.4 + Belva BAK84 8 Gauge Amp Wiring Kit

320W Max NA2 Series Class-D 4-Channel 2 ohm Stable Amplifier

NA2-320.4, BAK84 big
Go to item page Right Arrow Icon of Right Arrow

MB Quart NA2-320.4 + Belva BAK84 8 Gauge Amp Wiring Kit

320W Max NA2 Series Class-D 4-Channel 2 ohm Stable Amplifier

• 40 watts RMS x 4 @ 4 ohm
• 80 watts RMS x 4 @ 2 ohm
• 320 watts Total Power
• Switchable High-Pass Filters
• 0-12dB Boost
• Aluminum Heatsink
• Dimensions: 3.7" W x 5.51" L x 1.77" H
• Includes Belva BAK84 8 Gauge Amp Wiring Kit

Save 15% Off Package Deals at Checkout!
shipping truck icon Free shipping in USA. Provide zip for delivery date.
38
List price $304.99
-19% $246.24

In stock

Add to Cart

• 40 watts RMS x 4 @ 4 ohm
• 80 watts RMS x 4 @ 2 ohm
• 320 watts Total Power
• Switchable High-Pass Filters
• 0-12dB Boost
• Aluminum Heatsink
• Dimensions: 3.7" W x 5.51" L x 1.77" H
• Includes Belva BAK84 8 Gauge Amp Wiring Kit

Rockford PM100X1K + NVX XKIT82 8 Gauge Amp Wiring Kit

Two Compact Full-Range Monoblock Amplifiers 60 watts RMS x 1 (each)

PM100X1K, XKIT82 big
Go to item page Right Arrow Icon of Right Arrow

Rockford PM100X1K + NVX XKIT82 8 Gauge Amp Wiring Kit

Two Compact Full-Range Monoblock Amplifiers 60 watts RMS x 1 (each)

• PM100X1K
• Punch Marine 100 Watt Full-Range Mono Amplifier (pair)
• Number of Channels: 1
• Frequency Response: 60Hz - 20kHz +/- 1.0dB
• Includes NVX XKIT82 8 Gauge Amp Wiring Kit

Save 15% Off Package Deals at Checkout!
shipping truck icon Free shipping in USA. Provide zip for delivery date.
60
List price $405.98
$389.98

In stock

Only 2 Left!

Add to Cart

• PM100X1K
• Punch Marine 100 Watt Full-Range Mono Amplifier (pair)
• Number of Channels: 1
• Frequency Response: 60Hz - 20kHz +/- 1.0dB
• Includes NVX XKIT82 8 Gauge Amp Wiring Kit

Rockford Fosgate Punch PM500X2 + NVX XKIT42 4 Gauge Amp Wiring Kit

500W Punch Series Class A/B 2-Channel Marine Amplifier

PM500X2, XKIT42 big
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate Punch PM500X2 + NVX XKIT42 4 Gauge Amp Wiring Kit

500W Punch Series Class A/B 2-Channel Marine Amplifier

• 150 watts RMS x 2 chan. @ 4 ohm
• 250 watts RMS x 2 chan. @ 2 ohm
• 500 watts RMS x 1 chan. @ 4 ohm Bridged
• CEA-2006 Compliant
• Features C.L.E.A.N. Set-up
• Protected against Dust, UV, & Corrosion
• Marine grade two part epoxy coating on circuit boards
• Includes NVX XKIT42 4 Gauge Amp Wiring Kit

shipping truck icon Free shipping in USA. Provide zip for delivery date.
124
List price $693.98
-17% $577.49

In stock

Only 3 Left!

Add to Cart

• 150 watts RMS x 2 chan. @ 4 ohm
• 250 watts RMS x 2 chan. @ 2 ohm
• 500 watts RMS x 1 chan. @ 4 ohm Bridged
• CEA-2006 Compliant
• Features C.L.E.A.N. Set-up
• Protected against Dust, UV, & Corrosion
• Marine grade two part epoxy coating on circuit boards
• Includes NVX XKIT42 4 Gauge Amp Wiring Kit

Rockford Fosgate M2-200X2 + NVX XKIT42 4 Gauge Amp Wiring Kit

200 Watts RMS 2-Channel Marine Amplifier

M2-200X2, XKIT42 big
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate M2-200X2 + NVX XKIT42 4 Gauge Amp Wiring Kit

200 Watts RMS 2-Channel Marine Amplifier

• 50 Watts x 2 @ 4 ohm
• 100 Watts x 2 @ 2 ohm
• 200 Watts x 1 @ 4ohm Bridged/Mono
• Full-Range Efficient Class-D
• 2-Channel Element Ready Amplifier
• CEA-2006 Compliant & CE Compliant

• Includes NVX XKIT42 4 Gauge Amp Wiring Kit

Save 15% Off Package Deals at Checkout!
shipping truck icon Free shipping in USA. Provide zip for delivery date.
124
List price $443.98
-20% $354.98

In stock

Only 2 Left!

Add to Cart

• 50 Watts x 2 @ 4 ohm
• 100 Watts x 2 @ 2 ohm
• 200 Watts x 1 @ 4ohm Bridged/Mono
• Full-Range Efficient Class-D
• 2-Channel Element Ready Amplifier
• CEA-2006 Compliant & CE Compliant

• Includes NVX XKIT42 4 Gauge Amp Wiring Kit

Cerwin Vega SRPM1000.1DW with Amplifier Wiring kit

Stroker Series Monoblock Marine Amplifier - White (1000W RMS)

SRPM1000.1DW, XKIT42 big
Go to item page Right Arrow Icon of Right Arrow

Cerwin Vega SRPM1000.1DW with Amplifier Wiring kit

Stroker Series Monoblock Marine Amplifier - White (1000W RMS)

• RMS Power: 1000 Watts x 1 @ 1Ω / 750 Watts x 1 @ 2Ω / 400 Watts x 1 @ 4Ω
• Superior Full Range Class D Design
• Conformal Coated PCB To Protect Against Moisture, Vibration/Mechanical Stress
• Top Mount Controls For Quick Precise Adjustments
• Frequency Response: 10-350KHz

Save 15% Off Package Deals at Checkout!
shipping truck icon Free shipping in USA. Provide zip for delivery date.
124
List price $863.98
-36% $554.98

In stock.

Add to Cart

• RMS Power: 1000 Watts x 1 @ 1Ω / 750 Watts x 1 @ 2Ω / 400 Watts x 1 @ 4Ω
• Superior Full Range Class D Design
• Conformal Coated PCB To Protect Against Moisture, Vibration/Mechanical Stress
• Top Mount Controls For Quick Precise Adjustments
• Frequency Response: 10-350KHz

Lowest price in 30 days

Rockford Fosgate Punch PBR300X2 + NVX XKIT82 8 Gauge Amp Wiring Kit

300 Watts Punch Series Boosted Rail Compact 2-Channel Amplifier

PBR300X2, XKIT82 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate Punch PBR300X2 + NVX XKIT82 8 Gauge Amp Wiring Kit

300 Watts Punch Series Boosted Rail Compact 2-Channel Amplifier

• RMS 100W x 2 @ 4 ohm, 150W x 2 @ 2 ohm, 300W x 1 @ 4 ohm Bridged
• Features Rockford Fosgate's Class-BR Topology
• CEA-2006 Compliant
• Ultra Compact Chassis
• Boosted Rail Design
• Dimensions: 6.75"L x 4.25"W x 1.53"H
• Includes NVX XKIT82 8 Gauge Amp Wiring Kit

Save 15% Off Package Deals at Checkout!
82
List price $375.98
-12% $329.98
Notify Me

• RMS 100W x 2 @ 4 ohm, 150W x 2 @ 2 ohm, 300W x 1 @ 4 ohm Bridged
• Features Rockford Fosgate's Class-BR Topology
• CEA-2006 Compliant
• Ultra Compact Chassis
• Boosted Rail Design
• Dimensions: 6.75"L x 4.25"W x 1.53"H
• Includes NVX XKIT82 8 Gauge Amp Wiring Kit

Rockford Fosgate Punch PM1000X5 with Amplifier Wiring Kit

1000W 5-Channel Powersports/Marine Amplifier

PM1000X5, XKIT46 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate Punch PM1000X5 with Amplifier Wiring Kit

1000W 5-Channel Powersports/Marine Amplifier

• RMS: 75 watts x 4 chan. + 150 watts x 1 chan. @ 4 ohm, 125 watts x 4 chan. + 300 watts x 1 chan. @ 2 ohm
• CEA-2006 Compliant
• Features C.L.E.A.N. Set-up
• Protected against Dust, UV, & Corrosion
• Marine grade two part epoxy coating on circuit boards
• Includes NVX XKIT46 4 Gauge Amp Wiring Kit

46
List price $979.98
-18% $799.99
Notify Me

• RMS: 75 watts x 4 chan. + 150 watts x 1 chan. @ 4 ohm, 125 watts x 4 chan. + 300 watts x 1 chan. @ 2 ohm
• CEA-2006 Compliant
• Features C.L.E.A.N. Set-up
• Protected against Dust, UV, & Corrosion
• Marine grade two part epoxy coating on circuit boards
• Includes NVX XKIT46 4 Gauge Amp Wiring Kit

 
    Clear all
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    1999 Dodge Intrepid

    2019 Audi A5 Sportback

    1996 Lexus LS400

    2010 Dodge Ram 2500

    2015 Dodge Charger

    2011 Acura TSX

    2008 Kia Spectra

    2010 Audi TT

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 1999 Intrepid
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo